Manual.ly Logo

Britax Romer Dualfix M i-Size Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-54-NAN
page

/ 2

Loading...
793ba662282eb3f291782fb3de1177c61cb6 page 2
6. SAFETY NOTES
Please take the time to read these instructions carefully and keep them
to hand in the intended operating instructions compartment
17
on the
child safety seat at all times. The instructions must be kept with the child
safety seat if the latter is passed on to a third party.
In order for the DUALFIX M i-SIZE to protect your child correctly, it must
always be installed and used exactly as described in these instructions. It
is possible that some of the child safety seat settings will lead to restric-
tions when used in "i-Size" vehicle seat positions.
DANGER! For the protection of your child:
• In the event of an accident with a collision speed of more than 10km/h, the
child safety seat may be damaged without the damage becoming immediately
visible. In this case the child safety seat must be replaced. Please dispose of
it properly.
• As a rule, have your child safety seat checked if it has been damaged (e.g. if it
falls on the ground).
• Regularly check all important parts for damage. Ensure that all mechanical
parts, in particular, are fully functional.
• Never lubricate or oil parts of the child safety seat.
•
Never leave your child unattended in the child safety seat in the vehicle.
• Only allow your child to enter and exit the vehicle on the pavement side.
• Protect the child safety seat from intensive direct sunlight when it is not in use.
The child safety seat can get very hot in direct sunshine. Children's skin is
sensitive and could be harmed as a result.
•
The more snugly the belt fi ts over your child's body, the better they will be pro-
tected. Therefore, avoid putting thick clothes on your child under the belt.
• Take regular breaks on long journeys in order to give your child the opportu-
nity to run about and play.
• Use on the rear seat: Move the front seat far enough forwards to ensure that
your child's feet cannot hit the backrest of the front seat (to prevent the risk of
injury).
DANGER! For the protection of all vehicle occupants:
In the case of an emergency stop or an accident, unsecured persons or objects
may cause injury to other vehicle occupants. Please always check that ...
• no other load-bearing contact points are used other than those specifi ed in
these instructions and marked out on the child safety seat.
• the backrests of the vehicle seats are locked (e.g. that a folding rear seat
bench latch is engaged).
• all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are
secured.
• all persons in the vehicle have their seatbelts fastened.
• the child safety seat is always secured when it is in the vehicle, even if no child
is being transported.
WARNING! For your protection when handling the child seat:
• Never use the child safety seat free-standing, not even for test sitting.
•
To avoid damage, ensure that the child safety seat is not jammed in between
hard objects (vehicle door, seat rails, etc.).
•
Keep the child safety seat in a safe place when it is not in use. Do not place any
heavy objects on the seat and do not store it directly next to sources of heat or
in direct sunlight.
CAUTION! For the protection of your vehicle:
• Certain vehicle seat covers made from more sensitive materials (e.g. velour,
leather) may sustain signs of wear and tear when using child safety seats. For
optimum protection of your vehicle seat covers, we recommend using the
BRITAX RÖMER vehicle seat protector from our range of accessories.
PAGE II
1. If your vehicle is not fi tted with ISOFIX insertion aids as standard, clamp
the two insertion aids
02
, which are included in the scope of delivery of
the seat*, with the opening pointing upwards, to the two ISOFIX fastening
points
01
of your vehicle.
TIP! The ISOFIX fastening points are located between the surface and the
backrest of the vehicle seat.
2. Move the headrest of the vehicle seat into the top position.
* The insertion aids facilitate the installation of the child safety seat with the use of the
ISOFIX fastening points and prevent damage to the vehicle seat covers. As long as they
are not used, remove them and keep them in a safe place. For vehicles with a folding
backrest, the insertion aids need to be removed before folding the backrest. Any prob-
lems occurring usually come from soiling or external objects on the insertion aids and
on the hook. Remove soiling or external objects to rectify such problems.
7. PREPARATORY WORK
8. INSTALLATION OF THE CHILD SAFETY
SEAT
1. ADJUSTING THE SHOCK BAR
1.1 Place the child safety seat facing backwards
(in the direction of travel) on a vehicle seat
which has been approved for use.
1.2 Press the adjustment handle
14
on the shock
bar
10
down with one hand and use the other
hand to pull the shock bar
10
up at the same
time, until it unlocks.
1.3 Adjust the angle of the shock bar
10
to the
angle of your vehicle seat backrest so the
shock bar
10
engages with a clicking sound.
10. USING THE CHILD SAFETY SEAT
2. PREPARING THE ISOFIX
2.1 Pull the grey fabric loop
15
until the ISOFIX
locking arms
16
are fully extended.
2.2 Push the green safety button
06
and the red
release button
05
on both sides of the seat
towards each other. This ensures that both
hooks on the ISOFIX locking arms
16
are
open and ready to use.
3. FASTENING THE ISOFIX
3.1 Position the two ISOFIX locking arms
16
directly in front of the two insertion aids
02
.
3.2 Push both ISOFIX locking arms
16
into the
insertion aids
02
until the ISOFIX locking
arms
16
engage on both sides with a clicking
sound.
DANGER! The green safety button
06
must be visible on both sides so that the child
safety seat is correctly fastened.
4. PUSHING THE CHILD SAFETY SEAT ON
SECURELY
Push the child safety seat as far as possible
towards the vehicle seat backrest.
5. CHECKING THE FASTENING
Shake the child safety seat to ensure that it is
securely fastened and check the safety buttons
06
to make sure that the two indicators are fully
green.
6. INSTALLING THE SUPPORT LEG
6.1 Pull the support leg
21
away from the back of
the child safety seat until you hear a click and
the support leg
21
is fully extended. The red
marking must not be visible any more.
6.2 Push both adjustment buttons
22
and pull
out the support leg
21
until it rests fi rmly on
the fl oor of the vehicle. The indicator on the
support leg
21
must be fully green and the
two adjustment buttons
22
must engage with
a clicking sound.
DANGER! The support leg
21
must never
be suspended in mid-air or supported by
other objects. Make sure that the support leg
21
does not lift the DUALFIX M i-SIZE bottom
section
19
up from the surface of the vehicle
seat.
1. LOOSENING THE SHOULDER STRAPS
To loosen the shoulder straps, press the strap
adjustment button
11
and, at the same time, pull
both shoulder straps
09
forwards.
CAUTION! Do not pull the shoulder pads
08
.
2. OPENING THE HARNESS BUCKLE
To open the harness buckle
04
, press the red
button on the harness buckle.
5. ADJUSTING THE HEADREST
A correctly adjusted headrest
03
ensures optimum
protection for your child in the child safety seat:
The headrest
03
must be adjusted so that the
shoulder straps
09
are at the same level as your
child’s shoulders or slightly higher.
To adjust the headrest:
5.1 Loosen the harness (8.1).
5.2 Hold the release button
07
on the headrest
03
down and slide the headrest
03
until it is
at the correct shoulder strap height.
5.3 Check that the headrest
03
is properly en-
gaged by sliding the headrest
03
down a little.
3. POSITIONING A CHILD IN THE SEAT
Place your child in the child safety seat.
Make sure that the harness buckle
04
is folded
forwards and place your child in the child safety
seat.
DANGER! Only use the child safety seat fac-
ing backwards on the passenger seat if the front
airbag has been deactivated.
4. FITTING THE SHOULDER STRAPS
Lay the shoulder straps
09
over your child's
shoulders.
CAUTION! The shoulder straps
09
must not
be twisted or have their places changed over.
6. CLOSING THE HARNESS BUCKLE
Push the two buckle tongues
29
together and
push them into the harness buckle
04
until they
engage with a clicking sound.
7. TENSIONING THE ADJUSTMENT STRAP
Pull the adjustment strap
12
until the strap lies fl at
and snug on your child’s body.
WARNING!
The hip belt must lie as low as pos-
sible over your child's hips.
1. Press the two adjustment buttons
22
on the support leg and push the bot-
tom part of the support leg into the top part until it is fully inserted. Release
the adjustment buttons to fi x the support leg in the inserted position.
2. Loosen the ISOFIX fastening on both sides by pressing the green safety
button
06
and the red release button
05
towards each other.
3. Move the ISOFIX locking arms
16
back into the seat shell
18
.
TIP! The ISOFIX locking arms are protected against damage once they
are pushed back into the seat bottom.
DANGER! The child safety seat must always be secured when it is in the
vehicle, even if no child is being transported.
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, waste incineration
Plastic parts To be placed in the corresponding
container according to labelling
Metal parts Container for metals
Belt straps Container for polyester
Buckle and tongue Residual waste
11. ADJUSTING THE SEAT ANGLE
The seat shell of the
DUALFIX M i-SIZE
can be used in six di erent reclined
positions facing either forwards or backwards:
To adjust the seat angle:
Pull the adjustment handle
13
forwards and push/
slide the seat shell
18
into the desired position.
DANGER! The seat shell
18
must engage
securely with a clicking sound regardless of its posi-
tion. Pull up on the seat shell
18
to ensure that it is
engaged.
►The shoulder straps
09
must be adjusted so that
they run horizontally or just above your child’s
shoulders.
►The shoulder straps
09
are not allowed to run
behind your child’s back, or level with/above their
ears.
Before each car journey, in order to ensure your child’s safety,
make sure that ...
• the child safety seat is fastened in the ISOFIX fastening points
01
on both
sides with the ISOFIX locking arms
16
and both ISOFIX indicators
06
are
fully green;
• the child safety seat is securely fastened;
13. DISPOSAL
12. REMOVING THE CHILD SAFETY SEAT
02
01
The DUALFIX M i-SIZE can be used:
1. From 61–105cm (≤ 18kg) facing backwards.
2. From 15 months up: 76–105cm (≤ 18kg) facing forwards.
To change the direction of travel, press the rotation
button
20
and turn the seat to the desired direction
until it engages.
When facing forwards, the cushioning plate
10
must
be in vertical position.
DANGER! Before making any car journey, ensure
that the rotating part of the child safety seat is fully
engaged by trying to rotate the child safety seat in
both directions.
DANGER! Do not use the child safety seat facing
forwards if your child is under 76cm/15months old.
• the support leg
21
is resting fi rmly on the fl oor of the vehicle and the indica-
tor on the support leg
21
is green;
• the rotating seat shell
18
is fully engaged and both indicators are black;
• the harness of the child safety seat is fi tted snugly to the child’s body with-
out being constricting;
• the shoulder straps
09
are correctly adjusted and the straps are not twisted;
• the shoulder pads
08
are in the correct position on your child’s body;
• the front airbag is deactivated if you are using the child safety seat facing
backwards on the passenger seat;
• the child safety seat is facing in the right direction for your child's age/size;
• the buckle tongues
29
are fastened into the harness buckle
04
.
CAUTION! If your child tries to open the ISOFIX release buttons
05
or
the harness buckle
04
, stop immediately as soon as possible. Check
whether the child safety seat is correctly fastened and ensure that your
child is correctly secured. Explain to your child the dangers associated
with their actions.
13
18
20
10
12
9. CHANGING THE DIRECTION OF TRAVEL
03
07
03
09
09
04
04
14
10
15
16
05
06
16
02
06
21
22
22
19
11
09
08
04
29
04

Chat with your Britax Romer Dualfix M i-Size manual using AI

Get instant AI answers from your Britax Romer Dualfix M i-Size manual

Ask anything about the Britax Romer Dualfix M i-Size. Answers come from this manual, with the pages they are based on.

Dualfix M i-Size Maintenance Schedule

Before every use
Check seat locking mechanisms

Ensure locking tongues click audibly and lock securely without resistance.

As needed
Clean harness buckle

Soak buckle in warm soapy water for at least one hour if it sticks or fails to lock.

Regularly
Wash removable cover

Remove cover and wash gently at 30°C using mild detergent following care label instructions.

Regularly
Wash shoulder pads

Remove shoulder pads and wash in lukewarm soapy water.

Regularly
Clean plastic parts and straps

Wipe with soapy water; do not use harsh solvents or cleaners.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Dualfix M i-Size?

Yes No

Frequently Asked Questions

A

It supports rearward-facing use from 61-105 cm (up to 18 kg). Forward-facing use starts from 15 months and covers 76-105 cm (up to 18 kg). Always follow the seat direction rules and ensure the harness is adjusted correctly for your child.

Is this answer helpful?

A

Extend the ISOFIX locking arms, position them in front of the vehicle insertion aids, and push until they engage with a clicking sound. Verify the green safety button is visible on both sides. Also shake the seat lightly and check the indicators are in the correct state before driving.

Is this answer helpful?

A

The support leg stabilizes the child seat by resting firmly on the vehicle floor. Pull it out until you hear a click, then extend it so both the indicator is green and the adjustment buttons engage with a clicking sound. Do not leave the leg suspended or supported by objects.

Is this answer helpful?

A

Set the headrest so the shoulder straps are at the same level as your child's shoulders or slightly higher. Make sure the shoulder straps are not twisted and lie correctly. Before each journey, confirm the harness is snug without constricting and that the buckle is properly closed.

Is this answer helpful?

A

The manual guidance emphasizes cleaning the harness buckle so it functions correctly again. Soak the buckle in warm water with washing-up liquid for at least an hour, rinse thoroughly, and dry it. Reassemble carefully and confirm it works securely. Avoid using the seat if the buckle function is abnormal.

Is this answer helpful?

A

Use authentic BRITAX Romer seat covers. The cover can be washed at 30 C on a delicates cycle. Clean the baby insert the same way after removing foam parts. Shoulder pads can be washed in lukewarm soapy water. For plastic parts and harness, use soapy water only and do not use caustic cleaning agents.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • ISOFIX installation with clicking engagement and safety indicators for easier correct setup.
  • Rotating seat shell helps you place and remove your child while confirming correct lock-in before travel.
  • Support leg extends to the floor with an indicator, helping you maintain stable installation.
  • Harness and headrest adjustment guide supports a secure, snug fit as your child grows.
  • Cleaning instructions help maintain reliable harness buckle function using warm, soapy water.
VS

Disadvantages

  • Forward-facing use requires meeting the minimum size and age guidance (15 months and 76 cm).
  • Rear-facing on passenger seats depends on having the airbag deactivated.
  • Seat angle and orientation settings must be engaged with a click; incorrect engagement is unsafe.
  • The harness buckle may require careful cleaning if contamination affects performance.
  • Some maintenance steps require removing parts and following wash instructions closely.
M: OA-GPT-54-NAN

Product Specification

Group

i-Size

Weight class

max. 39.68 lb

Age class

3M-4Y

Color

blue

Harness technology

Five-point safety harness

Installation

forward/rearward facing

Isofix

yes, incl. Isofix base with support leg

Features

height-adjustable headrest and shoulder straps, side impact protection, adjustable seating position, recline position, removable/washable cover, swivel function, color indicator, extendable leg rest, anti-tip system

Dimensions (WxHxD)

17.32x18.90x29.13in

Weight

33.07 lb

M: GO-GEM-FL-25

Product Description

Britax Romer Dualfix M i-Size moonlight blue 2018/2019

The Britax Romer Dualfix M i-Size in moonlight blue is built for parents who want a car seat that feels secure, simple to use, and adaptable as their child grows. This ISOFIX seat is designed for rearward and forward travel (61-105 cm, up to 18 kg), with a forward-facing stage starting from 15 months. A key comfort feature is the rotating seat shell, which helps you place your child in the safest position with less effort.

Installation and everyday readiness focus on clear feedback. With ISOFIX fastening points, the seat locks with a clicking sound, and indicators confirm correct fastening. The support leg extends to the vehicle floor and uses a color indicator to show it is properly set. Before every journey, the seat shell must be fully engaged, and the indicator colors must match the correct orientation, helping you avoid incorrect setup.

Once installed, the harness and headrest work together for a snug fit. The headrest is adjusted so the shoulder straps sit at the same level as the child's shoulders or slightly above. The harness buckle should click firmly when closed and should only open with the intended release action. For safety, thick clothing under the belt is discouraged, since a tighter belt fit improves protection.

This model also includes practical maintenance guidance to keep performance consistent over time. The seat cover is washable (30 C on a delicates cycle) and the baby insert can be cleaned the same way, while foam parts must be removed before washing. Plastic parts and the harness can be cleaned with soapy water only, and caustic agents are not recommended. If the harness buckle ever shows reduced function, cleaning it is essential, including soaking in warm water with washing-up liquid, rinsing thoroughly, and drying.

Keyword: Britax Romer Dualfix M i-Size moonlight blue 2018/2019 Manual.

Notes

  • Do not lubricate or oil the child safety seat.
  • Never use the seat without the seat cover.
  • For an accident or if damage is suspected, the seat should be checked or replaced.

Key takeaways

  • ISOFIX installation with visible indicator feedback.
  • Rotating seat shell with engagement checks before driving.
  • Support leg must rest firmly on the vehicle floor.
  • Harness setup depends on correct headrest and strap positioning.
  • Simple, safe cleaning helps maintain buckle and harness function.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly