Manual.ly Logo

Britax Romer Kidfix 2 S Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: gpt-5.6-terra
page

/ 2

Loading...
08f3153783cb939d82d7829cfddc41da669a page 1
2. INTRODUCTION
We are delighted that you have chosen our child seat to accompany your child
safely through anew stage in his or her life.
To protect your child correctly, the child seat must always be used and in-
stalled as described in these instructions!
If you have any further questions about the use of the child seat, please contact us:
Britax Childcare
Britax Römer
Kindersicherheit GmbH
Theodor-Heuss-Straße 9
89340 Leipheim
Germany
T.: +49 (0) 8221 3670-199/-299
F.: +49 (0) 8221 3670 -210
www.britax-roemer.com
Britax Childcare
BritaxExcelsior Limited
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
www.britax-roemer.com
These instructions use the following symbols:
Symbol Keyword Explanation
DANGER! Risk of serious physical injury
WARNING! Risk of minor physical injury
CAUTION! Risk of material damage
TIP! Useful notes
Instructions that follow afixed sequence are numbered.
Example:
1. Press the button...
Belt guide colours
For clear dierentiation, the two vehicle
seat belts are shown in dierent col-
ours. The diagonal strap
16
is shown in
dark red and the lap belt
15
in bright
red. The belt guides on the child safety
seat follow the same colour scheme.
16
15
3. APPROVAL
BRITAX RÖMER
Child seat
Testing and certification
In accordance with ECE* R 44/04
Group Body weight
KIDFIX² R
KIDFIX² S
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
This child seat has been designed, tested and approved according to the re-
quirements of the European Standard for Child Safety Equipment (ECE R 44/04).
The certification mark (letter E in acircle) and approval number can be found on
the orange approval label (sticker on the child seat).
DANGER! The certification is invalidated if any modifications are made to the
child seat. Only the manufacturer is permitted to make modifications to the child
safety seat. The child seat is approved for use both with and without Secure-
Guard.
WARNING! The KIDFIX² R and KIDFIX² S must be used exclusively for se-
curing your child in the vehicle. They are in no way suitable for use as aseat
or atoy in the home.
DANGER! Never secure your child or the child seat with a2-point belt. If
your child is secured in the child seat with a2-point belt only, this may cause
serious injuries, which could even be fatal.
4. USE IN THE VEHICLE
Please refer to your vehicle’s instruction manual for instructions on how to
use child restraint systems. The seat can be used in vehicles with ISOFIX an-
choring systems (see type list) and in vehicles with 3-point belts.
Please refer to your vehicle’s instruction manual for information on the seats
approved as child seats for weight class 15 to 36 kg.
The KIDFIX² R and KIDFIX² S are approved for two dierent installation
methods:
Symbol Installation type Approval type
with the ISOFIT locking arms in the ISOFIX fixing
points on the vehicle. Check the list of vehicle
types.
semi-universal
a)
with the vehicle's 3-point seat belt universal
a)
This means that the child seat may be used only in vehicles that are listed in the attached vehicle
type list. This type list is constantly being updated. The latest version can be obtained from us or
at www.britax.com
You can install your child seat as follows:
in the direction of travel Yes
against the direction of travel No
1)
with 2-point belt No
with 3-point belt
2)
Yes
with ISOFIX fixing points
(between seat surface and
backrest)
Yes
On front passenger seat Yes
3)
On outer rear seat Yes
on centre rear seat
(with 3-point belt)
Yes
4)
1)
Use is permitted on arear-facing vehicle seat (e.g. in avan or minibus) only if the vehicle seat is also
approved for use by adults. The seat must not be within the activated range of an airbag.
2)
The safety belt must be approved to ECE R 16 or acomparable standard (indicated on the belt’s
test label by an "E" or "e" inside acircle).
3)
If there is afront airbag: Slide the car seat well back and follow the related instructions in the vehi-
cle’s instruction manual.
4)
Cannot be used if the vehicle seat is equipped with a2-point belt only.
15 – 36 kg
www.britax-roemer.com
2000031236 18/09
GB
User instructions
KIDFIX² R
KIDFIX² S
15 kg - 36 kg
(~4 Y - 12 Y)
Please take the time to read these instructions carefully and keep them
to hand in the storage compartment provided on the child safety seat at all
times! The instructions must accompany the child seat if it is passed on to
athird party!
DANGER! To protect your child:
•
In the event of an accident at acollision speed of more than 10 km/h, the
child seat may be damaged without the damage being immediately visible. In
this case the child seat must be replaced. Please dispose of it properly.
•
Always have your child seat checked if it has been damaged (e.g by falling to
the ground).
•
Regularly check all important parts for damage. In particular, ensure that all
the mechanical parts are fully functional.
•
Never apply oil or grease to any parts of the child seat.
•
Never leave your child unattended on the child seat in the vehicle.
•
Only allow your child to enter and exit the vehicle on the pavement side.
•
Protect the child seat from intense direct sunlight when not in use. The child
seat can become very hot in direct sunshine. Children's skin is sensitive and
could be harmed as aresult.
•
The more snugly the belt fits over your child's body, the better the child
will be protected. Therefore, avoid having your child wear thick clothes un-
der the belt.
•
On long journeys, take regular breaks in order to give your child the chance to
run about and play.
DANGER! For the safety of all vehicle occupants:
In the case of an emergency stop or accident, unsecured objects or people may
cause injury to other occupants in the vehicle. Therefore, please always ensure
that ...
•
the backrests of the vehicle seats are locked (e.g. If there is afolding rear seat
bench, check that it is latched in place).
•
all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are
secured.
•
all persons in the vehicle have their seat belts fastened.
•
the child seat is secured whenever it is in the vehicle, even if not carrying
achild.
1. SAFETY NOTES
WARNING! For your protection when handling the child seat:
•
Never use the child safety seat in afree-standing position, even for testing.
•
When swivelling the backrest up,
12
nothing must come between the back-
rest
12
and the seat cushion
09
. You or your child’s fingers could be jammed
and injured.
•
To avoid damage, ensure that the child seat is not jammed in between hard
objects (car door, seat rails, etc.).
•
Keep the child seat in asafe place when not in use. Do not place heavy ob-
jects on the seat and do not store it directly next to sources of heat or in direct
sunlight.
CAUTION! To protect your vehicle:
•
Certain car seat covers made from more sensitive materials (e.g. velour, leath-
er, etc.) may show signs of wear when achild seat is used on them. For opti-
mum protection of your car seat covers, we recommend using the BRITAX
RÖMER car seat protector from our range of accessories.
5. CARE AND MAINTENANCE
Please ensure that you only use original BRITAX RÖMER replacement seat covers,
as the seat cover is an integral part of the child safety seat and fulfils important
functions that ensure smooth operation of the system. Replacement seat covers
are available from your dealer.
•
The cover can be removed and washed with amild detergent, selecting the
“Delicates” programme on the washing machine (30 °C). Please observe the
instructions on the washing label of the cover.
•
The plastic parts can be cleaned in soapy water. Do not use aggressive clean-
ing agents (such as solvents).
DANGER! The child safety seat must not be used without the seat cover.
Removing the seat cover
1. Push the headrest of the vehicle seat to its top position.
2. Unhook the cover hook
19
on the rear of the backrest.
3. Pull o the top part of the cover and fold it forwards onto
the seat surface.
4. Release the cover hooks
19
on the front of the backrest
and on both sides of the seat surface and loosen the
plastic cards on the front of the seat cushion.
5. Pull the cover away from the seat surface.
Removing the headrest cover
1. Unhook the cover straps
20
on the rear of the backrest.
2. Unhook the cover hooks
19
on the front of the backrest.
3. Pull the headrest cover
22
o; to do this, detach the two
hooks on the bottom of the headrest.
► The cover can now be washed. Please observe the
instructions on the washing label of the cover.
Putting the cover on
Follow the above steps in the reverse order to put the cover on.
19
19
20
6. ADJUSTING THE HEADREST
22
1. Grasp the adjustment handle
10
on the back of the
headrest
22
and pull it upwards. This unlocks the head-
rest.
2. You can now move the unlocked headrest
22
to the
desired height. When you release the adjustment han-
dle
10
, the headrest
22
locks into place.
3. Place the child seat on the car seat.
4. Sit your child on the child seat and check the height. Re-
peat the above procedure until the headrest
22
is at the
correct height.
UNFASTENING YOUR CHILD:
To unfasten your child, press the release button on the car seat buckle.
06
07
7. DISASSEMBLY AND DISPOSAL
DANGER! The child seat must always be secured when in the vehicle, even if
not carrying achild.
RE-ATTACHING THE BACKREST:
4. Follow steps 1 - 7 in paragraph 9.1 “Removing the backrest“ in the reverse
order.
Please follow the disposal regulations applying in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal recycling
Plastic parts To be placed in the corresponding container as
labelled
Metal parts Container for metals
Belt straps Container for polyester
Buckle and clip Residual waste
8. Installation with backrest
The child seat is installed permanently in the vehicle with the ISOFIT locking
arms
05
. Your child is then buckled into the child seat using the vehicle's 3-point seat
belt.
1. If your vehicle is not equipped with ISOFIX seat fittings as standard, clamp the
two insertion aids
02
supplied with the seat*, with notch facing upwards, onto
the two ISOFIX fixing points
01
in your vehicle.
TIP! The ISOFIX fixing points are located between the seat surface and the
backrest of the vehicle seat.
* The insertion aids make it easier to install the child seat with ISOFIX fixing points and prevent damage
to the car seat covers. If they are not being used, remove them and keep them in asafe place. For
vehicles with afolding backrest, the insertion aids need to be removed before folding the backrest.
Any problems that occur are usually caused by dirt or external objects on the insertion aids and on
the hook. Remove the dirt or external objects to resolve such problems.
With ISOFIT + BACKREST
8.1
01
02
07
06
05
08
5. On either side of the seat, squeeze the green locking
button
07
and the red release button
06
together. This
ensures that both hooks on the ISOFIT locking arms
05
are open and ready to use.
4. Hold down the ISOFIT setting button
08
and push the
ISOFIT locking arms
05
fully out.
6. Place the child seat facing forward on acar seat ap-
proved for this purpose. Check that the backrest
12
is
flat against the backrest of the car seat.
02 05
08
07
7. Position the two ISOFIT locking arms
05
directly in front
of the two insertion aids
02
.
8. Push both ISOFIT locking arms
05
into the insertion aids
02
until the ISOFIT locking arms
05
engage on both
sides with an audible click.
DANGER! The green locking button
07
must be visi-
ble on both sides, indicating that the child seat is correct-
ly fastened.
9. Hold down the ISOFIT setting button
08
and push the
child seat as far back as possible.
10. Shake the child seat to check that it is securely fastened,
and check the locking buttons
07
again to ensure that
they are both fully green.
11. Carry out the steps in paragraph 8.3 "SECURING THE
CHILD IN A CHILD SEAT WITH BACKREST".
22
19
03
16
10
22
05
02
07
A correctly adjusted headrest
22
ensures optimal positioning of the diagonal
strap
16
, and gives your child optimum protection. The headrest
22
must be
positioned so that two fingers can be inserted between your child's shoulders
the headrest
22
.
To adjust the height of the headrest to fit your child:
2. Push the headrest of the vehicle seat to its top position.
3. Follow the steps in Section 6 “ADJUSTING THE HEADREST”.
1. Press the release button on car vehicle seat buckle.
2. Open the dark red belt holder
03
by pressing the button on
the belt holder
03
backwards, then pull out the diagonal
belt
16
.
Only for installation type A (ISOFIT):
3. To release the ISOFIT fitting, squeeze the green locking
button
07
and red release button
06
together, first on one
side then on the other.
►The child safety seat can now be removed.
REMOVAL:
en-GB_180926_H29_KIDFIXR_KIDFIX S.indd 1 11.10.2018 12:46:27

Chat with your Britax Romer Kidfix 2 S manual using AI

Get instant AI answers from your Britax Romer Kidfix 2 S manual

Ask anything about the Britax Romer Kidfix 2 S. Answers come from this manual, with the pages they are based on.

Kidfix 2 S Maintenance Schedule

Remind me when maintenance is due
Every 5 years
Replace after accident or damage

Replace the seat if involved in an accident over 10 km/h or if damaged.

Before every trip
Check seat installation and belt routing

Verify ISOFIX locking indicators are green, belts are straight and routed correctly through guides.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Kidfix 2 S?

Yes No

Frequently Asked Questions

A

It is approved for Group II/III children weighing 15 to 36 kg, generally around 4 to 12 years old. Fit should always be based on the child's size, belt position, and the vehicle seating position.

Is this answer helpful?

A

Yes. It can be used with a vehicle's approved three-point belt. ISOFIT is optional and provides a fixed connection to ISOFIX anchor points when the vehicle supports it.

Is this answer helpful?

A

No. The seat must never be used with a two-point vehicle belt. A three-point belt is required to provide correct restraint and belt routing.

Is this answer helpful?

A

Set the headrest so there is about a two-finger space between the child's shoulders and the headrest. The shoulder belt should pass over the collarbone, not the neck, and angle back toward the vehicle anchor.

Is this answer helpful?

A

SecureGuard is the light-red belt-routing section for the lap belt. It helps keep the lap belt low across the child's hips. The shoulder belt must not be placed through SecureGuard.

Is this answer helpful?

A

The backrest may be removed only for children weighing 22 to 36 kg and taller than 125 cm. Keeping the backrest in place as long as possible, preferably until at least 135 cm, is recommended for better side protection.

Is this answer helpful?

A

Remove the cover and wash it at 30 C on a gentle machine cycle with mild detergent, following its care label. Clean plastic parts with soapy water and do not use harsh cleaners or solvents.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Approved for children weighing 15 to 36 kg, covering approximately ages 4 to 12.
  • Offers ISOFIT attachment or three-point belt installation for broad vehicle compatibility.
  • Adjustable headrest and color-coded belt guides support correct belt positioning.
  • Kidfix2 S includes SICT side-impact protection on the door-facing side.
  • Can convert into a booster cushion for eligible older and taller children.
VS

Disadvantages

  • A two-point vehicle belt cannot be used with this seat.
  • Booster-only mode offers less side-impact protection than use with the backrest.
  • ISOFIT use is limited to vehicles with compatible ISOFIX anchor points.
  • Correct belt routing requires checks before every journey.
  • The seat should be replaced after a collision exceeding 10 km/h, even if damage is not visible.
M: gpt-5.6-terra

Product Specification

Group

2/3

Weight class

33.07-79.37 lb

Age group

3.5-12 years

Color

black

Belt system

three-point seat belt

Installation

forward-facing

ISOFIX

yes

Features

adjustable backrest, height-adjustable headrest, side-impact protection, removable/washable cover, installation indicators

Dimensions (W x H x D)

21.26 x 26.38-33.46 x 15.35 in

Weight

15.87 lb

M: gpt-5.6-terra

Product Description

Britax Romer Kidfix2 S Cosmos Black 2018/2019 Manual

The Britax Romer Kidfix2 S cosmos black 2018/2019 Manual highlights a versatile high-back booster designed to support children through their later car-seat years. Suitable for Group II/III use, the seat is approved under ECE R44/04 for children weighing 15 to 36 kg, approximately ages 4 to 12. Its Cosmos Black finish gives the seat a clean, understated look that can suit many vehicle interiors.

Flexible installation for everyday travel

The Kidfix2 S can be used forward-facing with a vehicle three-point belt, either on its own or together with the ISOFIT connectors. ISOFIT attaches the seat to compatible ISOFIX anchor points, helping keep it stable when the child is not seated. Clear green indicators confirm that both connectors are properly engaged. The seat can also be installed using only the vehicle's three-point belt in approved seating positions.

A close fit against the vehicle seat back is important for correct positioning. Before every journey, parents should check that the seat is secure, the belt is not twisted, and the buckle is not resting inside a belt guide. The design is not suitable for use with a two-point belt.

Belt guidance and side-impact features

Color-coded guides help distinguish the belt paths. The lap belt runs through the light-red guides and the SecureGuard section, while the shoulder belt passes through the dark-red headrest guide. SecureGuard is designed to help keep the lap belt positioned low across the child's hips. For the Kidfix2 S version, the adjustable SICT side-impact element is positioned on the side nearest the vehicle door, leaving a small clearance from the door.

The height-adjustable headrest supports a better shoulder-belt route as a child grows. It should be set so there is roughly a two-finger gap between the child's shoulders and the headrest. The shoulder belt should cross the collarbone rather than touch the neck, then travel diagonally back toward the vehicle belt anchor.

Optional booster configuration

For older children, the backrest can be removed to create a booster cushion. This option is limited to children from 22 to 36 kg who are taller than 125 cm. Britax Romer recommends retaining the backrest for as long as possible, ideally until at least 135 cm, because it provides additional side-impact support. Without the backrest, use depends on correct shoulder-belt placement and suitable vehicle side protection. A flexible belt guide can help bring the belt into the required position.

Care and practical notes

The removable cover can be machine-washed at 30 C on a gentle cycle using mild detergent. Plastic parts can be cleaned with soapy water. Use original replacement covers only, avoid solvents or oils, and replace the seat after a significant collision or if it is damaged.

Note: Never leave a child unattended in the vehicle, and always secure the seat even when it is empty.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly