Manual.ly Logo

Crunch GroundPounder GP690 Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 16

Loading...
c4bf6e92a2c4bf5c68414eca2610311b283a page 9
9
SAFETY INSTRUCTIONS
THE PURCHASED DEVICE IS ONLY SUITABLE FOR AN OPER-ATION
WITH A 12V ON-BOARD ELECTRICAL SYSTEM OF A VEHICLE. Other-
wise re hazard, risk of injury and electric shock consists.
PLEASE DO NOT MAKE ANY OPERATION OF THE SOUNDSYSTEM,
WHICH DISTRACT YOU FROM A SAFE DRIVING. Do not make any pro-
cedures, which demand a longer attention. Perform these operations not
until you have stopped the vehicle on a safe place. Otherwise the risk of
accident consists.
ADJUST THE SOUND VOLUME TO AN APPROPRIATE LEVEL, THAT
YOU ARE STILL ABLE TO HEAR EXTERIOR NOISES WHILE DRIVING.
High performance sound systems in vehicles may generate the acoustic
pressure of a live concert. The permanent listening to extrem loud music
may cause the loss of your hearing abilities. The hearing of extreme loud
music while driving may derogate your cognition of warning signals in the
trafc. In the interests of the common safeness, we suggest to drive with a
lower sound volume. Otherwise the risk of accident consists.
DO NOT COVER COOLING VENTS AND HEATSINKS. Otherwise this
may cause heat accumulation in the device and re hazard consists.
DO NOT OPEN THE DEVICE. Otherwise re hazard, risk of injury and
electric shock consists. Also this may cause a loss of the warranty.
REPLACE FUSES ONLY WITH FUSE WITH THE SAME RATING. Other-
wise re hazard and risk of electric shock consists.
DO NOT USE THE DEVICE ANY LONGER, IF A MALFUNCTION, WHICH
REMAINS UNREMEDIED. Refer in this case to the chapter TROUBLE
SHOOTING. Otherwise risk of injury and the damage of the device con-
sists. Commit the device to an authorized retailer.
THE INSTALLATION OF A POWER CAPACITOR WITH SUFFICIENT
CAPACITY IS RECOMMENDED. High performance sound systems cause
high potential voltage drops and need a high power consumption at a high
volume level. To relieve the vehicle’s on-board system, it is recommended
to install a power capacitor between the battery and the device which works
as buffer. Consult your car audio retailer for the appropriate capacity.
INTERCONNECTION AND INSTALLATION SHOULD BE ACCOM-
PLISHED BY SKILLED STAFF ONLY. The interconnection and installation
of this device demands technical aptitude and experience. For your own
safness, commit the interconnexion and installation to your car audio re-
tailer, where you have purchased the device.
DISCONNECT THE GROUND CONNECTION FROM THE VEHICLE’S
BATTERY BEFORE INSTALLATION. Before you start with the installation
of the sound system, disconnect by any means the ground supply wire from
the battery, to avoid any risk of electric shock and short circuits.
CHOOSE AN APPROPRIATE LOCATION FOR THE INSTALLATION OF
THE DEVICE. Look for an appropriate location for the device, which en-
sures a sufcient air circulation. The best places are spare wheel cavities,
and open spaces in the trunk area. Less suitable are storage spaces behind
the side coverings or under the car seats.
DO NOT INSTALL THE DEVICE AT LOCATIONS, WHERE IT WILL BE
EXPOSED TO HIGH HUMIDITY AND DUST. Install the device at a loca-
tion, where it will be protected from high humidity and dust. If humidity and
dust attain inside the device, malfunctions may be caused.
MOUNT THE DEVICE AND OTHER COMPONENTS OF THE SOUND
SYSTEM SUFFICIENTLY. Otherwise the device and components may get
loose and act as dangerous objects, which could cause serious harm and
damages in the passenger room.
ENSURE NOT TO DAMAGE COMPONENTS, WIRES AND CABLES OF
THE VEHICLE WHEN YOU DRILL THE MOUNTING HOLES. If you drill
the mounting holes for the installation into the vehicle’s chasis, ensure by
any means, not to damage, block or tangent the fuel pipe, the gas tank,
other wires or electrical cables.
ENSURE CORRECT CONNECTION OF ALL TERMINALS. Faulty con-
nections may could cause re hazard and lead to damages of the device.
DO NOT INSTALL AUDIO CABLES AND POWER SUPPLY WIRES TO-
GETHER. Ensure while installation not to lead the audio cables between
the head unit and the sound system together with the power supply wires
on the same side of the vehicle. The best is a areal separated installation
in the left and right cable channel of the vehicle. Therewith a overlap of
interferences on the audio signal will be avoided. This stands also for the
equipped bass-remote wire, which should be installed not together with the
power supply wires, but rather with the audio signal cables.
ENSURE THAT CABLES MAY NOT CAUGHT UP IN CLOSE-BY OB-
JECTS. Install all the wires and cables like described on the following pag-
es, therewith these may not hinder the driver. Cables and wires which are
installed close-by the steering wheel, gear lever or the brake pedal, may
caught up and cause highly dangerous situations.
DO NOT SPLICE ELECTRICAL WIRES. The electrical wires should not be
bared, to provide power supply to other devices.Otherwise the load capac-
ity of the wire may get overloaded. Use therefor a appropriate distribution
block. Otherwise re hazard and risk of electric shock consists.
DO NOT USE BOLTS AND SCREW NUTS OF THE BRAKE SYSTEM
AS GROUND POINT. Never use for the installation or the ground point
bolts and screw-nuts of the brake system, steering system or other security-
relevant components. Otherwise re hazard consists or the driving safety
will be derogated.
ENSURE NOT TO BEND OR SQUEEZE CABLES AND WIRES BY
SHARP OBJECTS. Do not install cables and wires not close-by movable
objects like the seat rail or may be bended or harmed by sharp and barbed
edges. If you lead a wire or cable through the hole in a metal sheet, protect
the insulation with a rubber grommet.
KEEP AWAY SMALL PARTS AND JACKS FROM CHILDREN. If objects
like these will be swallowed, the risk of serious injuries consists. Consult
promtly a medical doctor, if a child swallowed a small object.
PLEASE NOTE THE FOLLOWING ADVICES BEFORE THE FIRST OPERATION!

Chat with your Crunch GroundPounder GP690 manual using AI

Get instant AI answers from your Crunch GroundPounder GP690 manual

Ask anything about the Crunch GroundPounder GP690. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend GroundPounder GP690?

Yes No

Frequently Asked Questions

A

The system has an RMS output of 150 watts and a maximum peak output of 300 watts suitable for car audio.

Is this answer helpful?

A

It is designed for spare tire wells with at least 50 cm diameter and 15 cm height, ensuring cool air circulation.

Is this answer helpful?

A

Yes, the unit supports high-level speaker inputs in addition to standard RCA pre-amplifier inputs for various head units.

Is this answer helpful?

A

Connect the bass remote controller to the dedicated jack to change bass levels like boost and volume from the driver seat.

Is this answer helpful?

A

Use the included 10 ampere fuse. Never replace it with a value higher than 10 A to prevent fire hazards.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • High peak power output of 300 watts handles dynamic tracks
  • Variable low pass filter adjusts from 50 Hz to 150 Hz easily
  • Includes bass remote controller for driver seat adjustment
  • Compact size fits many spare tire well cavities
  • Multiple input options support RCA and speaker level connections
VS

Disadvantages

  • Requires precise mounting to prevent becoming loose projectiles
  • Strict safety protocols must be followed during installation
  • Power capacitor installation is recommended for heavy loads
  • Opening the unit voids the warranty immediately
  • Grounding sensitivity may cause interference if not careful
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Subwoofer with enclosure

Amplification

Active

Tweeter

No

Midwoofer

No

Woofer

1x 6"x9"

Power

150W RMS, 300W Peak

M: qwen/qwen3.5-flash-20260224

Product Description

Enhance Your Drive with the Crunch GroundPounder GP690

Adding powerful bass to your vehicle audio system requires the right equipment to ensure clarity and depth. The Crunch GroundPounder GP690 stands out as a robust active subwoofer system designed for seamless car integration. When consulting the Crunch GroundPounder GP690 Manual, users find detailed guidance on unlocking the full potential of this unit for their specific vehicle type. This device fits ideally into spare tire wells, requiring a minimum depth of 15 cm and a diameter of 50 cm to accommodate the mechanical design.

Performance is key for any dedicated audio enthusiast seeking realism on the road. This subwoofer delivers a consistent RMS output of 150 watts and a maximum peak of 300 watts for dynamic music tracks. The frequency range spans from 25 Hz to 150 Hz, ensuring deep lows without overwhelming the mid-range drivers in standard car stereos. To fine-tune the sound to your preference, the unit includes a variable low pass filter adjustable between 50 Hz and 150 Hz. Enthusiasts also appreciate the integrated bass boost feature, which allows customization of low frequencies up to positive 12 dB at 45 Hz.

Installation is straightforward but demands strict adherence to safety protocols. Always disconnect the battery ground before starting any work to avoid short circuits. Proper mounting is critical to prevent the unit from becoming a projectile during sudden stops or accidents. Ventilation must be clear to avoid overheating within the trunk space. The system supports multiple input options, including RCA pre-amplifier inputs or high-level speaker inputs for older head units. An automatic turn-on feature simplifies wiring by linking to the head unit remote signal for seamless power management.

Connectivity options include a provision for a dedicated bass remote controller. This allows drivers to adjust bass levels from the driver seat without taking eyes off the road. Phase shifting is available to correct acoustic issues within the vehicle cabin, switching between 0 and 180 degrees. Troubleshooting guides address common issues like power failures or distorted audio to help owners resolve problems quickly. Ensuring correct wiring prevents fuse blows and protects the vehicle electrical system from damage.

Installation Notes

Mount in a cool, dry area away from fuel lines. Use a power capacitor if needed for heavy bass demands. Keep audio and power cables separate to reduce noise interference. Do not cover cooling vents.

Final Thoughts

Integrating this system improves the driving experience significantly. The build quality supports long-term reliability when installed correctly. Following the manufacturer recommendations ensures safety and optimal sound reproduction. Enjoy the drive with improved audio fidelity and a cleaner trunk space.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly