Clage DCX Next Manual
PDF manual · 203 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Clage DCX Next manual using AI
Get instant AI answers from your Clage DCX Next manual
Ask anything about the Clage DCX Next. Answers come from this manual, with the pages they are based on.
DCX Next Maintenance Schedule
Have an authorised professional inspect electrical and plumbing components to ensure proper function and operational safety.
Unscrew and clean outlet fittings such as jet regulators and shower heads regularly to maintain good water supply.
Free maintenance reminders
Timed to your purchase date. Always free, unsubscribe anytime.
Ask a Question
Do you recommend DCX Next?
Yes NoFrequently Asked Questions
It is an electronically controlled instant water heater for supplying hot water to one or more tap outlets. It heats water as it flows through the unit, automatically starting when a hot-water tap opens and stopping when the tap closes.
Is this answer helpful?
The central sensor key cycles through five preset outlet temperatures: 35 C, 38 C, 42 C, 48 C, and 55 C. Colored LEDs indicate the active selection. These settings are intended for common uses such as hand washing, showering, bathing, kitchen work, and cleaning.
Is this answer helpful?
A flashing temperature LED can indicate that the heater has reached its power limit. This can occur when incoming water is cold or the flow rate is too high. Reducing the hot-water flow at the tap can allow the unit to reach the selected temperature.
Is this answer helpful?
The DCX 13 Next can be configured for 11 or 13.5 kW. The DCX Next can be configured for 18, 21, 24, or 27 kW at 400 V. An authorized professional must set the maximum power according to the electrical installation.
Is this answer helpful?
Yes. It must be vented before first operation and after the appliance has been drained, such as following plumbing work, repairs, or frost protection measures. Disconnect power, flush the water lines, remove air through the hot-water tap, then restore power.
Is this answer helpful?
Wipe plastic surfaces and fittings with a damp cloth only. Clean aerators and shower heads regularly to protect water flow. The filter strainer may need cleaning or replacement if flow weakens. Electrical and plumbing components should be inspected by an authorized professional every three years.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Electronically controlled heating helps maintain a selected temperature despite changing inlet conditions and water pressure.
- Five preset temperatures from 35 C to 55 C provide quick choices for hand washing, showers, kitchen use, and cleaning.
- Automatic switch-on and switch-off delivers hot water on demand without a storage tank.
- Multiple Power System settings let authorized installers adapt output from 11 to 27 kW, depending on the model.
- LED status indicators show selected temperature, heating activity, flow status, output limitation, and detected faults.
Disadvantages
- Temperature may not reach the selected level when inlet water is cold and flow demand exceeds available heater output.
- Installation requires a permanent three-phase electrical connection and must be completed by an authorized specialist.
- The unit must be installed in a frost-free location and remain accessible for maintenance.
- Only five fixed temperature settings are available, rather than fully variable degree-by-degree selection.
- Filters, aerators, and shower heads need periodic cleaning to maintain strong hot-water flow.
Product Specification
Energy efficiency class
A (A+ to F)
Rated power
18-27 kW (400 V)
Rated current
26-39 A
Temperature control
95-131°F, 5 levels
Inlet temperature
max. 86°F
Flow rate
max. 2.11 gal/min
Design
closed (pressure-resistant)
Mounting type
wall-mounted
Connection
1/2 in
Special features
electronic control, bare-wire heating system, air detection system
Protection rating
IP25
Noise level
15 dB(A)
Dimensions
9.41 x 18.43 x 3.78 in (W x H x D)
Weight
9.26 lb
Product Description
Clage DCX Next Electric Tankless Water Heater - Read, Download & Print Free
The Clage DCX Next Electric Tankless Water Heater is a compact, electronically controlled solution for dependable hot water at one or more outlets. Designed for decentralized installation, it heats water only when a hot-water tap is opened and switches off automatically when the tap is closed. This on-demand approach avoids storing heated water in a tank and helps match energy use to everyday demand.
Precise temperature control for daily routines
A central sensor key lets users cycle through five practical temperature settings: 35 C for hand washing, 38 C for showering, 42 C for bathing, 48 C for kitchen tasks, and 55 C for cleaning. Five colored LEDs show the selected setting at a glance. The electronic control continuously considers inlet temperature and flow rate to maintain the chosen outlet temperature as accurately as possible, including during water-pressure fluctuations.
When incoming water is especially cold or demand is high, the heater may reach its available output limit. In this situation, the selected temperature LED flashes to indicate that reducing the flow at the tap can help achieve a hotter outlet temperature. This clear visual feedback supports more predictable use in changing seasonal conditions.
Flexible power and installation options
The DCX Next range includes the DCX 13 Next, adjustable between 11 and 13.5 kW, and the DCX Next, configurable between 18, 21, 24, and 27 kW at 400 V. This Multiple Power System allows an authorized installer to select an output suitable for the local electrical installation. Both models use a bare-wire IES heating system, have G 1/2 inch water connections, and are rated IP25.
The unit is intended for wall mounting in frost-free rooms and can support pressure-resistant or pressureless connections. Optional mounting accessories can help accommodate difficult pipe layouts, surface-mounted installations, or uneven wall conditions. Because the electrical connection and power setting require professional work, correct planning is essential before installation.
Everyday care and useful status information
For convenient monitoring, holding the sensor key activates an information mode. LED signals show whether water is flowing, heating is active, the power limit is reached, or an error has been detected. Regular care is straightforward: wipe exterior surfaces with a damp cloth and clean shower heads, aerators, and outlet fittings periodically. A professional inspection of electrical and plumbing components is recommended every three years.
Notes
- Vent the heater fully before first use and after draining, repairs, or plumbing work.
- Use only hot water at the tap when checking the selected outlet temperature.
- The product carries energy efficiency class A and is made with reusable materials and components.
Search for 67,706 Manuals online
Type-in Brand or Model