Manual.ly Logo

BYD Battery-Box Premium LVS Manual

0.0 · 0 Ratings

PDF manual · 47 Pages

English

M: OA-GPT-5-NAN
page

/ 47

Loading...
88c2ec02e1465a2cd0b956792cb4fb728794 page 2b
42
12. Maintenance and Storage
Cleaning
It is recommended that the battery system be cleaned periodically. If the enclosure is dirty, please
use a soft, dry brush or a dust collector to remove the dust. Liquids such as solvents, abrasives, or
corrosive liquids should not be used to clean the enclosure.
Maintenance
The battery module should be stored in an environment with a temperature range between -10°C~
+50°C, and charged regularly according to the table below with no more than 0.5 C (A C-rate is a
measure of the rate at which a battery is discharged relative to its maximum capacity. ) to the SOC of
40% after a long time of storage.
Storage environment
temperature
Relative humidity of the
storage environment
Storage time
SOC
Below -10℃
/
Not allowed
/
-10~25℃
5%~70%
≤ 12 months
25%≤SOC≤60%
25~35℃
5%~70%
≤ 6 months
25%≤SOC≤60%
35~50℃
5%~70%
≤ 3 months
25%≤SOC≤60%
Above 50℃
/
Not allowed
/
NOTICE
Damage to the system due to under voltages
•
Charge the over-discharged system within seven days when the temperature is above 25°C.
•
Charge the over-discharged system within fifteen days when the temperature is below 25°C.

Chat with your BYD Battery-Box Premium LVS manual using AI

Get instant AI answers from your BYD Battery-Box Premium LVS manual

Ask anything about the BYD Battery-Box Premium LVS. Answers come from this manual, with the pages they are based on.

Battery-Box Premium LVS Maintenance Schedule

Remind me when maintenance is due
Yearly
Clean the enclosure

Use a soft dry brush or dust collector to remove dust. Do not use liquids, solvents, abrasives, or corrosive liquids.

Show in the manual (page 43)
Periodic
Charge battery during storage

Store at -10C to +50C and charge regularly according to temperature table with no more than 0.5 C rate to 40% SOC after long storage.

Show in the manual (page 43)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Battery-Box Premium LVS?

Yes No

Frequently Asked Questions

A

The LVS series includes LVS 4.0, 8.0, 12.0, 16.0, 20.0 and 24.0, built from 4 kWh modules (51.2 V each). System usable energy ranges from 4 kWh to 24 kWh depending on module count; modules can be stacked into towers with defined parallel limits.

Is this answer helpful?

A

Use BYD’s Be Connect mobile app or Be Connect Plus for PC. Connect to the BMU WLAN or Ethernet, download the latest firmware to your device, then update and configure model, module count per tower, grid and phase options following the app prompts.

Is this answer helpful?

A

The manual details hazard levels (DANGER, WARNING, CAUTION, NOTICE), procedures for leakage, firefighting (ABC/CO2 recommended), handling/storage limits, weight precautions, surge protection guidance, and requirements that qualified personnel perform installation and commissioning.

Is this answer helpful?

A

BMU supports WLAN and Ethernet. Be Connect (mobile), Be Connect Plus (PC) and BYD Be Connect Monitoring enable firmware updates, configuration, remote diagnostics and service. Ethernet connection is recommended for remote monitoring but not mandatory.

Is this answer helpful?

A

DC cables use 35/50/70 mm² conductors per application and must be balanced across towers. Data cables require shielded Cat5/Cat5e or better (metal RJ45), max 10 m runs, UV resistance for outdoor routing, and proper gland sealing at BMU/PDU.

Is this answer helpful?

A

Yes, parallel connection is supported but constrained: up to four modules per tower when parallelized and a maximum of 16 towers in parallel under specific configuration rules. LVS 20.0 and 24.0 are single-tower only.

Is this answer helpful?

A

Store between -10 °C and +50 °C with SOC 25–60% for long-term storage; recharge periodically with ≤0.5C to 40% SOC. Clean with a dry brush or dust collector and avoid solvents. Follow specified storage duration limits by temperature band and charge over-discharged systems within the recommended timeframes.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • High round-trip efficiency (≥95%) with scalable modular design from 4–24 kWh per system.
  • Robust LFP chemistry (cobalt-free) and IP55-rated enclosure for indoor/outdoor installations.
  • Integrated BMU with Ethernet/Wi‑Fi, remote monitoring and firmware updates via Be Connect.
  • Clear installation and commissioning procedures with defined cable, grounding and safety specs.
  • Comprehensive safety guidance, certifications (VDE/IEC/CE/UN38.3) and a 10-year warranty (conditions apply).
VS

Disadvantages

  • Heavy modules (≈45 kg each) require proper handling and mounting; lifting risk noted.
  • Complex parallel-tower limits and inverter compatibility requirements may constrain expansion.
  • Some region-specific parts (e.g., PDU with air switch for Australia) complicate ordering.
  • Data and DC cabling have strict shielding, length and cross-section requirements for reliable operation.
  • Certain safety and warranty conditions require installation by qualified personnel only.
M: OA-GPT-5-NAN

Product Specification

Note

Prices partly include 0% VAT tax rates for AT and DE

Battery type

LiFePO4

Nominal voltage

51.2V

Operating temperature

14 F to 122 F

Display

no

Interfaces

Wi-Fi (WLAN), RS-485

Mounting type

freestanding (stackable)

IP rating

IP55

M: OA-GPT-54-NAN

Product Description

BYD Battery-Box Premium LVS — BYD Battery-Box Premium LVS Manual

The BYD Battery-Box Premium LVS is a modular 48 V lithium iron phosphate battery system designed for residential energy storage and PV integration. Available in configurations from 4.0 kWh to 24.0 kWh (LVS 4.0–24.0), it supports single- and three-phase inverters, backup operation and both on-grid and off-grid modes. The system is built from 4 kWh battery modules (51.2 V, 45 kg each) that stack into towers; a tower can contain 1–6 modules (with parallel tower constraints) and up to 16 towers can be paralleled under specific limits. The BMU (Battery Management Unit) with IP55 protection coordinates monitoring, communication and safety functions.

Key features and operation

The LVS emphasizes safety and scalability: LFP (cobalt-free) cells, CAN/RS485 communication, and an IP55-rated enclosure yield robust indoor or outdoor performance between -10 °C and +50 °C. Typical round-trip efficiency is ≥95%, with continuous and peak current limits specified per model and derating at low temperatures. The system includes a PDU, BMU, and optional region-specific components (e.g., air switch for Australia). It supports firmware updates, monitoring and configuration through BYD’s Be Connect mobile app, Be Connect Plus for PC, and Ethernet-based remote services.

Installation and commissioning follow clear mechanical, electrical and data-cable procedures: secure mounting to solid surfaces, correct DC and PE connections with specified cable cross-sections (35/50/70 mm² options), shielded Cat5/Cat5e or higher for data links, and careful balancing of cable lengths when multiple towers are used. Commissioning uses the Be Connect app to set model, module count per tower, grid/phase options and to update firmware. The BMU LED indicates states (idle, charging, discharging, low SOC) and error codes, aiding troubleshooting.

Safety and maintenance are central: the manual details hazard levels (DANGER, WARNING, CAUTION, NOTICE), battery leakage and firefighting measures (ABC/CO2 recommended; water discouraged), handling/storage limits, and required qualified personnel for installation. Storage guidance prescribes SOC ranges and temperature/humidity limits, and disposal must follow local e-waste and battery regulations. BYD provides certifications (VDE/IEC/CE/UN38.3) and a 10-year warranty subject to terms.

Notes

  • Compatible inverters are listed in BYD’s Minimum Configuration List; compliance is required for warranty.
  • Parallel-tower and module limits differ by model; LVS 20.0 and LVS 24.0 are single-tower only.
  • Connect the BMU to the Internet for remote diagnostics and firmware updates via Be Connect Monitoring.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly