Manual.ly Logo

DAP Audio Qi-4400 Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 16

Loading...
a967f5ef51a54d4bd8696fc7a6d61b12a52c page d
12
Ordercode: D4530 / D4531 / D4532
Qi-4200 / 4400 / 4600
Product Specifications
Rated power / model
Qi-4200
Qi-4400
Qi-4600
1kHz (HIA) with 1%THD
4Ω stereo (per channel):
4 x 200W
4 x 400W
4 x 600W
8Ω stereo (per channel):
4 x 120W
4 x 250W
4 x 360W
8Ω bridge mono:
2 x 400W
2 x 800W
2 x 1200W
Power supply:
120-230VAC, 60/50Hz
Power consumption (2 x 4Ω):
1100W
Max Input Voltage:
+20dBu
Performance
Frequency Response (at 1 Watt):
+/-2dB
Input Sensitivity for full rated power
at 8Ω:
0.65V
0.7V
0.775V
Input impedance:
20kΩ balanced, 10kΩ unbalanced
S/N:
>90dB
VR residual sound:
>85dB
AMP efficiency:
>93%
Front panel controls:
AC power switch, CH1 - CH4 gain control
Ground-lift:
No
Signal to Noise Ratio:
-96.5dB Flat, -100dB(A)
Amplifier protection:
Short circuit thermal, turn-on and –off muting, DC fault
output and RF protection
Control
Output modes
Stereo / mono / bridge
LED indicators:
Power ON - Blue
Protect – Orange
Signal – Green
Limit – Red
Inputs:
4 x 3-pin XLR
Outputs:
4 x Speakon
AMP class:
Class D
Construction
Cooling system:
Variable speed cooling fan
Dimensions:
483 x 390 x 44 mm (LxWxH)
19 inch x 1HE (LxH)
Weight:
6.4 kg
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: service@highlite.nl

Chat with your DAP Audio Qi-4400 manual using AI

Get instant AI answers from your DAP Audio Qi-4400 manual

Ask anything about the DAP Audio Qi-4400. Answers come from this manual, with the pages they are based on.

Qi-4400 Maintenance Schedule

Regularly
Clean the device exterior

Disconnect from mains and wipe with a damp cloth. Do not use alcohol or solvents. Ensure device is cool before cleaning.

Show in the manual (page 13)
Regularly
Clean audio connections

Disconnect from mains and wipe audio connectors with a damp cloth. Ensure all connections are completely dry before reconnecting power.

Show in the manual (page 13)
Regularly
Inspect cables for damage

Check the condition of cables regularly to prevent issues like poor contacts or hum loops caused by defective cables.

Show in the manual (page 12)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Qi-4400?

Yes No

Frequently Asked Questions

A

In stereo mode at 4 ohms, it delivers 1600W total, split across four channels. In bridge mono mode, it produces 1600W across two channels.

Is this answer helpful?

A

No, you can only bridge pairs. Mode switches allow channel 1 and 2 to bridge, and 3 and 4 to bridge.

Is this answer helpful?

A

Ensure all connected devices share a common electrical power circuit and use a star system ground point.

Is this answer helpful?

A

It is not designed for permanent continuous operation. Consistent breaks are recommended to ensure longevity.

Is this answer helpful?

A

The unit enters protection mode due to overload or heat. Switch off and identify the problem before restarting.

Is this answer helpful?

A

No, impedance lower than 2 ohms in stereo mode causes a short circuit risk.

Is this answer helpful?

A

The manufacturer offers a warranty valid for one year from the official date of purchase.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • High efficiency Class D design reduces heat generation significantly.
  • Four distinct output channels provide great versatility for stereo systems.
  • Built-in protection circuits guard against short circuits and overheating.
  • Compact rack format fits well into standard 19-inch server racks.
  • Variable cooling fan reduces noise during low volume listening sessions.
VS

Disadvantages

  • Lack of ground lift switch can complicate grounding requirements.
  • Specific impedance limits exist for bridge mode connections.
  • Protection LED requires immediate shutdown if triggered during operation.
  • Requires original packaging for warranty returns to remain valid.
  • Input gain must be set carefully to avoid distorting signal sources.
M: qwen/qwen3.5-flash-20260224

Product Specification

Channels

4

Power 8 Ohm

4x 250W, 800W (bridged)

Power 4 Ohm

4x 400W, 800W (bridged)

Dimensions

19.02 x 1.73 x 15.35 inches (W x H x D), 19" 1U

Weight

14.11 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Discovering Power with the DAP Audio Range

The audio community often seeks reliable equipment that delivers consistent performance without compromising on sound quality. When enthusiasts look for a robust solution for live events or studio setups, the information known in the DAP Audio Qi-4400 Manual highlights this Class D powerhouse. This amplifier series is designed for professionals who demand high output levels within a compact form factor. The Qi-series family includes the Qi-4200, Qi-4400, and Qi-4600 models, catering to varying power requirements while maintaining identical structural excellence.

Core Features and Performance

At the heart of the Qi-4400 lies a modern Class D architecture, offering superior efficiency greater than 93 percent. This design ensures that the unit generates heat while maintaining high output capabilities. Users benefit from four channels of amplification, each capable of delivering significant power depending on the configuration. The stereo output allows for standard 4x 400W operation at 4 ohms. For those needing more voltage, the mono mode provides substantial power delivery through bridge connections.

Versatile Connectivity

Connectivity plays a crucial role in any professional system. The back panel features four Speakon speaker outputs and four 3-pin XLR balanced inputs. This setup allows for easy integration with mixers and digital sources. Users can configure the modes using switches on the rear panel to switch between stereo, mono, or bridge modes across channels. This flexibility ensures the device adapts to different speaker setups efficiently.

Safety and Operation

Proper operation guarantees longevity. Safety instructions emphasize grounding the device correctly to avoid ground loops. Always ensure the power switch is on before setting volume to zero to prevent supersonic frequencies that could damage speakers. The front panel includes intelligent LEDs indicating power status, protection modes, and signal limits. If the protection light turns on, the system has detected issues like overheat or overload, requiring immediate shutdown to prevent damage.

Maintenance and Support

Regular maintenance keeps the Qi unit in top condition. Keeping connections clean and ensuring airflow through the intake grill is vital. Because the fan speed varies with temperature, noise levels adapt to workload needs. Warranty information is clear, covering one year from purchase. Dealers recommend retaining original packaging for returns or shipments to protect the investment. Essential details ensure safe usage and proper installation protocols are followed.

Technical Specifications and Weight

The physical dimensions measure 483 by 390 mm with a height of 44 mm. Weighing 6.4 kg, it remains portable for touring yet sturdy for fixed installations. The input impedance supports balanced connections effectively. Frequency response remains flat within two decibels tolerance for accurate audio reproduction. High efficiency amplifiers ensure less electrical draw compared to traditional Class AB units.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly