Cyrus PSX-R2 Manual
PDF manual · 11 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Cyrus PSX-R2 manual using AI
Get instant AI answers from your Cyrus PSX-R2 manual
Ask anything about the Cyrus PSX-R2. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend PSX-R2?
Yes NoFrequently Asked Questions
The PSX-R2 is an external regulated DC power supply that provides low-noise, stable power to compatible Cyrus audio components, improving dynamics, resolution and reducing mains-borne interference for better sonic performance.
Is this answer helpful?
Plug the IEC mains cable into the PSX-R2 rear inlet, fit the ferrite clamp on the mains cable as instructed, then connect the 5-pin PSX-R umbilical to the PSX-R socket on the Cyrus component until it latches securely.
Is this answer helpful?
Some early Cyrus units (e.g., Cyrus III, IIIi, 7, Power) require internal modification by an authorized Cyrus dealer to accept the PSX-R2. Do not attempt internal changes yourself; consult a dealer for compatibility and conversion.
Is this answer helpful?
Ensure correct mains voltage before connecting, maintain ventilation, avoid moisture and heat, route power cords to avoid pinching, and have fuse replacement or repairs performed by qualified service personnel to prevent hazards and preserve warranty.
Is this answer helpful?
Notable specs include tight load regulation (around 0.2% under defined load), very low output noise (<40 μV at specified conditions), and ripple rejection greater than 67 dB, plus selectable output ranges to match different Cyrus components.
Is this answer helpful?
The two-year warranty covers manufacturing defects for the original purchaser. It excludes damage from neglect, misuse, unauthorized repairs, incorrect installation, transit damage, and consequential loss. Retain proof of purchase for claims and use authorized service channels.
Is this answer helpful?
The supplied ferrite clamp fits around the mains cable close to the plug and helps suppress high-frequency interference from the domestic mains, reducing noise that can degrade the audio performance of connected equipment.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Highly regulated output with two-stage regulation for excellent isolation from mains disturbances.
- Very low output noise (<40 μV) and strong ripple rejection (>67 dB) for improved audio clarity.
- Compact die-cast chassis delivers robust build quality and effective thermal handling.
- Simple 5-pin PSX-R umbilical connection for a single-cable link to compatible Cyrus components.
- Ferrite clamp supplied to further reduce mains-borne interference and improve performance.
Disadvantages
- Requires compatible Cyrus products with PSX-R socket; older models may need dealer modification.
- Not user-serviceable; servicing must be performed by authorized technicians to preserve warranty.
- Adds additional mains connection and footprint in the system, requiring ventilation and space.
- Warranty exclusions for misuse or unauthorized repairs may complicate out-of-warranty fixes.
- Fuse replacement specifications differ by region and must be matched correctly to avoid damage.
Product Specification
Type
Power Supply
Product Description
Cyrus PSX-R2 — Intelligent Regulated Power Supply
The Cyrus PSX-R2 is a purpose-built, regulated external power supply designed to lift the performance of compatible Cyrus audio components. Engineered in England, it supplies clean, stable DC power through a dedicated 5-pin PSX-R umbilical, reducing mains-borne noise and improving dynamic headroom, resolution, and overall sonic refinement. The PSX-R2’s design focuses on low noise, high ripple rejection and tight load regulation to deliver consistent performance for demanding hi-fi applications.
Featuring a die-cast chassis and robust internal regulation, the PSX-R2 offers selectable high and low output levels to match different Cyrus models. Its intelligent circuitry adapts output voltage to the requirements of the connected component while two-stage regulation isolates sensitive audio electronics from mains disturbances. The supplied ferrite clamp and carefully routed power cable help to minimize interference, while an accessible rear mains switch and fuse allow safe operation and serviceability by authorized technicians.
Installation is straightforward: connect the IEC mains lead to the rear inlet, fit the ferrite clamp on the cable as instructed, and plug the 5-pin umbilical into the partner Cyrus unit. For some older Cyrus amplifiers, dealer-installed modifications may be required to accept the PSX-R2. Once connected, the PSX-R2 and the Cyrus component coordinate standby operation; the front-panel indicators show unified power status for simple use.
Safety and reliability are central to the design. The manual emphasizes ventilation, correct mains voltage matching, avoiding moisture and heat, and using authorized service centres for repairs. The unit meets EMC and FCC Class B limits and includes protections such as electronic overload safeguards and service guidance for fuse replacement and qualified servicing.
Compact yet substantial, the PSX-R2’s measured specifications include excellent ripple rejection (>67 dB), extremely low output noise (<40 μV at rated conditions), and tight load regulation (0.2% under specified loads). A two-year warranty covers the original purchaser, with exclusions for misuse, unauthorized repairs, and transit damage.
Notes
- Ensure mains voltage on the rear label matches your local supply before connecting.
- Fit the ferrite clamp close to the mains plug for best interference suppression.
- Modifications for legacy Cyrus models must be performed by an authorized dealer.
- Keep the mains plug accessible to disconnect power quickly if needed.
Search for 67,706 Manuals online
Type-in Brand or Model