Manual.ly Logo

Canton AR-800 Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 2

Loading...
30210522f71b0e6fc6b6ee368af82cf4b955 page 1
Canton Elektronik GmbH + Co. KG
Neugasse 21– 23 · 61276 Weilrod
www.canton.de
English Deutsch
Our AR speakers are specialist loudspeakers licensed by Dolby Laborato-
ries and developed for use as a ceiling reflection system in a home cinema
setup with Dolby Atmos
®
technology. The reflection off the ceiling creates
sound events above the listener, to produce the effect of a three-dimensional
sound. In addition, the AR speakers, mounted on the wall beneath the cei-
ling, can also be used as high quality sound effect speakers (e.g. front high
speakers). In a stereo setup the AR speakers act as direct main speakers and
can be used in connection with a subwoofer as stereo satellites. In this case
the AR speakers are mounted on the wall above ear height with the tweeter
facing down.
Application:
To use the AR speakers as ceiling reflection speakers in a system with Dolby
Atmos
®
technology, simply position it on your front resp. rear speakers. The
fabric cover must point upwards and the narrow side of the cabinet must
point in the direction of the listener. The optimal sound experience is created
with a ceiling height of between 2.20 and 3.70 metres. For the perfect setup
please refer to the instructions of Dolby Laboratories at www.dolby.de and
read the instructions of your control unit to ensure the correct setup of the
device.
The bracket built into the cabinet makes it easy to mount the AR speakers on
the wall with a single screw. For stable wall installation we recommend that
the equipment feet provided, are mounted on the back of the speaker.
Setup:
Unsere AR Lautsprecher sind von Dolby Laboratories lizensierte Speziallaut-
sprecher, die für den Einsatz als Deckenreflexionssysteme in einem Heimkino
Setup mit Dolby Atmos
®
Technologie entwickelt wurden. Durch die Reflexi-
on an der Zimmerdecke werden durch sie, Schallereignisse über dem Hörer
abgebildet und es entsteht der Effekt eines dreidimensionalen Klangbildes.
Außerdem können die AR Lautsprecher, unterhalb der Zimmerdecke an der
Wand montiert, auch als hochwertige Effektlautsprecher (z.B. Front-High)
verwendet werden. In einem Stereo-Setup werden die AR Lautsprecher zu
direktstrahlenden Hauptlautsprechern und können, in Verbindung mit einem
Subwoofer, auch als Stereo-Satelliten eingesetzt werden. Hierbei werden die
AR Lautsprecher, mit dem Hochtöner nach unten und oberhalb der Ohrhöhe
hängend, an der Wand montiert.
Verwendung
Bei Verwendung als Deckenreflexionslautsprecher in einem System mit Dolby
Atmos
®
Technologie positionieren Sie die AR Lautsprecher liegend auf Ihren
Front- bzw. Rear-Lautsprechern. Dabei muss die Stoffabdeckung nach oben
und die schmale Seite des Gehäuses in Richtung Hörplatz zeigen. Ein opti-
males Hörerlebnis stellt sich dann bei einer Deckenhöhe zwischen 2,20 und
3,70 Meter ein. Beachten sie für eine optimale Aufstellung auch die Hinweise
der Dolby Laboratories unter www.dolby.de und lesen Sie für die korrekte
Einstellung des Geräte-Setups die Anleitung ihres Steuergerätes.
Durch die im Gehäuse integrierte Halterung können die AR Lautsprecher
problemlos, mit nur einer Schraube, an der Wand montiert werden. Für ein
stabiles Anliegen an der Wand empfehlen wir hier die Verwendung der mit-
gelieferten Gerätefüße auf der Rückseite des Lautsprechers.
Aufstellung
In Lizenz von Dolby Laboratories gefertigt. Dolby, Dolby Atmos und das Doppel-D-Symbol sind Wa-
renzeichen von Dolby Laboratories. Manufactured under license from Dolby Laboratories. Dolby, Dolby
Atmos, and the “double-D“ symbol are trademarks of Dolby Laboratories.

Chat with your Canton AR-800 manual using AI

Get instant AI answers from your Canton AR-800 manual

Ask anything about the Canton AR-800. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend AR-800?

Yes No

Frequently Asked Questions

A

Use the built-in bracket and one screw for wall mounting. Mount equipment feet on the back for stability. Position the speaker with the fabric cover upwards for ceiling reflection mode.

Is this answer helpful?

A

Yes, the AR-800 is licensed by Dolby Laboratories. It is designed to create ceiling reflection sound events for three-dimensional audio.

Is this answer helpful?

A

The width is nineteen point five centimeters, height is twenty-seven centimeters, and depth is fourteen point five centimeters. Weight is approximately three point six kilograms.

Is this answer helpful?

A

The frequency response extends from fifty Hertz to forty thousand Hertz. This covers deep bass and high treble details for a wide listening range.

Is this answer helpful?

A

Yes. In stereo mode, mount the speaker above ear height with the tweeter facing down. It acts as a direct main speaker with a subwoofer.

Is this answer helpful?

A

The woofers utilize different materials depending on the specific variant. The AR-800 uses a titanium cone for accurate low frequencies.

Is this answer helpful?

A

While optional for basic use, a subwoofer is recommended in stereo setups to complete the bass response. It enhances the overall experience significantly.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Dolby Laboratories licensed for Atmos compatibility
  • Versatile mounting options: wall or shelf
  • High power handling up to 100 watts
  • Wide frequency response from 50Hz to 40kHz
  • Simple single screw wall mounting bracket
VS

Disadvantages

  • Requires specific ceiling height for optimal reflection
  • Tweeter orientation critical for stereo mode
  • Weight adds stress to standard wall anchors
  • Placement must be precise for 3D effect
  • Requires a control unit for routing setup
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Surround Speaker

Design

2-Way

Tweeter

1x 1 inch

Woofer

1x 6 inches

Frequency Range

50Hz-30kHz

Power Handling

60W RMS, 100W Peak

Impedance

8 Ohms

Sensitivity

86dB

Features

Dolby Atmos

Dimensions (WxHxD)

7.68 x 10.63 x 5.71 inches

Weight per Unit

7.94 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Canton AR-800 Audio Excellence

Experience the pinnacle of home cinema audio with the Canton AR-800. This specialist loudspeaker is designed specifically for Dolby Atmos integration. Licensed by Dolby Laboratories, the unit creates sound events above the listener. Reflection off the ceiling produces a genuine three-dimensional audio effect. It is a bridge to immersive entertainment. Many enthusiasts consider this model essential for modern systems. The design prioritizes clarity and spatial positioning.

Flexible Configuration Options

The AR-800 allows for multiple usage scenarios within your home theater environment. When mounted beneath the ceiling on the wall, it functions as high-quality sound effect speakers. These are ideal for front height channels in complex setups. In a standard stereo configuration, these units act as direct main speakers. They pair exceptionally well with a subwoofer to form stereo satellites. This adaptability makes installation easy for various room layouts. You are not limited to a single placement strategy.

Installation Details

Installing the Canton AR-800 is streamlined with the built-in bracket inside the cabinet. This mechanism allows for secure wall mounting with a single screw. For stable installation, use the provided equipment feet mounted on the back. Positioning is critical for the ceiling reflection system to work. The fabric cover must point upwards while placing it on front speakers. The narrow side faces the listener for best dispersion. The integrated hardware simplifies the physical process considerably.

Performance Specs

Sound reproduction is handled by a robust two-way system design. The bass driver utilizes a 160 mm titanium cone for low frequencies. A 25 mm aluminum-manganese dome tweeter handles high frequencies effectively. The frequency response extends from fifty Hertz to forty thousand Hertz. This wide bandwidth captures subtle details often missed by cheaper components. Power handling capabilities reach one hundred watts during music peaks. Impedance remains between four and eight Ohms for compatibility. The efficiency rating is high for most home environments.

Dimensions and Weight

The cabinet measures roughly nineteen point five centimeters in width. Height stands at twenty-seven centimeters with a depth of fourteen point five centimeters. Unit weight is approximately three point six kilograms per speaker. The compact size helps blend into various room acoustics without obstruction. Carton content includes feet and fabric grills alongside the speaker. The finish is matte and durable. It resists fingerprints common on glossy surfaces.

Setup Guidelines

Optimal sound experiences require a ceiling height between two point two and three point seven meters. Incorrect positioning diminishes the Dolby Atmos effect significantly. It is important to follow the setup of the signal routing. Dolby Laboratories provides detailed guidelines online for configuration. Following these steps guarantees intended audio performance. Always verify cable connections before powering the equipment.

Additional Notes

Check room acoustics for best results. Use the provided grills for safety and aesthetics. Ensure wall anchors support the weight.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly