Manual.ly Logo

Britax Romer Kid II Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
49490d49a42bdc5b9972ef04a37f40e64cb7 page 1
Belt guide (bright red)
01
Headrest
Seat cushion
Belt holder
Compartment for user manual
02
03
04
05
Backrest
Headrest adjustment handle
06
07
03
06
07
01
02
04
05
2. INTRODUCTION
Thank you for choosing
KID II
to keep your child safe through a new stage of
their life.
In order to protect your child correctly, the
KID II
must always be used
and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact
us:
BRITAX RÖMER
Kindersicherheit GmbH
Blaubeurer Straße 71
D-89077 Ulm
Germany
T.: +49 (0) 731 9345-199/-299
F.: +49 (0) 731 9345-210
www.britax.eu
BRITAX EXCELSIOR
LIMITED
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
E.:
www.britax.eu
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
18
17
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
agonal seat belt
18
in dark red and the lap belt
17
in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle. The seat can be used in vehicles with a 3-point belt.
Please nd the information on the seats approved for child safety seats of the weight classes 15
to 36 kg in the operating instructions of your vehicle.
The KID II is approved for one method of installation:
Symbol Installation type Approval type
with the vehicle's 3-point seatbelt
universal
You can use your child safety seat as follows:
In the direction of travel yes
against the direction of travel no
1)
with 2-point belt no
with 3-point belt
2)
yes
on front passenger seat yes
3)
on outer rear seat yes
on centre rear seat (with
3-point belt)
yes
4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only if the
vehicle seat is also approved for use by adults. The seat may not be in the area of effect of
an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15–36 kg
3. Certification
BRITAX RÖMER
Child safety seat
Testing and certication
In accordance with ECE* R 44/04
Group Body weight
KID II
II+III 15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certied according
to the requirements of the European Standard for Child Safety Equipment
(ECE R 44/03). The seal of approval E (in a circle) and the approval number
are located on the orange approval label (sticker on the child safety seat).
DANGER! This approval will be invalidated if you make any modica-
tions to the child safety seat. Only the manufacturer is permit-
ted to make modications to the child safety seat.
WARNING! Use the
KID II
exclusively for securing your child in your
vehicle. It is in no way suitable as a seat or toy in the home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
PAGE I
6. DISASSEMBLY AND DISPOSAL
1. PRODUCT OVERVIEW
1. Operate the release button of your vehicle seat
buckle.
2. Pull out the diagonal belt
18
from the dark red belt
holder
02
on the headrest
05
.
The child safety seat can now be removed.
DANGER! the child safety seat must always be
secured when it is in the vehicle, even if no child is
being transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the corre-
sponding container
Metal parts Container for metals
Belt straps Container for polyester
buckle and tongue Residual waste
REMOVAL:
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
Removing the seat cover
1.
Moving the headrest of the vehicle seat into the top
position.
2. Unhook the cover hooks
20
on the rear of the back-
rest
07
.
3. Remove the upper part of the cover.
4. Unhook the cover loops
21
at the bottom on the rear
of the backrest
07
5. Pull off the cover from the seat cushion
03
.
Removing the headrest cover
6.
Unhook the cover loops
21
on the back of the head-
rest
05
.
7. Unhook the cover hooks
20
on the front of the back-
rest
07
.
8.
Pull off the cover of the headrest
05
.
► The cover can now be washed.
Please observe the
instructions on the washing label of the cover:
Re-tting the cover
Proceed in reverse order to put on the cover.
5. CARE AND MAINTENANCE
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulls
important functions to ensure the smooth operation of the system. Replacement
seat covers are available from your dealer or from an ADAC ofce.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover.
• The plastic parts can be cleaned using soapy water. Do not use any caustic
cleaning agents (such as solvents).
DANGER! The child seat must not be used without the seat cover.
20
05
20
21
21
19
18
02
05
15 to 36 kg
(~4 to 12 years of age)
www.britax.eu
2000010059 14/12
GB
User instructions
KID II
141210_KID_II_GB.indd 1 10.12.2014 11:00:17

Chat with your Britax Romer Kid II manual using AI

Get instant AI answers from your Britax Romer Kid II manual

Ask anything about the Britax Romer Kid II. Answers come from this manual, with the pages they are based on.

Kid II Maintenance Schedule

After every accident or drop
Replace seat if damaged

If the seat is involved in an accident over 10 km/h or has fallen, it must be replaced.

Regularly
Inspect for damage

Check all important parts regularly to ensure mechanical components function perfectly.

Before each trip
Verify installation and harness

Ensure the seat is secured and the harness runs correctly through guides without twists.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Kid II?

Yes No

Frequently Asked Questions

A

The Britax Römer Kid II is designed for children weighing between 15 and 36 kilograms, which typically corresponds to ages 4 to 12 years.

Is this answer helpful?

A

No, you must never use the Kid II with a two-point seat belt. It requires a three-point belt system to ensure proper safety and protection during travel.

Is this answer helpful?

A

You can remove the cover and wash it in a washing machine using a mild detergent on a delicate cycle at 30 degrees Celsius. Always check the care label first.

Is this answer helpful?

A

Yes, the manual states that if there is an accident with a speed over 10 km/h, the seat should be replaced even if no damage is visible to ensure continued safety.

Is this answer helpful?

A

Yes, the headrest has a simple adjustment mechanism. You pull the handle, slide the headrest to the desired height, and release it to lock it in place.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Meets strict ECE R 44/04 safety standards for high reliability
  • Color-coded belt guides simplify correct installation for parents
  • Adjustable headrest accommodates growing children from 15 to 36 kg
  • Removable fabric cover is machine washable for easy hygiene maintenance
VS

Disadvantages

  • Requires a vehicle with a three-point seat belt system only
  • Must be replaced immediately after any collision regardless of appearance
  • Original replacement covers are mandatory to keep safety certification valid
  • Not suitable for use on front seats with active airbags without caution
M: QW-35-FL

Product Specification

Group

2/3

Weight Class

15-36kg

Age Group

4-12Y

Color

black

Harness Type

3-point safety belt

Installation

forward-facing

Isofix

no

Features

adjustable backrest, height-adjustable headrest and shoulder straps, side impact protection, recline position, removable cover

Dimensions (WxDxH)

20.1x26.4-33.5x15in

Weight

11.24lbs

M: QW-35-FL

Product Description

Britax Römer Kid II Cosmos Black: Safe and Comfortable Travel for Growing Children

The Britax Römer Kid II cosmos black (2016/2017) stands as a reliable companion for parents seeking safety and style for their children during car journeys. Designed for children weighing between 15 and 36 kg, this booster seat ensures that young passengers are securely protected using the vehicle's standard three-point seat belt system. The sleek cosmos black finish not only adds a modern aesthetic to your vehicle interior but also hides dirt well, making it a practical choice for daily use.

Safety is at the core of the Kid II design. It adheres strictly to the ECE R 44/04 European safety standards, providing peace of mind for guardians. The seat features a unique color-coded guide system where the diagonal belt is marked in dark red and the lap belt in light red. This visual aid helps parents ensure the belts are routed correctly through the designated guides on the seat, minimizing the risk of improper installation. The adjustable headrest is another critical feature, allowing parents to raise or lower it to match the child's height, ensuring the shoulder belt rests comfortably across the collarbone rather than the neck.

Maintenance is straightforward with the Kid II. The fabric cover can be easily removed and washed in a machine at 30 degrees Celsius, keeping the seat fresh and hygienic. However, it is vital to use only original Britax Römer replacement covers to maintain the structural integrity and safety certifications of the product. The seat does not require complex installation tools; it simply sits on the vehicle seat and is secured by the car's existing belt. Parents must remember never to leave the child unattended in the car and to check regularly for any signs of wear or damage after accidents.

This booster seat is versatile enough for use on various rear seats, provided they have a three-point belt. It is crucial to avoid using two-point belts as they do not offer sufficient protection. With its robust construction and thoughtful design details, the Britax Römer Kid II remains a top choice for families prioritizing safety without compromising on comfort.

Important Notes

  • Always replace the seat after an accident, even if no damage is visible.
  • Do not allow thick clothing under the belt as it reduces protection.
  • Ensure the seat is always secured in the vehicle, even when empty.
M: QW-35-FL

© Copyright 2026 Manual.ly