Manual.ly Logo

Britax Romer Dualfix M i-Size Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-54-NAN
page

/ 2

Loading...
793ba662282eb3f291782fb3de1177c61cb6 page 1
5. CARE AND MAINTENANCE
• The buckle tongues
29
no longer engage (i.e. when you try to push them in,
they pop out again).
• The buckle tongues
29
engage without an audible click.
• The buckle tongues
29
are di cult to push in (you feel a certain amount of
resistance).
• The harness buckle
04
only opens if extreme force is applied.
Remedy: Clean the harness buckle
04
so that it functions properly again with no
trouble:
Cleaning the harness buckle
04
29
24
25
24
25
1. Remove the cover from the surface of the seat as described below under
"Removing the cover".
2. Rotate the crotch harness with the metal plate
24
which holds the harness
buckle
04
in the seat shell
18
by 90° in the longitudinal slot.
3. Slide the metal plate
24
through the harness slot
25
with the narrow edge
facing forwards.
4. Soak the harness buckle
04
in warm water containing washing-up liquid for at
least an hour. Rinse the buckle thoroughly and dry it.
5. Slide the metal plate
24
fully into the longitudinal slot from the front.
6. Rotate the crotch harness with the metal plate
24
by 90° until it is hooked
into the harness slot
25
on the seat shell
18
perpendicular to the direction of
motion.
DANGER! Tug hard on the harness buckle
04
to make sure that it is secure in
the seat shell
17
.
7. Thread the harness buckle
04
through the crotch pad
23
on the cover and
then re-fasten the Velcro fastener and the cover.
Removing the cover
17
03
32
33
09
32
04
03
23
1. Put the seat shell
17
into its fl attest position.
2. Loosen the shoulder straps
09
and open the harness buckle
04
.
3. Slide the headrest
03
into the highest position.
4. First unhook the rubber loop
33
at the bottom edge of the headrest
03
, fol-
lowed by the hook
32
at the top edge, and remove the cover.
5. Slide the headrest
03
into the lowest position.
6. Open the press studs at the left and right on the back of the cover and thread
the shoulder straps
09
through the opening.
7. Open the Velcro fastener on the crotch pad
23
.
8. Unhook the rubber loops
33
and the plastic cards from the leg area.
9. Unhook the elastic seam of the cover from the bottom.
10. Pull the cover from the bottom over the adjustment button
13
by the adjust-
ment strap, over the harness buckle
04
and then over the headrest
03
by the
opening
.
DANGER! The child safety seat must not be used without the seat cover.
Reattaching the cover:
Proceed in reverse order to put on the cover.
Caution: The harnesses must not be twisted and must be correctly positioned
in the harness slots.
Removing the shoulder pads
08
18
09
17
08
30
1. Rotate the seat shell
18
so it is facing backwards.
2. Loosen the shoulder straps
09
as far as possible.
3. Open the shoulder pads
08
at the Velcro fasteners at the side.
4. Open the operating instructions compartment
17
.
5. Pull the shoulder straps
09
out a little and unhook the underlying harness loops
on the shoulder pads
08
from the plastic fi ns
30
of the height adjuster.
6. Pull the shoulder pads
08
forwards out of the harness slots.
Reattaching the shoulder pads:
Follow the steps for removing the pads in reverse order.
Caution: The shoulder pads
08
and the harnesses must not be twisted or
have their places changed over. The shoulder straps
09
must be located under
the black cover band in the shoulder pads
08
.
1. Press the rotation button
20
on the side of the
bottom section
19
, rotating the seat shell
18
90°
towards the vehicle door at the same time.
2. Now you can put your child in or take him or her
out easily.
3. Secure your child in the seat (see Section 8. US-
ING THE CHILD SAFETY SEAT).
4. Rotate the seat shell
18
90° again so it is facing
either forwards or backwards, depending on the age
of your child, until it
engages with a clicking sound.
5. Make sure that both indicators
27
are black. If
one of the indicators is red, the seat shell
18
is not
engaged properly.
Caution: Before every journey, make sure that the
rotating seat shell
18
is fully engaged and both
indicators are black.
4. PUTTING THE CHILD IN/TAKING
THE CHILD OUT
Cleaning
Only use authentic BRITAX RÖMER seat covers. The seat cover is an integral part
of the child safety seat and is key to ensuring the trouble-free functionality of the
system. Replacement seat covers are available from your dealer.
• The cover can be removed and washed with a mild detergent on a washing
machine's delicates cycle (30 °C). Please observe the instructions on the wash-
ing label of the cover.
• The baby insert can be washed in the same way as the cover. Remove all foam
parts from the top and bottom sections before washing. These must not be
washed.
• The shoulder pads can be removed and washed in lukewarm soapy water.
• The plastic parts and the harnesses can be cleaned with soapy water. Do not
use any caustic cleaning agents (such as solvents).
Caring for the harness buckle
To ensure the safety of your child, it is absolutely essential that the harness buckle
04
continues to function correctly. Harness buckle
04
malfunctions are usually
caused by a build-up of soiling or by external objects:
• When you press the red release button, it takes a long time for the buckle
tongues
29
to be ejected.
20
18
19
Rotation button
Bottom section of shell
Seat shell
Operating instructions compartment
Shock bar adjustment handle
Tilt adjustment handle
Adjustment strap
Adjustment button
Shock bar
Shoulder straps
Safety button
Release button
Harness buckle
Headrest
ISOFIX insertion aids
Headrest release button
07
06
05
04
03
02
14
13
12
11
10
09
20
19
18
17
Shoulder pads
08
Fabric loop
15
Support leg adjustment buttons
Support leg
22
21
ISOFIX fastening points (vehicle)
01
ISOFIX locking arms
16
06
05
04
03
17
18
19
01 02
07
08
11
13
14
20
09
12
10
15
16
21
22
18
27
27
1. PRODUCT OVERVIEW
2. APPROVAL
These instructions use the following symbols:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP! Useful notes
3. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the
operating instructions of your vehicle. During use, be sure to observe any restric-
tions relating to airbags.
Please refer to the operating instructions for your vehicle for information about
vehicle seats which are certifi ed for the use of children's restraining systems according
to ECE R16.
DUALFIX M i-SIZE usage options:
BRITAX RÖMER
Child safety seat
Vehicle seating position with ISOFIX
i-Size
Not i-Size
DUALFIX M i-SIZE
See type list
You can use your child safety seat as follows:
Facing forwards (in the
direction of travel)
Yes
1)
Facing backwards (against
the direction of travel)
Yes
1)
With 2-point or 3-point
safety harness
No
On seats featuring:
ISOFIX fastenings
Yes
2)
(Please observe the applicable regulations in force in your country)
1)
Facing forwards (in the direction of travel) 76–105 cm/facing backwards (against the direction of
travel) 61–105 cm
2)
Facing forwards (in the direction of travel) 76–105 cm: If there is a passenger airbag: Slide the pas-
senger seat well backwards and follow any relevant directions in your vehicle's operating instructions.
Facing backwards (against the direction of travel) 61–105 cm: Do not use on passenger seats with an
active front airbag!
We are pleased that you have chosen our
DUALFIX M i-SIZE
to accompany your child safely through a new stage of his or her life.
In order to protect your child correctly, the
DUALFIX M i-SIZE
must always be used and installed as described in these instructions.
The
DUALFIX M i-SIZE
is exclusively intended to secure your child in your
vehicle.
BRITAX RÖMER
Child safety seat
Tested and approved according
to ECE* R 129/02
Body size Body weight
DUALFIX M i-SIZE
61–105 cm ≤ 18 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and approved according to
the requirements of the European Standard for Child Safety Equipment (ECE
R 129/02). The seal of approval "E" (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER! This certifi cation will be invalidated if you make any modifi ca-
tions to the child safety seat. Only the manufacturer is permitted
to make modifi cations to the child safety seat. Unauthorised
technical changes can cause the protective function of the
seat to be reduced or completely eliminated. Do not make any
technical changes to the child safety seat.
DANGER! Use the
DUALFIX M i-SIZE
exclusively for securing your child in
your vehicle. It is in no way suitable for use as a seat or toy in
the home.
PAGE I
61–105 cm
≤ 18 kg
76–105 cm
≤ 18 kg
BRITAX RÖMER
Kindersicherheit GmbH
Theodor-Heuss-Straße 9
89340 Leipheim
Germany
T.: +49 (0) 8221 3670-199/-299
F.: +49 (0) 8221 3670 -210
www.britax.com
BRITAX EXCELSIOR
LIMITED
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
E.:
www.britax.com
Contact:
Operating instructions
GB
DUALFIX M i-SIZE
61 - 105 cm
≤ 18 kg
www.britax.com
2000030158 18/02

Chat with your Britax Romer Dualfix M i-Size manual using AI

Get instant AI answers from your Britax Romer Dualfix M i-Size manual

Ask anything about the Britax Romer Dualfix M i-Size. Answers come from this manual, with the pages they are based on.

Dualfix M i-Size Maintenance Schedule

Before every use
Check seat locking mechanisms

Ensure locking tongues click audibly and lock securely without resistance.

As needed
Clean harness buckle

Soak buckle in warm soapy water for at least one hour if it sticks or fails to lock.

Regularly
Wash removable cover

Remove cover and wash gently at 30°C using mild detergent following care label instructions.

Regularly
Wash shoulder pads

Remove shoulder pads and wash in lukewarm soapy water.

Regularly
Clean plastic parts and straps

Wipe with soapy water; do not use harsh solvents or cleaners.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Dualfix M i-Size?

Yes No

Frequently Asked Questions

A

It supports rearward-facing use from 61-105 cm (up to 18 kg). Forward-facing use starts from 15 months and covers 76-105 cm (up to 18 kg). Always follow the seat direction rules and ensure the harness is adjusted correctly for your child.

Is this answer helpful?

A

Extend the ISOFIX locking arms, position them in front of the vehicle insertion aids, and push until they engage with a clicking sound. Verify the green safety button is visible on both sides. Also shake the seat lightly and check the indicators are in the correct state before driving.

Is this answer helpful?

A

The support leg stabilizes the child seat by resting firmly on the vehicle floor. Pull it out until you hear a click, then extend it so both the indicator is green and the adjustment buttons engage with a clicking sound. Do not leave the leg suspended or supported by objects.

Is this answer helpful?

A

Set the headrest so the shoulder straps are at the same level as your child's shoulders or slightly higher. Make sure the shoulder straps are not twisted and lie correctly. Before each journey, confirm the harness is snug without constricting and that the buckle is properly closed.

Is this answer helpful?

A

The manual guidance emphasizes cleaning the harness buckle so it functions correctly again. Soak the buckle in warm water with washing-up liquid for at least an hour, rinse thoroughly, and dry it. Reassemble carefully and confirm it works securely. Avoid using the seat if the buckle function is abnormal.

Is this answer helpful?

A

Use authentic BRITAX Romer seat covers. The cover can be washed at 30 C on a delicates cycle. Clean the baby insert the same way after removing foam parts. Shoulder pads can be washed in lukewarm soapy water. For plastic parts and harness, use soapy water only and do not use caustic cleaning agents.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • ISOFIX installation with clicking engagement and safety indicators for easier correct setup.
  • Rotating seat shell helps you place and remove your child while confirming correct lock-in before travel.
  • Support leg extends to the floor with an indicator, helping you maintain stable installation.
  • Harness and headrest adjustment guide supports a secure, snug fit as your child grows.
  • Cleaning instructions help maintain reliable harness buckle function using warm, soapy water.
VS

Disadvantages

  • Forward-facing use requires meeting the minimum size and age guidance (15 months and 76 cm).
  • Rear-facing on passenger seats depends on having the airbag deactivated.
  • Seat angle and orientation settings must be engaged with a click; incorrect engagement is unsafe.
  • The harness buckle may require careful cleaning if contamination affects performance.
  • Some maintenance steps require removing parts and following wash instructions closely.
M: OA-GPT-54-NAN

Product Specification

Group

i-Size

Weight class

max. 39.68 lb

Age class

3M-4Y

Color

blue

Harness technology

Five-point safety harness

Installation

forward/rearward facing

Isofix

yes, incl. Isofix base with support leg

Features

height-adjustable headrest and shoulder straps, side impact protection, adjustable seating position, recline position, removable/washable cover, swivel function, color indicator, extendable leg rest, anti-tip system

Dimensions (WxHxD)

17.32x18.90x29.13in

Weight

33.07 lb

M: GO-GEM-FL-25

Product Description

Britax Romer Dualfix M i-Size moonlight blue 2018/2019

The Britax Romer Dualfix M i-Size in moonlight blue is built for parents who want a car seat that feels secure, simple to use, and adaptable as their child grows. This ISOFIX seat is designed for rearward and forward travel (61-105 cm, up to 18 kg), with a forward-facing stage starting from 15 months. A key comfort feature is the rotating seat shell, which helps you place your child in the safest position with less effort.

Installation and everyday readiness focus on clear feedback. With ISOFIX fastening points, the seat locks with a clicking sound, and indicators confirm correct fastening. The support leg extends to the vehicle floor and uses a color indicator to show it is properly set. Before every journey, the seat shell must be fully engaged, and the indicator colors must match the correct orientation, helping you avoid incorrect setup.

Once installed, the harness and headrest work together for a snug fit. The headrest is adjusted so the shoulder straps sit at the same level as the child's shoulders or slightly above. The harness buckle should click firmly when closed and should only open with the intended release action. For safety, thick clothing under the belt is discouraged, since a tighter belt fit improves protection.

This model also includes practical maintenance guidance to keep performance consistent over time. The seat cover is washable (30 C on a delicates cycle) and the baby insert can be cleaned the same way, while foam parts must be removed before washing. Plastic parts and the harness can be cleaned with soapy water only, and caustic agents are not recommended. If the harness buckle ever shows reduced function, cleaning it is essential, including soaking in warm water with washing-up liquid, rinsing thoroughly, and drying.

Keyword: Britax Romer Dualfix M i-Size moonlight blue 2018/2019 Manual.

Notes

  • Do not lubricate or oil the child safety seat.
  • Never use the seat without the seat cover.
  • For an accident or if damage is suspected, the seat should be checked or replaced.

Key takeaways

  • ISOFIX installation with visible indicator feedback.
  • Rotating seat shell with engagement checks before driving.
  • Support leg must rest firmly on the vehicle floor.
  • Harness setup depends on correct headrest and strap positioning.
  • Simple, safe cleaning helps maintain buckle and harness function.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly