Manual.ly Logo

Britax Romer Trifix 2 i-Size Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: gpt-5.6-terra
page

/ 2

Loading...
b75e58ae760621f1e49a5c1e55b11ac346f4 page 1
06
05
Seat shell
ISOFIX locking arms
Fabric loop
Operating instructions compartment
Adjusting ring of the headrest
Tilt adjustment lever
Adjustment belt
Adjustment button
Shoulder straps
Shoulder pads
Release button
Harness buckle
Headrest
ISOFIX insertion aids
ISOFIX fastening points (car)
Top tether
1. PRODUCT OVERVIEW
2. APPROVAL
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNUNG! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
3. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the
operating instructions of your vehicle. During use, be sure to observe any restric-
tions relating to airbags.
Please refer to the operating instructions for your vehicle for information about
vehicle seats which are certified for the use of children's restraining systems according
to ECE R16.
TRIFIX² i-SIZE usage options:
BRITAX RÖMER
child safety seat
Vehicle seat position with ISOFIX and
top tether
i-Size
Not i-Size
TRIFIX² i-SIZE
You can use your child safety seat as follows:
In the direction of travel Yes
1)
Against the direction of
travel
No
On seats featuring:
ISOFIX fastenings (be-
tween the seat surface
and backrest) and top
tether anchoring points
(e.g. on the loading area,
on the floor or behind the
backrest)
Yes
2)
(Please observe the applicable regulations in force in your country)
1) Using the seat in a backwards-facing car seat (e.g. in a van or minibus) is only permitted if
the car seat is also approved for transporting adults. The seat may not be in the area of eect
of an airbag.
2) If there is a passenger airbag: Slide the passenger seat well backwards and follow any
relevant directions in your vehicle's operating instructions.
76–105cm
≤ 22kg
Safety button
06
05
04
03
02
01
12
11
10
09
08
07
17
16
15
14
13
04
03
12
13
14
15
01 02
07
08
09
10
11
17
16
We are pleased that you have chosen our
TRIFIX² i-SIZE
to accompany your child safely through a new stage of his or her life.
In order to protect your child correctly, the
TRIFIX² i-SIZE
must always be used and installed as described in these instructions.
The
TRIFIX² i-SIZE
is exclusively intended to secure your baby
in your vehicle.
BRITAX RÖMER
child safety seat
Tested and approved according to
ECE* R 129/01
Body size Body weight
TRIFIX² i-SIZE
76–105 cm ≤ 22 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and approved according to
the requirements of the European Standard for Child Safety Equipment (ECE
R 129/01). The seal of approval "E" (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER! This certification will be invalidated if you make any modifica-
tions to the child safety seat. Only the manufacturer is permitted
to make modifications to the child safety seat. Unauthorised
technical changes can cause the protective function of the
seat to be reduced or completely eliminated. Do not make any
technical changes to the child safety seat.
DANGER! Use the
TRIFIX² i-SIZE
exclusively for securing your child in your
vehicle. It is in no way suitable for use as a seat or toy in the
home.
PAGE I
4. CARE AND MAINTENANCE
Cleaning
Please only use authentic BRITAX RÖMER replacement seat covers. The
seat cover is an integral part of the child safety seat and is key to ensuring the
trouble-free functionality of the system. Replacement seat covers are available
from your dealer.
• The cover can be removed and washed with a mild detergent in the
delicates programme of the washing machine (30°C). Please observe the
instructions on the washing label of the cover.
• The shoulder pads can be removed and washed in luke-warm soapy
water.
• The plastic parts and the harness can be cleaned with soapy water. Do not
use any caustic cleaning agents (such as solvents).
Care for the harness buckle
To ensure the safety of your child, it is absolutely essential that the harness
buckle continues to function correctly. Harness buckle malfunctions are usu-
ally caused by a build-up of soiling or by external objects:
• When you press the red release button, it takes a long time for the buckle
tongues to be ejected.
• The buckle tongues no longer engage (i.e. when you try to push them in,
they pop out again).
• The buckle tongues engage without an audible "click".
• The buckle tongues are dicult to push in (you feel a certain amount of
resistance).
• The buckle can only be opened by applying extreme force.
Remedy: Clean the harness buckle so that it functions properly again with no
trouble:
Cleaning the harness buckle
1. Open the harness buckle
04
(press the red release button).
2. Unhook the elastic seam of the cover from the bottom edge of the seat
shell
17
.
3. Open the Velcro fastener on the crotch pad
18
and pull it over the harness
buckle
04
along with the cover.
4. Rotate the crotch harness with the metal plate
19
which holds the har-
ness buckle
04
in the seat shell
17
by 90° in the longitudinal slot.
5. Slide the metal plate
19
through the harness slot
20
with the narrow edge
facing forwards.
6. Soak the buckle
04
in warm water containing washing-up liquid for at least
an hour. Rinse the buckle thoroughly and dry it.
7. Slide the metal plate
19
fully into the longitudinal slot from the front.
8. Rotate the crotch harness with the metal plate
19
by 90° until it is hooked
into the harness slot
20
on the seat shell
17
perpendicular to the direction
of motion.
DANGER! Tug hard on the harness buckle
04
to make sure that it is
secure in the seat shell
17
.
9. Thread the harness buckle
04
through the crotch pad
18
on the cover
and then re-fasten the Velcro fastener and the cover.
Removing the cover
1. Push the tilt adjustment lever
11
upwards and slide back the seat shell
17
to upright position.
2. Loosen the shoulder straps
08
as far as possible.
3. Open the harness buckle
04
(press the red release button).
4. Open the Velcro fastener on the crotch pad
18
.
5. Slide the headrest
03
into the lowest position.
6. Pull o the cover of the headrest
03
.
7. Open the snap fasteners on the left and right of the rear part of the cover.
8. Turn over the rear part of the cover onto the seat surface.
9. Thread the shoulder straps
08
through the recesses in the cover. Unhook
the elastic seam of the cover from the bottom edge of the seat shell.
TIP: Start with the handles on the side and top of the seat shell.
10. Pull the cover up and over the border of the strap adjuster.
11. Unthread the harness buckle
04
and the strap end
09
from the cover.
12. Pull the cover upwards a little and then put it with the recess over the
headrest
03
.
DANGER! The child seat must not be used without the seat cover.
Reattaching the cover:
Proceed in reverse order to put on the cover.
Caution: The harnesses must not be twisted and must be correctly posi-
tioned in the harness slots.
Removing the shoulder pads
1. Loosen the shoulder straps
08
as far as possible.
2. Slide the headrest
03
into the second position from the top.
3. Fold up the bottom part of the headrest
03
upwards.
4. Open the shoulder pads
07
at the Velcro fasteners at the side.
Rear of the child safety seat
5. Open the operating instructions compartment
14
.
6. Pull out the shoulder straps
08
a little so that you can see the strap loops
of the shoulder pads
07
underneath.
7. Unhook the strap loops from the plastic fasteners
25
of the height ad-
juster.
8. Pull the shoulder pads
07
forwards out of the harness slots.
Re-attaching the shoulder pads:
Simply follow the steps above in reverse order.
Caution: The shoulder pads
07
or harnesses must not be twisted or
changed places. The shoulder straps
08
must be located under the black
cover band
21
in the shoulder pads
07
.
18
04
04
18
19 20
08
11
03
08
03
07
07
25
08
76–105cm
≤ 22kg
TRIFIX² i-SIZE
User instructions
www.britax.com
2000029654 17/10
GB

Chat with your Britax Romer Trifix 2 i-Size manual using AI

Get instant AI answers from your Britax Romer Trifix 2 i-Size manual

Ask anything about the Britax Romer Trifix 2 i-Size. Answers come from this manual, with the pages they are based on.

Trifix 2 i-Size Maintenance Schedule

As needed
Clean the seat cover

Remove and wash with mild detergent in washing machine at 30 C. Check care label.

As needed
Clean shoulder pads

Remove and wash with lukewarm soapy water.

As needed
Clean plastic parts and harnesses

Wipe with soapy water. Do not use sharp cleaning agents like solvents.

As needed
Clean buckle mechanism

If sticking or failing to latch, soak buckle in warm water with dish soap for one hour, rinse and dry.

After every accident over 10 km/h
Replace child seat

The seat must be replaced after an accident with impact speed over 10 km/h even if damage is not visible.

When damaged
Inspect and replace if damaged

Have the seat checked if it has been damaged or dropped. Replace if necessary.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Trifix 2 i-Size?

Yes No

Frequently Asked Questions

A

It is designed for children measuring 76 to 105 cm, with a maximum body weight of 22 kg. Check both your child's measurements and local child-restraint rules before use.

Is this answer helpful?

A

The seat is fitted forward-facing with ISOFIX connectors and a Top Tether. Both ISOFIX indicators should show green, and the Top Tether tension indicator should also be green after tightening.

Is this answer helpful?

A

No. The selected vehicle seat must have approved ISOFIX attachment points and a Top Tether anchorage. Consult the vehicle handbook for permitted seating positions and airbag-related restrictions.

Is this answer helpful?

A

Set the headrest so the shoulder straps run at the child's shoulder height or slightly above it. The straps must lie flat, must not be twisted, and should never run behind the child's back or near the ears.

Is this answer helpful?

A

Yes. The seat shell offers three recline positions. After changing the angle, confirm that the shell has locked securely by pulling on it gently.

Is this answer helpful?

A

Wash the removable cover at 30 C on a gentle cycle with mild detergent. Clean plastic parts and harnesses with soapy water. If the buckle is dirty or slow, clean it as directed and make sure it functions correctly before use.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • i-Size approved for children from 76 to 105 cm and up to 22 kg.
  • ISOFIX and Top Tether create a stable installation with visible green confirmation indicators.
  • Adjustable headrest helps maintain correct shoulder-harness placement as a child grows.
  • Three recline positions add flexibility for everyday trips and longer journeys.
  • Removable washable cover supports routine cleaning and upkeep.
VS

Disadvantages

  • Requires a vehicle seating position with both ISOFIX anchors and a Top Tether anchorage.
  • Forward-facing use only, so it is not suitable for rear-facing travel.
  • Correct setup requires checking ISOFIX indicators and Top Tether tension before every journey.
  • The seat must be replaced after a collision above 10 km/h, even if damage is not obvious.
M: gpt-5.6-terra

Product Specification

Group

i-Size

Weight class

19.84-48.5 lb

Age group

15 months-4 years

Color

blue

Harness system

five-point safety harness

Installation

forward-facing

ISOFIX

yes, including ISOFIX base with top tether

Features

height-adjustable headrest and shoulder straps, side-impact protection, adjustable seating position, recline position, removable/washable cover, installation indicators, anti-tip system

Dimensions (W x H x D)

17.72 x 25.59 x 21.26 in

Weight

23.15 lb

M: gpt-5.6-terra

Product Description

Britax Romer Trifix2 i-Size Blue Marble 2018/2019 Manual

The Britax Romer Trifix2 i-Size Blue Marble 2018/2019 is a forward-facing child car seat designed to support young passengers through an important stage of growth. Suitable for children measuring 76 to 105 cm and weighing up to 22 kg, it is approved to ECE R129/01, also known as the i-Size safety standard. Its Blue Marble finish gives the seat a modern, versatile appearance while the design focuses on secure daily travel.

ISOFIX and Top Tether installation

This model installs using both ISOFIX connectors and a Top Tether. The ISOFIX arms connect directly to approved anchor points in the vehicle, while the Top Tether attaches to the designated anchorage point behind or above the vehicle seat. Clear green indicators help confirm that the ISOFIX connection is locked, and the Top Tether tension indicator turns green when the strap is correctly tightened.

The seat is intended for use in the direction of travel only. Before fitting it, check that the chosen vehicle position has ISOFIX points and a Top Tether anchorage, and always follow vehicle-specific child-seat instructions. A securely fitted seat should not be used as a loose item in the car, even when no child is travelling in it.

Everyday comfort and adjustment

The Trifix2 i-Size has an integrated harness system with padded shoulder sections and a central buckle. The headrest can be raised as a child grows, helping position the shoulder straps at shoulder height or slightly above. This adjustment is important because straps that sit too high, too low, twisted, or loose can reduce protection.

Three recline positions allow the seat shell to be adapted for different journeys. The recline should always be checked to ensure it locks firmly into place. When securing a child, the harness should lie flat and close to the body without causing discomfort. Avoid bulky clothing under the harness, and make sure the lap section sits low across the hip area.

Care and practical checks

The removable cover can be washed on a gentle 30 C cycle with mild detergent. Plastic parts and harness webbing should be cleaned with soapy water only, avoiding solvents or harsh cleaners. Original replacement covers are recommended because the cover forms part of the seat's intended safety system.

Regularly inspect the seat, buckle, harness, and connectors for damage or dirt. If the buckle works slowly or does not click securely, it should be cleaned following the specified process. After a collision above 10 km/h, or after significant damage or a fall, the seat should be replaced or inspected as appropriate.

Notes

  • Keep the instructions stored in the seat's designated compartment.
  • Never modify the child seat or lubricate its components.
  • Protect the seat from prolonged direct sunlight when it is not in use.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly