Manual.ly Logo

Colbor CL60M Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
365676698b4c09afca83863200ce8bc2df75 page 1
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
CL60M
Video Light User Manual
Safety Instructions
Please read and fully understand this manual before using the product.
Please remove the COB protective lm to avoid damage by overheat before
rst use.
Please remove the COB protective cover to avoid damage by overheat
before every use.
Do not use the product under moist environment or with wet hands. Do not
allow the product to be splashed or soaked in water.
Keep the product away from corrosive chemicals and liquid to avoid
damage.
Keep the product out of children’s reach during use. Do not leave the
product unattended.
When the product is working, the COB and heat sink will produce high
temperature. Do not block, turn upside down and touch with hands.
To ensure the service life, the cooling system still runs for a while after
shutdown until the COB is below 45℃ .
Please disconnect the power supply and put away the power cord when it is
not in use.
During use, arrange the power cord in order to avoid tripping and cutting o
the power or damaging the product.
Let the product cool completely before storage. Remove the power cable
from the product and put it in the corresponding position of carrying bag
after cooling down.
Do not disassemble the product by yourself, otherwise the warranty will be
invalid. If any fault occurs, please refer it to an authorized technician for
inspection or maintenance.
Recommend to use the original parts of COLBOR. If the product is damaged
due to the use of the non-original parts, it is not included in the warranty of
our products.
Drop or external impact may cause product failure. Articial damage is not
covered by warranty.
COLBOR reserves the right of nal interpretation of the products. The
product design and specications are subject to change without notice.
Product Instructions
① COB Bead
② Bead Heat Sink
③ Bowen Mount Adapter
④ Ejector Pin
⑤ Rail
⑥ Vent
⑦ Quick-mount Holder
⑧ LCD Display Screen
⑨ Brightness Control
Wheel
⑩ Color Temperature
Control Wheel
⑪ Settings Button
⑫ EFF Rate Option
Button
⑬ EFF Mode Button
⑭ CCT Mode Button
⑮ Type-C Power
Input
⑯ Power Button
Installation & Disassembly
Hold the COB protective cover and pull it out as the
arrow shows.
Note: Make sure remove the cover before every use
to avoid heat damage.
① Align the inner frame of adapter ring with the outer frame of light, and
push the adapter ring into the light from the head. Fasten two marbles on the
adapter ring to the chute.
When disassembling, push the adapter ring towards the head of the light.
① Slide the quick-mount holder into the chute under the light and rotate the
knob a tightly.
② Install tripod into the quick-mount holder and rotate the knob b tightly.
③ Adjust the light to the desired angle and rotate the knob c tightly.
Slide the rail of one light into the chute of the other until the pins inlay.
When disconnecting, slide the light out of the chute.
Slide VM2 into the chute of light, determine the xed position and adjust the
lever to lock.
When removing, adjust the level to unlock and slide out of the light.
(1) DC power supply
Connect power adapter with Type-C power input and turn on.
(2) Battery power supply
Turn on power after installing V-mount and battery.
Operation Instructions
1. Remove COB protective cover
2. Install adapter ring and reector
3. Fixing of the video light
4. Multi-light connection & disassembly
5. Install VM2
6. Power supply
1. Before using the product for the rst time, please be sure to tear o the
protective lm in front of the COB bead.
2. Power On: connect the power cord with the power adapter, plug the
connector of adapter into the xture’s power input, then attach to an
electricity supply.
3. Function: long press the power button, then the power button lights up. The
product enters operation interface.
(Factory default mode: CCT)
4. Power O: press the power button.
After selecting wireless connection in Settings menu, the
icon will be displayed dynamically.
The icon is always on to indicate successful pairing with
mobile APP.
The icon disappears to indicate mobile APP pairing
failure, or the product is unpaired.
Smart Mode. The product will adjust the fan speed
according to the internal detected temperature to ensure
that it is in optimal working condition.
Status Icon Description
① APP Connection Status Icon
② Fan Status Icon
Quiet Mode. The fan keeps running at low speed for
minimum noise, and overheating protection will be
activated if the product temperature is higher than the
alarm value.
None grouping status. The product defaults to the factory
status, and will not be aected by other groups.
If the icon is always on, it means that Repeater function
is turned on, and if the icon disappears, it means the
function is turned o.
If the icon ashes, it means that the internal temperature
of the product is too high, and cooling measures need
to be taken. If the icon disappears, it means that the
operation is normal.
③ Group Status Icon
④ Repeater Status Icon
⑤ Product Overheated Alarm Icon
A stands for Group A. There are fteen groups (A~O). T
stands for Tx.
A stands for Group A. There are fteen groups (A~O). R
stands for Rx.
A stands for Group A. There are fteen groups (A~O). TR
stands for TxRx.
Brightness
Color
Temperature
Roll the wheel upwards
or downwards to adjust
brightness (DIM) within
0%~100%
Press down the wheel to
quickly switch the preset
brightness, 0%, 25%, 50%,
75%, and 100%
CCT Mode (Short press CCT Mode Button to enter)
Brightness Control Wheel
Rolling the wheel will enlarge the current setting parameter value, and
it will automatically return to the main screen after 1.5 seconds of no
operation.
Brightness
Rate
Special
Eect
Color
Temperature
Roll the wheel upwards
or downwards to adjust
brightness (DIM) within
0%~100%
Press down the wheel to
quickly switch the preset
brightness, 0%, 25%, 50%,
75%, and 100%
Press the button to switch
special eect: Fire → CCT
Chase → Pulsing → TV →
Explosion → Faulty Bulb
→ Welding → Strobe →
Lightning → SOS
EFF Mode (Short press EFF Mode Button to enter)
Brightness Control Wheel
EFF Mode Button
Press the button to switch eect
rate from Lv.1 to Lv.5. Max rate:
Lv.5
EFF Rate Option Button
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: LOCK
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
Fire
CCT Chase
Faulty Bulb
Welding
EFF
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
Pulsing Strobe
② Align the reector with the adapter ring and insert it. The ejector pin is
pinched by reector. Rotate the reector tightly clockwise and the ejector pin
springs back.
When disassembling, push the ejector pin and rotate the reector
anticlockwise.

Chat with your Colbor CL60M manual using AI

Get instant AI answers from your Colbor CL60M manual

Ask anything about the Colbor CL60M. Answers come from this manual, with the pages they are based on.

CL60M Maintenance Schedule

Before every use
Remove the COB protective cover

Remove the COB protective cover before every use to prevent overheating damage.

After each use
Disconnect and store the power cord

Disconnect the power supply when not in use. After the light cools, remove its power cable and place it in the carrying bag.

Before each storage
Let the light cool before storage

Allow the product to cool completely before storing it.

M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend CL60M?

Yes No

Video Manual

IS IT FOR YOU? | FULL REVIEW OF COLBOR W60

Frequently Asked Questions

A

The CL60M supports Type-C PD input at 20V/4A for mains power and V-mount battery operation for portable use. Using the original COLBOR adapter is recommended to ensure proper function and maintain warranty coverage.

Is this answer helpful?

A

Yes. Remove the COB protective film and cover before every use. Leaving the protective layer on can cause overheating and permanent damage to the COB emitter.

Is this answer helpful?

A

Use the Brightness Control Wheel to dim from 0–100% and press it for quick presets (0/25/50/75/100%). The Color Temperature Wheel adjusts CCT and can access product info. Dedicated buttons toggle EFF/CCT modes and set effect rates (Lv.1–Lv.5).

Is this answer helpful?

A

Yes. The CL60M supports grouping (A–O), TX/RX/TXRX modes and a repeater function to extend control range. Effective transmitter/receiver range is about 10 meters; enable repeater units centrally for larger arrays to improve signal.

Is this answer helpful?

A

The light has a cooling system with SMART and QUIET fan modes, overheating alarm icons, and automatic post-shutdown cooling until the COB is below safe temperatures. Avoid moisture, do not touch hot components, and do not block vents.

Is this answer helpful?

A

Typical packaging includes the CL60M light, Bowens mount adapter, reflector, COB protective cover, power adapter, light base, carrying bag, and user manual. Accessories may vary by retailer—check contents on purchase.

Is this answer helpful?

A

COLBOR provides a 12-month limited warranty from the purchase date and a 30-day free replacement or repair for quality defects on receipt. Warranty excludes misuse, water damage, unauthorized modifications, consumables, and force majeure.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • High color accuracy (CRI 97+) and adjustable CCT for reliable, natural-looking light.
  • Dual power options: Type-C PD 20V/4A and V-mount battery for studio or location use.
  • Compact lightweight construction (550g) with Bowens mount compatibility for modifiers.
  • Intuitive controls: dual wheels, preset brightness, numerous special effects, and LCD feedback.
  • Wireless app control, grouping, and repeater support for multi-light setups.
VS

Disadvantages

  • Requires removing COB protective cover before every use — risk if forgotten.
  • Fan noise may be audible in SMART mode; QUIET mode risks thermal shutoff at high temps.
  • Repeater function can add latency and needs careful setup in large arrays.
  • Warranty void if non-original parts used or if unit is disassembled by user.
  • Limited waterproofing; avoid moisture and wet conditions for safety and longevity.
M: OA-GPT-5-NAN

Product Specification

Light Output

3243 Lux (1m), 22540 Lux (1m with Reflector)

Color Temperature

5600K

Power

65W

Socket

no

Special Features

LED, Umbrella Holder

Dimensions

3.15x5.51x3.54in (WxHxD)

Weight

1.21lb

M: OA-GPT-54-NAN

Product Description

Colbor CL60M Manual — Compact, Powerful Video Light

The Colbor CL60M is a portable COB video light engineered for creators who need reliable, high-output illumination in a compact package. With a 60W COB output (80W max), a wide 120° beam, and high color fidelity (CRI 97+), the CL60M balances power and portability for photography, video, streaming, and run-and-gun production.

Designed with a Bowens mount adapter and a detachable reflector, the CL60M adapts to modifiers for focused or diffused lighting. It supports both Type-C PD input (20V/4A) and V-mount battery operation, making it suitable for studio setups and location shoots. The housing blends aluminum alloy and ABS for a lightweight yet durable build, while the integrated cooling system runs in smart or quiet modes to manage heat and preserve LED life.

Control is intuitive: two rotary wheels adjust brightness and color temperature (CCT) across a broad range, with quick-press presets for 0/25/50/75/100% brightness, and dedicated buttons for special effects (fire, strobe, lightning, TV flicker, etc.) and effect rate (Lv.1–Lv.5). A clear LCD shows settings and status icons for fan, app connection, grouping, repeater mode, and overheating alarm. Wireless control via the COLBOR Studio app extends range and convenience for multi-light setups.

Multi-light grouping supports up to 15 groups (A–O) and TX/RX/TXRX modes; a repeater function can extend effective control distance in larger arrays. The manual suggests using repeater-enabled units strategically when chaining more than five or ten lights to maintain responsiveness. The CL60M also includes safety-focused features: a removable COB protective cover (must be removed before use), warnings about operating temperatures, and automatic cooling after shutdown until the COB is safe.

Included accessories typically cover a Bowens adapter, reflector, COB protective cover, power adapter, light base, carrying bag, and user manual. The product carries a 12-month limited warranty with 30-day replacement for defects on receipt, subject to exclusions for misuse, water damage, unauthorized modification, or consumables.

Notes:

  • Always remove the protective COB film/cover before powering the unit to avoid overheating.
  • Use the original power adapter or authorized batteries to preserve warranty.
  • Let the cooling fan run post-shutdown until the COB temperature drops below safety thresholds.

Experience: the CL60M is a versatile, user-friendly light for creators who need strong output, accurate color, and flexible power options in a compact form factor.

M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly