Manual.ly Logo

Clage CDX 11-U Manual

4.8 · 16 Ratings

PDF manual · 56 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 56

Loading...
76961463648085fd39fb08d1c6d610a24150 page a
10
EN
CDX 7-U / CDX 11-U BASITRONIC®
This instantaneous water heater features an automatic air bubble protection to pre-
vent it from inadvertently running dry. Nevertheless, the appliance must be vented
before using it for the first time. Each time the appliance is emptied (e.g. after work on
the plumbing system, if there is a risk of frost or following repair work), the appliance
must be re-vented before it is used again.
1. Disconnect the instantaneous water heater from the mains (e.g. via deactivating the
fuses).
2. Unscrew the jet regulator on the outlet fitting and open the cold water tap valve to
rinse out the water pipe and avoid contaminating the appliance or the jet regulator.
3. Open and close the hot water tap until no more air emerges from the pipe and all
air has been eliminated from the water heater.
4. Only then should you re-connect the power supply again (e.g. via activating the
fuses) to the instantaneous water heater and screw the jet regulator back in.
5. The appliance activates the heater after approx. 10seconds of continuous water
flow.
3. How to use
• Plastic surfaces and fittings should only be wiped with a damp cloth. Do not use
abrasive or chlorine-based cleaning agents or solvents.
• For a good water supply, the outlet fittings (special tap aerators and shower heads)
should be unscrewed and cleaned at regular intervals. Every three years, the electri-
cal and plumbing components should be inspected by an authorised professional in
order to ensure proper functioning and operational safety at all times.
Cleaning and maintenance
Venting after maintenance work

Chat with your Clage CDX 11-U manual using AI

Get instant AI answers from your Clage CDX 11-U manual

Ask anything about the Clage CDX 11-U. Answers come from this manual, with the pages they are based on.

CDX 11-U Maintenance Schedule

Remind me when maintenance is due
Every 3 years
Inspect electrical and plumbing components

Have an authorized professional inspect the electrical and water components every three years to ensure proper function and operational safety.

Show in the manual (page 10)
Regularly
Clean outlet fittings

Unscrew and clean tap aerators and shower heads regularly to ensure good water supply.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend CDX 11-U?

Yes No
0
User Pic

Stefan Koch

6 months ago

Does this water heater require specific electrical wiring like 3x16A, and is it critical to remove air bubbles before the first operation to prevent failure?

0
User Pic

Manual.ly

6 months ago

Yes, this unit requires a 3x16A connection with 1.5mm² cables. Air bubbles must be removed through proper bleeding before startup. All three phases must engage simultaneously for correct function. Professional installation is advised to verify these electrical requirements and ensure safe operation of the device.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224

Frequently Asked Questions

A

Yes, children older than three years can use it under adult supervision who understands safety hazards.

Is this answer helpful?

A

First reset fuses to restart electronics. If persistent, check pressure switch or contact service.

Is this answer helpful?

A

Yes, installation must be correct and technical state perfect. Only authorized specialists should modify connections.

Is this answer helpful?

A

No, factory setting is 50C. Adjustment between 30 to 60C requires a certified technician only.

Is this answer helpful?

A

Vent before first use and after drainage. Clean aerators regularly and inspect components every three years.

Is this answer helpful?

A

No, the appliance must never be exposed to frost temperatures or stored in freezing conditions.

Is this answer helpful?

A

No, replace with original cable only by an expert to avoid hazards and ensure compliance.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Microprocessor controls power for consistent temperature regulation regardless of pressure changes.
  • Automatic air bubble protection prevents dry running incidents effectively and safely.
  • High energy efficiency class A minimizes electricity usage for hot water tasks.
  • Factory set temperature of 50C ensures immediate safety without complex initial setup.
  • Built-in safety cut-outs protect against overpressure and overheating risks during operation.
VS

Disadvantages

  • Temperature adjustment requires an authorized specialist and cannot be changed by users manually.
  • Device cannot tolerate freezing conditions which limits use in unheated outdoor areas completely.
  • Repairs must be performed by certified professionals to maintain safety standards and warranty.
  • Performance depends heavily on sufficient water flow rates which may drop with scale buildup.
  • Initial setup requires venting process which can be tricky if air pockets remain trapped effectively.
M: qwen/qwen3.5-flash-20260224

Product Specification

Energy Efficiency Class

A (A+ to F)

Rated Power

11kW (400V)

Rated Current

16A

Temperature Control

86-140degF

Flow Rate

1.27 GPM

Type

sealed (pressure-tight)

Mounting Type

Under-sink

Features

Bare wire heating system

Dimensions

6.97x11.57x4.25in (WxHxD)

Weight

5.95lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Experience Hot Water with Clage Technology

Finding a reliable source of hot water is essential for any modern household. The Clage CDX 11-U Electric Instant Water Heater delivers consistent performance for decentralised hot water preparation. This advanced appliance ensures that you have warm water available at the tap whenever needed. It is designed for domestic use within closed rooms and fits seamlessly into existing plumbing systems. People often reference the Clage CDX 11-U Electric Instant Water Heater Manual for detailed specifications during setup phases.

Digital Control and Efficiency

The device features a microprocessor-controlled system that regulates heating power. This electronics unit adjusts consumption based on flow rate and inlet temperature. Consequently, the water temperature remains constant even when pressure fluctuates. Users will appreciate the energy efficiency class A rating associated with this unit. The factory set temperature sits at 50 degrees Celsius, ensuring safety and comfort. In scenarios with cold incoming water, reducing flow can help achieve the desired result. This adaptability makes it a robust choice for varied household needs. Additionally, the system adheres to strict EU regulations regarding energy and water heating standards.

Safety and Operation

Safety is a top priority with this equipment. The unit must be earthed to prevent electrical risks. It includes automatic protection mechanisms against dry running via air bubble detection. Children aged three and older can use it under supervision. However, modifications to the electrical or water pipes are strictly prohibited. Always disconnect power before attempting any inspection or cleaning to ensure safety compliance. Do not expose the unit to frost during operation or storage. The device is intended solely for heating potable water for domestic purposes. Adherence to general guidelines ensures safe operation over many years without incidents.

Maintenance and Troubleshooting

Regular maintenance ensures longevity and peak performance. Before the first use, you must vent the device to remove air pockets. This process prevents damage and ensures proper heating function. After any drainage work, venting is required again. Clean fittings and aerators regularly to maintain water flow. For comprehensive checks, an authorized professional should inspect components every three years. If problems arise, simple reset procedures may help. Turning the house fuses off and on can reset the electronics. For complex issues like persistent cold water or faulty sensors, contact customer service. Never attempt repairs yourself unless qualified. The product operates well as long as guidelines are followed, ensuring a hassle-free user experience.

Important Notes

Keep these instructions handy for future reference regarding product support. Always verify data on the type plate matches your electrical supply. Contact the designated service center if the connection cable is damaged. Replacement parts require official authorization to avoid hazards. Regular cleaning extends lifespan significantly.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly