Manual.ly Logo

Clage CDX 11-U Manual

4.8 · 16 Ratings

PDF manual · 56 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 56

Loading...
76961463648085fd39fb08d1c6d610a24150 page 8
8
EN
CDX 7-U / CDX 11-U BASITRONIC®
1. Safety instructions
Please read these instructions carefully before installing or using the appliance!
Keep the instructions handy with the appliance for future use!
Instruction manuals are intended for the specialist who is responsible for the installa-
tion of the appliance. Operation manuals are for the end user. The provided manuals
correspond to the technical specifications of the appliance.
• Do not use the appliance until it has been correctly installed and unless it is
in perfect working order.
• Do not remove the front cover under any circumstances before switching off
the mains electrical supply to the unit.
• Never make technical modifications, either to the appliance itself or the
electrical leads and water pipes.
• The appliance must be earthed at all times.
• Pay attention to the fact that water temperatures in excess of approx. 43 °C
are perceived as hot, especially by children, and may cause a feeling of
burning. Please note that the fittings and taps may be very hot when the
appliance has been in use for some time.
• The appliance is only suitable for domestic use and similar applications
inside closed rooms, and must only be used to heat incoming water from
the mains supply.
• The appliance must never be exposed to frost.
• The values stated on the rating plate must be observed.
• In case of malfunction, disconnect the fuses immediately. In case of leaks,
cut off the mains water supply instantly. Repairs must only be carried out by
the customer service department or an authorised professional.
• This appliance can be used by children aged 3years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or ins truction concern-
ing use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be performed by children without supervision.
The latest version of the instructions can be found online at:
www.clage.com/downloads

Chat with your Clage CDX 11-U manual using AI

Get instant AI answers from your Clage CDX 11-U manual

Ask anything about the Clage CDX 11-U. Answers come from this manual, with the pages they are based on.

CDX 11-U Maintenance Schedule

Remind me when maintenance is due
Every 3 years
Inspect electrical and plumbing components

Have an authorized professional inspect the electrical and water components every three years to ensure proper function and operational safety.

Show in the manual (page 10)
Regularly
Clean outlet fittings

Unscrew and clean tap aerators and shower heads regularly to ensure good water supply.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend CDX 11-U?

Yes No
0
User Pic

Stefan Koch

6 months ago

Does this water heater require specific electrical wiring like 3x16A, and is it critical to remove air bubbles before the first operation to prevent failure?

0
User Pic

Manual.ly

6 months ago

Yes, this unit requires a 3x16A connection with 1.5mm² cables. Air bubbles must be removed through proper bleeding before startup. All three phases must engage simultaneously for correct function. Professional installation is advised to verify these electrical requirements and ensure safe operation of the device.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224

Frequently Asked Questions

A

Yes, children older than three years can use it under adult supervision who understands safety hazards.

Is this answer helpful?

A

First reset fuses to restart electronics. If persistent, check pressure switch or contact service.

Is this answer helpful?

A

Yes, installation must be correct and technical state perfect. Only authorized specialists should modify connections.

Is this answer helpful?

A

No, factory setting is 50C. Adjustment between 30 to 60C requires a certified technician only.

Is this answer helpful?

A

Vent before first use and after drainage. Clean aerators regularly and inspect components every three years.

Is this answer helpful?

A

No, the appliance must never be exposed to frost temperatures or stored in freezing conditions.

Is this answer helpful?

A

No, replace with original cable only by an expert to avoid hazards and ensure compliance.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Microprocessor controls power for consistent temperature regulation regardless of pressure changes.
  • Automatic air bubble protection prevents dry running incidents effectively and safely.
  • High energy efficiency class A minimizes electricity usage for hot water tasks.
  • Factory set temperature of 50C ensures immediate safety without complex initial setup.
  • Built-in safety cut-outs protect against overpressure and overheating risks during operation.
VS

Disadvantages

  • Temperature adjustment requires an authorized specialist and cannot be changed by users manually.
  • Device cannot tolerate freezing conditions which limits use in unheated outdoor areas completely.
  • Repairs must be performed by certified professionals to maintain safety standards and warranty.
  • Performance depends heavily on sufficient water flow rates which may drop with scale buildup.
  • Initial setup requires venting process which can be tricky if air pockets remain trapped effectively.
M: qwen/qwen3.5-flash-20260224

Product Specification

Energy Efficiency Class

A (A+ to F)

Rated Power

11kW (400V)

Rated Current

16A

Temperature Control

86-140degF

Flow Rate

1.27 GPM

Type

sealed (pressure-tight)

Mounting Type

Under-sink

Features

Bare wire heating system

Dimensions

6.97x11.57x4.25in (WxHxD)

Weight

5.95lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Experience Hot Water with Clage Technology

Finding a reliable source of hot water is essential for any modern household. The Clage CDX 11-U Electric Instant Water Heater delivers consistent performance for decentralised hot water preparation. This advanced appliance ensures that you have warm water available at the tap whenever needed. It is designed for domestic use within closed rooms and fits seamlessly into existing plumbing systems. People often reference the Clage CDX 11-U Electric Instant Water Heater Manual for detailed specifications during setup phases.

Digital Control and Efficiency

The device features a microprocessor-controlled system that regulates heating power. This electronics unit adjusts consumption based on flow rate and inlet temperature. Consequently, the water temperature remains constant even when pressure fluctuates. Users will appreciate the energy efficiency class A rating associated with this unit. The factory set temperature sits at 50 degrees Celsius, ensuring safety and comfort. In scenarios with cold incoming water, reducing flow can help achieve the desired result. This adaptability makes it a robust choice for varied household needs. Additionally, the system adheres to strict EU regulations regarding energy and water heating standards.

Safety and Operation

Safety is a top priority with this equipment. The unit must be earthed to prevent electrical risks. It includes automatic protection mechanisms against dry running via air bubble detection. Children aged three and older can use it under supervision. However, modifications to the electrical or water pipes are strictly prohibited. Always disconnect power before attempting any inspection or cleaning to ensure safety compliance. Do not expose the unit to frost during operation or storage. The device is intended solely for heating potable water for domestic purposes. Adherence to general guidelines ensures safe operation over many years without incidents.

Maintenance and Troubleshooting

Regular maintenance ensures longevity and peak performance. Before the first use, you must vent the device to remove air pockets. This process prevents damage and ensures proper heating function. After any drainage work, venting is required again. Clean fittings and aerators regularly to maintain water flow. For comprehensive checks, an authorized professional should inspect components every three years. If problems arise, simple reset procedures may help. Turning the house fuses off and on can reset the electronics. For complex issues like persistent cold water or faulty sensors, contact customer service. Never attempt repairs yourself unless qualified. The product operates well as long as guidelines are followed, ensuring a hassle-free user experience.

Important Notes

Keep these instructions handy for future reference regarding product support. Always verify data on the type plate matches your electrical supply. Contact the designated service center if the connection cable is damaged. Replacement parts require official authorization to avoid hazards. Regular cleaning extends lifespan significantly.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly