Manual.ly Logo

D.A.S. Vantec-118A Manual

0.0 · 0 Ratings

PDF manual · 25 Pages

English

M: QW-35-FL
page

/ 25

Loading...
5b7bd6b63dc70df5023c618ba2fb126106ea page 13
19
Absolutely no risks should be taken with
regards to public safety. When flying enclosures
from ceiling support structures, extreme care
should be taken to assure the load bearing
capabilities of the structures so that the
installation is absolutely safe. Do not fly enclosures
from unsafe structures. Consult a certified
professional if needed. All flying accessories that
are not supplied by DAS Audio are the user's
responsibility. Use at your own risk.
The DAS VANTEC-20A incorporates structures in
each side of the enclosure. Thess ironworks are
made of steel and aluminum and are fixed with
special screws in the wood side of the two systems.
On each one of these structures there is a steel rod
with a special axis screw which allows to stack or
rig the enclosures. The angles vary from 15º to 15º
with each VANTEC-20A. This system allows for easy
and safe rigging or stacking, with safety pins.
Flyable vantec series models feature internal
steel angles, so that flying points are available.
Eyebolt flying points are factory sealed with M10
screws, which are replaced with eyebolts on the
flying points as required. Flying with eyebolts is
very economical and safe, and is specially
recommended for installations where the boxes
are permanently fixed.
To perform any operations related to flying the
system, read the present document first, and act
on the warnings and advice given. The goal is to
allow the user to become familiar with the
mechanical elements required to fly the acoustic
system, as well as the safety measures to be taken
during set-up and teardown.
Only experienced installers with adequate
knowledge of the equipment and local safety
regulations should fly speaker boxes. It is the user's
responsibility to ensure that the systems to be
flown (including flying accessories) comply with
state and local regulations.
The working load limits in this manual are the
results of tests by independent laboratories. It is
the user's responsibility to stay within safe limits. It
is the user's responsibility to follow and comply
with safety factors, resistance values, periodical
supervisions and warnings given in this manual.
Product improvement by means of research and
development is on going at DAS. Specifications are
subject to change without notice.
It is common practice to apply 5:1 safety factors
for enclosures and static elements. For slings and
elements exposed to material fatigue due to
friction and load variation the following ratios
must be met; 5:1 for steel cable slings, 4:1 for steel
chain slings and 7:1 polyester slings. Thus, an
element with a breaking load limit of 1000 kg may
be statically loaded with 200 kg (5:1 safety factor)
and dynamically loaded with 142 kg (7:1 safety
factor).
When flying a system, the working load must
be lower than the resistance of each individual
flying point in the enclosure, as well as each box.
Hanging hardware should be regularly inspected
and suspect units replaced if in doubt. This is
important to avoid injury and absolutely no risks
should be taken in this respect. It is highly
recommended that you implement an inspection
and maintenance program on flying elements,
including reports to be filled out by the personnel
that will carry out the inspections. Local
regulations may exist that, in case of accident, may
require you to present evidence of inspection
reports and corrective actions after defects were
found.
Manual del Usuario / vantec series / User’s Manual
RIGGING
Warning

Chat with your D.A.S. Vantec-118A manual using AI

Get instant AI answers from your D.A.S. Vantec-118A manual

Ask anything about the D.A.S. Vantec-118A. Answers come from this manual, with the pages they are based on.

Vantec-118A Maintenance Schedule

Regularly
Inspect hanging hardware and replace suspect units

Hanging hardware should be regularly inspected and suspect units replaced if in doubt to avoid injury. Implement an inspection and maintenance program on flying elements.

Show in the manual (page 19)
As needed
Clean enclosure with a dry cloth

Clean only with a dry cloth. Do not use any solvent based cleaners.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Vantec-118A?

Yes No

Frequently Asked Questions

A

The equipment is designed to function between 15 degrees Celsius and 45 degrees Celsius with a relative humidity of 95%. It should not be exposed to rain or moisture.

Is this answer helpful?

A

Yes, the rigging system is compatible with the Vantec-20A. You can create arrays or stacks using the included hardware and safety pins.

Is this answer helpful?

A

Access the Options menu via the DAScontrol encoder. Select Reset Device to restore default values for settings like Number Of Units and High Pass Filter.

Is this answer helpful?

A

Yes, it has an IP-20 rating, meaning it is protected against solid objects but not water. It is safe for indoor professional environments.

Is this answer helpful?

A

All products are warranted against any manufacturing defect for a period of 24 months from the date of purchase by an authorized dealer.

Is this answer helpful?

A

Use the balanced XLR input connectors on the rear panel. Ensure the cable is not too long to avoid interference issues.

Is this answer helpful?

A

Use only qualified personnel and certified flying accessories. Calculate working load limits and inspect rigging elements regularly for fatigue.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High 2000Wpeak Class D Amplifier Power
  • Deep-Loud Bass EQ Switch
  • Integrated Rigging System Compatibility
  • DSP with Variable Low-Pass Filter
  • Robust Baltic Birch Plywood Enclosure
VS

Disadvantages

  • Heavy Weight of 45.2 Kilograms
  • Class A Product May Cause Radio Interference
  • Requires Qualified Personnel for Rigging
  • Not User Serviceable Internally
  • Stricter Safety Regulations for Flying
M: QW-35-FL

Product Specification

Subwoofer

1x 18"

Amplifier

Active

Frequency Range

35Hz-125Hz (-10dB)

Power

1,000W RMS, 2,000W Peak

Max SPL

134dB

Dimensions

24.02x19.09x30.71 in (WxHxD)

Weight

99.65 lbs

M: QW-35-FL

Product Description

Professional Audio Power with the D.A.S. Vantec-118A

Unleash Deep Bass Performance

The D.A.S. Vantec-118A Piece stands as a powerhouse in modern professional audio reinforcement systems. This active front-loaded subwoofer system delivers exceptional low-end performance suitable for diverse live event applications and large venues. Whether for corporate events or permanent installations, this unit provides the necessary depth without compromising clarity on stage. The enclosure features a robust 118FW transducer driven by a Class D amplifier rating of two thousand watts peak power. This configuration ensures deep thunderous bass output while maintaining efficiency and reliability.

Digital Control and Connectivity

Audio engineers value the onboard digital signal processing capabilities significantly. A unique Deep-Loud bass EQ switch allows users to tailor the frequency response dynamically. Select Deep for subwoofer type response or Loud for hitting performances during concerts. The variable low-pass filter ranges from 80 Hz to 125 Hz for precise alignment with highs. This eliminates the need for external processing when paired with companion top speakers seamlessly.

Structural Integration and Safety

Integration is seamless thanks to the integrated rigging system included in the design. The unit connects easily to Vantec-20A satellite speakers for complete sound arrays. Stacking or flying options expand versatility for any venue size requirement. Power connections utilize reliable PowerCon connectors to ensure stable electrical flow. Signal routing is simplified with balanced XLR inputs and loop-thru outputs for daisy chaining multiple units together efficiently.

Durability and Maintenance Standards

Durability is a hallmark of this equipment manufacturing process. The enclosure is crafted from Baltic birch plywood with a protective ISO-flex finish. Safety precautions are noted regarding moisture and temperature ranges during operation. Class A compliance ensures electromagnetic compatibility in professional settings without interference. A two-year warranty covers manufacturing defects against improper use conditions effectively.

Installation and Operational Safety

Final notes on installation emphasize structural safety for flown configurations strictly. Qualified installers must verify loadbearing capabilities of ceiling supports before rigging. The unit works best when connected to ground power outlets for safety. Regular inspections of flying elements prevent accidents during use phases. This piece completes the Vantec series ecosystem perfectly for large scale audio setups.

Control Panel Features

Operators appreciate the rear panel LED indicators for power status and signal presence. Visual feedback helps troubleshoot issues quickly during events. The ON switch is conveniently located on the backplate. This design minimizes operator error during setup phases. Adjusting polarity ensures phase coherence for optimal sound quality.

M: QW-35-FL

© Copyright 2026 Manual.ly