Manual.ly Logo

Candy CKBBS 100 Manual

0.0 · 0 Ratings

PDF manual · 133 Pages

English

M: OA-GPT-5-NAN
page

/ 133

Loading...
dade5a7d334191383a3024e7222090e65818 page e
EN 12
Thank you for purchasing this product.
Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for
subsequent use or for other owners. This product is intended solely for household use or similar applications such as:
- the kitchen area for personnel in shops, offi ces and other working environments
- on farms, by clientele of hotels, motels and other environments of a residential type
- at bed and breakfasts (B & B)
- for catering services and similar applications not for retail sale.
This appliance must be used only for purposes of storage of food, any other use is considered dangerous and the manufacturer will not be respon-
sible for any omissions. Also, it is recommended that you take note of the warranty conditions.
The refrigerator contains a refrigerant gas (R600a: isobutane) and insulating gas (cyclopentane), with
high compatibility with the environment, that are, however, inflammable.
We recommend that you follow the following regulations so as to avoid situations dangerous to you:
• Before performing any operation, unplug the power cord from the power socket.
• The refrigeration system positioned behind and inside the refrigerator contains refrigerant. Therefore,
avoid damaging the tubes.
• If in the refrigeration system a leak is noted, do not touch the wall outlet and do not use open flames.
Open the window and let air into the room. Then call a service centre to ask for repair.
• Do not scrape with a knife or sharp object to remove frost or ice that occurs. With these, the refrigerant
circuit can be damaged, the spill from which can cause a fire or damage your eyes.
• Do not install the appliance in humid, oily or dusty places, nor expose it to direct sunlight and to water.
• Do not install the appliance near heaters or inflammable materials.
• Do not use extension cords or adapters.
• Do not excessively pull or fold the power cord or touch the plug with wet hands.
• Do not damage the plug and/or the power cord; this could cause electrical shocks or fires.
• It is recommended to keep the plug clean, any excessive dust residues on the plug can be the cause fire.
• Do not use mechanical devices or other equipment to hasten the defrosting process.
• Absolutely avoid the use of open flame or electrical equipment, such as heaters, steam cleaners,
candles, oil lamps and the like in order to speed up the defrosting phase.
• Do not use or store inflammable sprays, such as spray paint, near the refrigerator. It could cause an
explosion or fire.
• Do not use electrical appliances inside the food storage compartments, unless they are of the type
recommended by the manufacturer.
• Do not place or store inflammable and highly volatile materials such as ether, petrol, LPG, propane gas,
aerosol spray cans, adhesives, pure alcohol, etc. These materials may cause an explosion.
• Do not store medicine or research materials in the refrigerator. When the material that requires a strict
control of storage temperatures is to be stored, it is possible that it will deteriorate or an uncontrolled
reaction may occur that can cause risks.
• Maintain the ventilation openings in the appliance enclosure or in the built-in structure, free of
obstruction.
• Do not place objects and/or containers filled with water on the top of the appliance.
• Do not perform repairs on this refrigerator. All interventions must be performed solely by qualified
personnel.
• This appliance can be used by children aged from 8 years and above and by persons with reduced
physical, sensory or mental capabilities or with a lack of experience and knowledge, provided that they
have been given adequate supervision or instruction concerning how to use the appliance in a safe way
and understand the hazards involved.
Children should not play with the appliance. Cleaning and user maintenance should not be made by
children without supervision.
Turning the knob fully counterclockwise, you will hear a click which corresponds to the switch-off of
the product.
When the appliance is installed, the electrical cord and the current socket must be easily reached.
The socket is compatible with the plug of the appliance. If not, request replacement of the plug
by an authorized technician; do not use extension cords and/or multiple connectors.
Do not touch the internal parts or frozen food with moist or wet hands as it can cause burns.
SAFET INFORMATION

Chat with your Candy CKBBS 100 manual using AI

Get instant AI answers from your Candy CKBBS 100 manual

Ask anything about the Candy CKBBS 100. Answers come from this manual, with the pages they are based on.

CKBBS 100 Maintenance Schedule

When frost exceeds 3 mm
Defrost freezer compartment

Remove frozen food and defrost when frost layer exceeds 3 mm to reduce energy consumption. Do not use sharp objects or open flames.

Show in the manual (page 18)
As needed
Clean drain tube

Keep the drainage pipe in the refrigerator compartment clean to prevent water accumulation. Use a stick if clogged.

Show in the manual (page 17)
Whenever dusty
Vacuum rear of appliance

Remove dust from the back of the appliance with a vacuum cleaner after unplugging to improve energy efficiency.

Show in the manual (page 18)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend CKBBS 100?

Yes No

Frequently Asked Questions

A

After installation, wait 2–3 hours to allow the appliance temperature to stabilize before placing fresh or frozen foods inside. After transport, if the fridge was laid down, keep it upright and still for 2–3 hours before powering.

Is this answer helpful?

A

Level 1 is the warmest and level 4 the coldest. For normal use an intermediate setting (level 2) is recommended. Advanced settings allow sub-level adjustments for finer temperature control.

Is this answer helpful?

A

If frost exceeds ~3 mm, press the ON/OFF button, unplug the appliance, remove frozen food to a cool place, leave the door open to speed defrosting, collect and dry water, then reconnect and reset temperature. Never use open flames or sharp tools.

Is this answer helpful?

A

Check doors are fully closed and seals intact, avoid frequent door openings, ensure ambient temperature is within the appliance climate class range, defrost if necessary, and remove dust from the rear condenser. Contact service if noise persists.

Is this answer helpful?

A

Clean internal parts, gaskets and accessories with warm water and baking soda or neutral soap. Do not use solvents, ammonia, bleach or abrasive products to avoid damage.

Is this answer helpful?

A

Yes, the model is built for column installation. Maintain a 3–5 mm gap and ensure the column has a rear chimney and ventilation grille so the condenser can dissipate heat properly.

Is this answer helpful?

A

The appliance contains R600a and cyclopentane which are flammable; avoid damaging refrigerant circuits, do not use open flames near leaks, ventilate the area and call authorized service if a leak is suspected.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Built-in design integrates with kitchen columns and includes instructions for panel coupling and hinge reversal.
  • Simple user interface with ON/OFF button, 4 temperature levels and advanced sub-level tuning for precise control.
  • Automatic fridge defrosting with clear guidance for freezer defrost when frost exceeds ~3 mm.
  • Energy-saving recommendations and rear dust removal guidance to keep efficiency high.
  • LED illumination and optional compartment fan (activatable above ~28–30°C) for better visibility and circulation.
VS

Disadvantages

  • Contains flammable refrigerant and insulating gases, requiring careful handling and avoidance of open flames.
  • Hinge reversal and some installations require qualified technicians and may not be covered by warranty.
  • May build up frost if installed in high ambient temperatures or with frequent door openings.
  • Some maintenance tasks (e.g., defrosting non-No‑Frost freezers) require manual intervention and temporary food relocation.
  • No repair should be performed by users; service center contact needed for many faults.
M: OA-GPT-5-NAN

Product Specification

Type

built-in

Old energy efficiency class

A+ (A+++ to D)

Old energy consumption

264kWh/year

Front color

white

Side color

white

Fridge compartment capacity

50.17gal (top)

Freezer compartment capacity

15.85gal (bottom)

Total capacity

66.04gal

Star rating

4

Freezing capacity in 24h

7.72lb

Storage time during power failure

19h

Display

no

Special features

Vegetable compartment, LED lighting, Door alarm

Climate class

N/ST

Noise level

40dB(A)

Dimensions

21.26x69.69x21.26in (WxHxD)

M: OA-GPT-54-NAN

Product Description

Candy CKBBS 100 — Practical Guide and Overview

The Candy CKBBS 100 is a built-in refrigerator designed for everyday domestic use, combining compact built-in dimensions with practical features focused on food preservation, energy efficiency, and user safety. It uses modern refrigerant technologies (R600a/isobutane and cyclopentane insulation) that are environmentally friendlier while requiring standard safety precautions due to their flammability. The unit is intended for home kitchens and similar non-retail applications such as staff kitchens, B&Bs, small hospitality settings, and farmhouses.

Key features and operation

The control interface is simple: an ON/OFF button, a temperature-level selector (levels 1–4, with intermediate sub-levels available), and LED indicators showing the selected setting. The fridge offers an audible door-open alarm if left open for more than 90 seconds. Some models include a fan for better internal air circulation (recommend enabling it when ambient temperature exceeds ~28–30°C) and an indicator showing the coldest zone inside the refrigerated compartment.

Temperature settings are straightforward: level 1 is warmest, level 4 coldest; an intermediate advanced menu allows fine tuning. After installation, allow 2–3 hours for temperature stabilization before loading fresh or frozen foods. If power is disconnected, wait at least five minutes before restarting to protect the compressor.

Built-in design and installation

The CKBBS 100 is designed for column or built-in installation with clear guidance for hinge reversal, panel coupling, and ventilation spacing (3–5 mm gap). Proper ventilation around the condenser is essential for reliable operation; built-in columns should have a rear chimney and ventilation grille. Hinge reversal and panel coupling should be performed by qualified technicians.

Food storage, freezing and defrosting

Shelving layout and compartment recommendations help preserve flavor and freshness: wrap foods or use sealed containers to avoid cross-contamination, store fruits/vegetables in the designated drawer (preferably wrapped), and avoid placing bottles in the freezer. Freezing guidance emphasizes freezing small batches, sealing items airtight, labeling containers, and not refreezing thawed foods. The fridge typically defrosts automatically; the freezer may require manual defrosting when frost exceeds about 3 mm.

Maintenance, cleaning and energy tips

Clean internal parts and gaskets with warm water and baking soda or neutral soap; avoid solvents, bleach, or abrasives. Keep the drainage tube clear and vacuum dust from the rear to improve efficiency. To save energy: install away from heat sources and direct sunlight, avoid overloading, minimize door openings, defrost when needed, and keep rear dust-free.

Safety and troubleshooting

Follow electrical and refrigerant safety rules: unplug before servicing, do not use sharp tools to remove ice, avoid open flames, and do not store flammable or volatile substances inside. For issues like inadequate cooling, excessive noise, water in drawers, or Wi‑Fi connectivity signals, consult the troubleshooting section for likely causes (door not sealed, wrong temperature setting, excessive loading, ambient temperature out of spec) and contact authorized service if unresolved.

Notes

  • Allow 2–3 hours after installation for stabilization.
  • Wait at least 5 minutes before restarting after power loss.
  • Hinge reversal is a technical service task and not covered by warranty.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly