Manual.ly Logo

Crunch GTi800A Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: gpt-5.6-terra
page

/ 12

Loading...
e6e30beabe8c6ec9660b804cd284d2c17634 page 8
ENG
8
SAFETY INSTRUCTIONS
THE PURCHASED DEVICE IS ONLY SUITABLE FOR AN
OPERATION WITH A 12V ON-BOARD ELECTRICAL SYS-
TEM OF A VEHICLE. Otherwise re hazard, risk of injury
and electric shock consists.
PLEASE DO NOT MAKE ANY OPERATION OF THE
SOUND SYSTEM, WHICH DISTRACT YOU FROM A SAFE
DRIVING. Do not make any procedures, which demand a
longer attention. Perform these operations not until you have
stopped the vehicle on a safe place. Otherwise the risk of
accident consists.
ADJUST THE SOUND VOLUME TO AN APPROPRIATE
LEVEL, THAT YOU ARE STILL ABLE TO HEAR EXTE-
RIOR NOISES WHILE DRIVING. High performance sound
systems in vehicles may generate the acoustic pressure of a
live concert. The permanent listening to extreme loud music
may cause the loss of your hearing abilities. The hearing of
extreme loud music while driving may derogate your cogni-
tion of warning signals in the trafc. In the interests of the
common safeness, we suggest to drive with a lower sound
volume. Otherwise the risk of accident consists.
DO NOT COVER COOLING VENTS AND HEAT SINKS.
Otherwise this may cause heat accumulation in the device
and re hazard consists.
DO NOT OPEN THE DEVICE. Otherwise re hazard, risk of
injury and electric shock consists. Also this may cause a loss
of the warranty.
REPLACE FUSES ONLY WITH FUSE WITH THE SAME
RATING. Otherwise re hazard and risk of electric shock
consists.
DO NOT USE THE DEVICE ANY LONGER, IF A MAL-
FUNCTION, WHICH REMAINS UNREMEDIED. Refer in
this case to the chapter TROUBLE SHOOTING. Otherwise
risk of injury and the damage of the device consists. Commit
the device to an authorized retailer.
INTERCONNECTION AND INSTALLATION SHOULD BE
ACCOMPLISHED BY SKILLED STAFF ONLY. The inter-
connection and installation of this device demands technical
aptitude and experience. For your own safeness, commit
the interconnection and installation to your car audio retailer,
where you have purchased the device.
DISCONNECT THE GROUND CONNECTION FROM THE
VEHICLE’S BATTERY BEFORE INSTALLATION. Before
you start with the installation of the sound system, discon-
nect by any means the ground supply wire from the battery,
to avoid any risk of electric shock and short circuits.
CHOOSE AN APPROPRIATE LOCATION FOR THE IN-
STALLATION OF THE DEVICE. Look for an appropriate
location for the device, which ensures a sufcient air circu-
lation. The best places are spare wheel cavities, and open
spaces in the trunk area. Less suitable are storage spaces
behind the side coverings or under the car seats.
DO NOT INSTALL THE DEVICE AT LOCATIONS, WHERE
IT WILL BE EXPOSED TO HIGH HUMIDITY AND DUST.
Install the device at a location, where it will be protected from
high humidity and dust. If humidity and dust attain inside the
device, malfunctions may be caused.
MOUNT THE DEVICE AND OTHER COMPONENTS OF
THE SOUND SYSTEM SUFFICIENTLY. Otherwise the de-
vice and components may get loose and act as dangerous
objects, which could cause serious harm and damages in
the passenger room.
ENSURE NOT TO DAMAGE COMPONENTS, WIRES
AND CABLES OF THE VEHICLE WHEN YOU DRILL THE
MOUNTING HOLES. If you drill the mounting holes for the
installation into the vehicle’s chassis, ensure by any means,
not to damage, block or tangent the fuel pipe, the gas tank,
other wires or electrical cables.
ENSURE CORRECT CONNECTION OF ALL TERMINALS.
Faulty connections may could cause re hazard and lead to
damages of the device.
DO NOT INSTALL AUDIO CABLES AND POWER SUPPLY
WIRES TOGETHER. Ensure while installation not to lead
the audio cables between the head unit and the amplier
together with the power supply wires on the same side of the
vehicle. The best is a areal separated installation in the left
and right cable channel of the vehicle. Therewith a overlap of
interferences on the audio signal will be avoided. This stands
also for the equipped bass-remote wire, which should be in-
stalled not together with the power supply wires, but rather
with the audio signal cables.
ENSURE THAT CABLES MAY NOT CAUGHT UP IN
CLOSE-BY OBJECTS. Install all the wires and cables like
described on the following pages, therewith these may not
hinder the driver. Cables and wires which are installed close-
by the steering wheel, gear lever or the brake pedal, may
caught up and cause highly dangerous situations.
DO NOT SPLICE ELECTRICAL WIRES. The electrical
wires should not be bared, to provide power supply to other
devices. Otherwise the load capacity of the wire may get
overloaded. Use therefor a appropriate distribution block.
Otherwise re hazard and risk of electric shock consists.
DO NOT USE BOLTS AND SCREW NUTS OF THE BRAKE
SYSTEM AS GROUND POINT. Never use for the installa-
tion or the ground point bolts and screw-nuts of the brake
system, steering system or other security-relevant compo-
nents. Otherwise re hazard consists or the driving safety
will be derogated.
ENSURE NOT TO BEND OR SQUEEZE CABLES AND
WIRES BY SHARP OBJECTS. Do not install cables and
wires not close-by movable objects like the seat rail or may
be bended or harmed by sharp and barbed edges. If you
lead a wire or cable through the hole in a metal sheet, pro-
tect the insulation with a rubber grommet.
KEEP AWAY SMALL PARTS AND JACKS FROM CHIL-
DREN. If objects like these will be swallowed, the risk of se-
rious injuries consists. Consult promptly a medical doctor, if
a child swallowed a small object.

Chat with your Crunch GTi800A manual using AI

Get instant AI answers from your Crunch GTi800A manual

Ask anything about the Crunch GTi800A. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend GTi800A?

Yes No

Frequently Asked Questions

A

It is an active bass reflex subwoofer system for vehicles. It combines a 20 cm (8-inch) subwoofer enclosure with an integrated amplifier, so a separate amplifier for the subwoofer is not required.

Is this answer helpful?

A

The stated output is 200 W RMS and 400 W maximum. Actual performance depends on correct wiring, vehicle electrical condition, input signal quality, enclosure placement, and control settings.

Is this answer helpful?

A

Yes. The high-level input can connect to speaker-level outputs from a head unit that has no RCA pre-outs. This input also supports automatic turn-on functionality.

Is this answer helpful?

A

No. Use either the RCA low-level input or the high-level input, not both. Connecting both input types simultaneously can seriously damage the sound system.

Is this answer helpful?

A

The low-pass filter sets the highest frequencies sent to the subwoofer. It is adjustable from 30 Hz to 250 Hz, helping remove mids and highs while blending bass with the main speakers.

Is this answer helpful?

A

The Protect LED indicates a fault condition. Possible causes include overheating from poor airflow or high output use, incorrect voltage, loose connections, grounding problems, or an internal issue. Turn the system off, let it cool, and inspect the installation.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Integrated 200 W RMS amplifier and 8-inch bass reflex subwoofer simplify bass system upgrades.
  • Adjustable 30-250 Hz low-pass filter helps match bass output to existing speakers.
  • RCA and high-level inputs support aftermarket radios and many factory head units.
  • High-level input offers automatic turn-on when no remote output is available.
VS

Disadvantages

  • High-level and RCA inputs must never be connected at the same time.
  • Bass boost can cause distortion or excessive strain if used aggressively.
  • Installation requires correctly sized wiring, battery-side fusing, and a solid chassis ground.
  • The system is intended only for 12 V negative-ground vehicle electrical systems.
M: gpt-5.6-terra

Product Specification

Type

Enclosed subwoofer

Amplification

Active

Woofer

8 in / 203.2 mm

Power

200 W RMS, 400 W peak

M: gpt-5.6-terra

Product Description

Crunch GTi800A - Read, Download & Print Free

The Crunch GTi800A is an active bass reflex subwoofer system designed to bring stronger low-frequency impact to a 12 V vehicle audio setup. Combining an integrated amplifier with a 20 cm (8-inch) subwoofer enclosure, it offers a compact route to deeper bass without requiring a separate external amplifier. Its stated output is 200 W RMS and up to 400 W maximum, making it suitable for drivers who want more weight, rhythm, and presence from their music.

Adjustable Bass for Different Music Styles

A continuously adjustable low-pass filter lets users set the upper bass cutoff from 30 Hz to 250 Hz. This helps the GTi800A blend with existing door speakers by reducing unwanted midrange and high-frequency output from the subwoofer. The output level control also supports level matching with the head unit, allowing the bass response to be balanced instead of overpowering the rest of the system.

For added low-end emphasis, the Bass Boost control provides adjustment from 0 dB to 12 dB at 55 Hz. This can add extra punch to suitable recordings, although moderate settings are recommended to preserve clean sound and avoid excessive strain. The unit includes both RCA low-level inputs and a high-level input for connection to factory or aftermarket radios.

Installation and Connection Options

The high-level input is especially useful for head units without RCA pre-outs. It also enables automatic turn-on, so the subwoofer system can switch on and off with the radio when a separate remote lead is unavailable. RCA and high-level inputs must not be used at the same time.

The GTi800A operates from a negative-ground 12 V electrical system and accepts 9 V to 15 V operating voltage. A 15 A fuse is fitted for protection. Correct installation is essential: use power and ground cables of at least 10 mm2, install an additional fuse near the battery, and secure the enclosure in a well-ventilated area. Open trunk spaces and spare-wheel wells are preferred locations, while cramped, damp, or dusty areas should be avoided.

Practical Controls and Protection

Power and Protect LEDs provide quick operating-status feedback. If the protection indicator lights, users should check ventilation, supply voltage, grounding, and cable connections. Separating audio cables from power wiring can also reduce interference and alternator noise.

Notes

  • Disconnect the battery ground before installation.
  • Keep listening levels safe enough to hear traffic and warning sounds.
  • Use qualified installation support if vehicle wiring experience is limited.
  • Never replace the 15 A fuse with a higher-rated fuse.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly