Manual.ly Logo

Britax Romer Baby-Safe 2 i-Size Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: gpt-5.6-terra
page

/ 2

Loading...
8a69788f9f0032810bfb5e0d83978d7e8234 page 1
USE IN THE VEHICLE
4.
09
10
Shoulder pad
Harness buckle
Handle
Belt guides
Buttons
Headrest
Shoulder straps
01
02
03
04
06
07
08
Belt holder
Belt slots
Belt end
09
11
12
Adapter
13
Sunshade hook
14
Removing the seat cover
1. Remove the sunshade (see chapter 8.5).
2. Open the harness buckle
08
(press the red release
button).
3.
Release the fasteners on the shoulder pads
06
.
4. Pull the part of the headrest cover under the shoulder
straps
07
upwards .
5.
Pull the cover upwards o the headrest
01
.
6. Unhook the plastic strips from underneath the edge of
the infant carrier on all sides.
7. Pull the belt end
09
out of the cover.
8. Remove the cover.
► The cover can now be washed.
Please observe the instruc-
tions on the washing label of the cover.
Remove the back of the new born insert before washing ,
this must not be washed:
08
CARE AND MAINTENANCE
5.
Buckle tongues
05
Instruction compartment
10
14
13
06
04
0501
02
03
07
08
11
12
01
07
06
09
16
17
12
03
18
17
26
1. Rotate the SICT
26
all the way back in a clockwise
direction.
2. Unhook the diagonal strap
16
from the light blue belt
holder
12
.
3. Open the vehicle seat buckle
18
and take the lap belt
section
17
out of the dark blue belt guides
03
.
►The infant carrier can now be removed.
DANGER! The infant carrier must always be se-
cured when it is in the vehicle, even if no child is being
transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging Container for cardboard boxes
Seat cover Residual waste, thermal utilisation
Plastic parts According to the labelling in the
corresponding container
Metal parts Container for metals
Belt straps Container for polyester
Buckle and tongue Residual waste
REMOVAL:
Removing and cleaning the harness buckle
1. Tip the infant carrier backwards.
2. Push the metal plate
30
, with which the harness buckle
is fixed to the seat shell, on its side upwards through the
belt slot
31
.
3. Soak the buckle
08
in warm water with dishwashing
liquid for at least an hour. Rinse and dry thoroughly.
Fitting the harness buckle:
1.
Push the metal plate
30
on its side downwards through
the belt slot
31
in the cover and through the seat shell.
Pay attention to the direction.
2. Check for correct fitting by pulling firmly on the harness
buckle
08
.
Re-fitting the cover
Proceed in reverse order to re-fit the cover.
08
30
31
We are pleased that our
BABY-SAFE i-SIZE
may accompany your child safely
through the first months of his or her life.
In order to protect your child correctly, the
BABY-SAFE i-SIZE
must
always be used and installed as described in these user instructions.
Please read the user instructions carefully before you use the
BA-
BY-SAFE i-SIZE
for the first time, and keep these instructions in the
space provided on the infant carrier.
If you have any further questions regarding the use of the carrier, please feel
free to contact us:
These instructions use the following symbols stated below:
Symbol Keyword Explanation
DANGER! Risk of severe personal injury
WARNING! Risk of minor personal injury
CAUTION! Risk of material damage
TIP: Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
16
17
Belt guide colours
For better dierentiation, the two vehicle seat
belts are highlighted in dierent colours. The
diagonal strap
16
in light blue and the lap belt
17
in dark blue. The colours of the belt guides
on the child safety seat follow the same colour
scheme.
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle.
Please refer to the operating instructions for your vehicle for information about vehicle
seats which are certified for the use of children's restraining systems according to ECE R16.
Usage options for the
BABY-SAFE i-SIZE:
BRITAX RÖMER
child safety seat
Vehicle seating position
i-Size
Not i-Size
BABY-SAFE i-SIZE
You can also use the BABY-SAFE i-SIZE / BABY-SAFE i-SIZE² in combination with the
BABY-SAFE i-SIZE BASE/FLEX BASE (available as an accessory) as an i-Size approved
product. The bases make it easier to fit the seat in and remove it from your vehicle safely. The
BABY-SAFE i-SIZE FLEX BASE also makes it possible to adjust the angle of the infant carrier.
You can use your child safety seat as follows:
In the direction of travel No
Against the direction of travel Yes
With 2-point belt No
With 3-point belt
1)
Yes
On front passenger seat Yes
2)
On outer rear seat Yes
On centre rear seat
(with3-point belt)
Yes
3)
1) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
2) The front airbag must be deactivated. Observe the instructions in the vehicle owner's manual.
3) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
The
BABY-SAFE i-SIZE
is exclusively intended to secure your baby in your
vehicle.
BRITAX RÖMER
child safety seat
Tested and certified
according to ECE* R 129/00
Body size Body weight
BABY-SAFE i-SIZE
40 - 83 cm ≤ 13 kg
*ECE = European Standard for Child Safety Equipment
The infant carrier has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment (ECE
R129/00). The seal of approval "E" (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER! The infant carrier must not be used with any base stations
other than those listed in chapter "4. USE IN THE VEHICLE".
DANGER! This certification will be invalidated if you make any modi-
fications to the child safety seat. Only the manufacturer is
permitted to make modifications to the child safety seat.
Unauthorised technical changes can cause the protective
function of the seat to be reduced or completely eliminated.
Do not make any technical changes to the infant carrier.
WARNING! Use the
BABY-SAFE i-SIZE
exclusively for securing your
child in your vehicle. It must never be used as a seat or toy
inthe home.
DANGER! Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
PAGE I
Please ensure that you only use the original BRITAX RÖMER replacement seat cov-
ers, as the seat cover is an integral part of the child safety seat and fulfils important
functions to ensure the smooth operation of the system. Replacement seat covers
are available from your dealer.
• The plastic parts can be cleaned using soapy water. Do not use harsh cleaning
agents (such as solvents).
DANGER! The infant carrier must not be used without the seat cover.
User instructions
www.britax.com
2000029669 11/17
GB
≤ 13 kg
40 cm - 83 cm
DISASSEMBLY/DISPOSAL
6.
INTRODUCTION
2.
CERTIFCATION
3.
PRODUCT OVERVIEW
1.
Britax Childcare
Britax Römer
Kindersicherheit GmbH
Theodor-Heuss-Straße 9
D-89340 Leipheim
Germany
T.: +49 (0) 8221 3670-199/-299
F.: +49 (0) 8221 3670-210
www.britax.com
Britax Childcare
Britax Exelsior Limited
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
www.britax.com
40 - 83 cm
≤ 13 kg
BABY-SAFE i-SIZE
BABY-SAFE² i-SIZE

Chat with your Britax Romer Baby-Safe 2 i-Size manual using AI

Get instant AI answers from your Britax Romer Baby-Safe 2 i-Size manual

Ask anything about the Britax Romer Baby-Safe 2 i-Size. Answers come from this manual, with the pages they are based on.

Baby-Safe 2 i-Size Maintenance Schedule

After every accident
Replace car seat after crash

If the car seat is involved in an accident with impact speed over 10 km/h, it must be replaced even if damage is not visible.

After drop or damage
Inspect for damage

Have the car seat checked if it has been damaged or dropped to the ground.

Regularly
Check mechanical parts

Regularly inspect all important parts for damage and ensure mechanical components function perfectly.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Baby-Safe 2 i-Size?

Yes No

Frequently Asked Questions

A

It is designed for babies measuring 40 to 83 cm, with a maximum weight of 13 kg. The headrest and shoulder harness should be adjusted as your baby grows.

Is this answer helpful?

A

Yes. It can be installed rearward-facing using an approved three-point vehicle belt. The lap belt goes through the dark blue guides and the diagonal belt goes through the light blue holder.

Is this answer helpful?

A

Yes, only if the front airbag is deactivated. Never install the carrier on a passenger seat where an active front airbag could contact it.

Is this answer helpful?

A

Set the headrest so the shoulder harness exits about 25 mm, or two finger widths, below your baby's shoulders. Tighten the harness so it is close to the body without causing discomfort.

Is this answer helpful?

A

It can be used with stroller frames approved for Britax Romer infant carriers. Apply the stroller brake, attach both sides, check for green indicators, and confirm the connection by lifting the carry handle.

Is this answer helpful?

A

Yes. Remove the canopy and cover as instructed, then follow the washing label on the cover. Remove the back section of the infant insert before washing, because it must not be washed.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Rearward-facing design is approved for babies from 40 to 83 cm and up to 13 kg.
  • Color-coded belt routes make three-point vehicle belt installation easier to follow.
  • Adjustable headrest and harness height help maintain a close fit as the child grows.
  • Compatible with approved Britax Romer stroller frames for travel system use.
  • Removable, washable cover and folding sun canopy support everyday convenience.
VS

Disadvantages

  • Requires a suitable three-point vehicle belt when used without a base.
  • Cannot be used with a front passenger airbag that is active.
  • Not intended for prolonged sleeping or resting outside the vehicle.
  • Only approved bases and compatible stroller frames should be used.
  • A seat involved in a significant impact should be replaced, even without visible damage.
M: gpt-5.6-terra

Product Specification

Group

i-Size

Weight class

0-28.7 lb

Age group

0-15 months

Color

black

Harness system

Five-point safety harness

Installation

rear-facing

ISOFIX

yes, compatible with ISOFIX base

Features

height- and tilt-adjustable headrest and shoulder straps, side-impact protection, infant insert (for newborns), removable/washable cover, integrated sun canopy, color indicator, Click&Go adapter, adjustable carry handle, suitable for air travel

Dimensions (W x H x D)

17.32 x 22.83 x 26.38 in

Weight

10.58 lb

M: gpt-5.6-terra

Product Description

Britax Romer Baby-Safe2 i-Size Without Base Cosmos Black 2018 Manual

The Britax Romer Baby-Safe2 i-Size without base in Cosmos Black is an infant car seat designed to support safe, rearward-facing travel from 40 to 83 cm in height, up to 13 kg. This 2018 model combines a compact infant carrier format with practical features for everyday journeys, including a carry handle, adjustable headrest, integrated harness, sun canopy, and compatibility with approved Britax Romer stroller frames.

Safe vehicle installation

The seat is installed rearward-facing with a vehicle's approved three-point belt. Clear color coding helps guide the belt into the correct positions: the lap belt passes through dark blue guides, while the diagonal belt routes through a light blue holder behind the seat. Before every trip, check that the belt is tight, untwisted, and that the vehicle buckle does not sit in or ahead of a belt guide.

For added side-impact support, the SICT element can be extended on the side closest to the vehicle door. The carrier may be used on suitable front or rear seats, but a front passenger airbag must always be deactivated when the seat is fitted in front. Two-point belts are not suitable for installation.

Comfort as your baby grows

An adjustable headrest allows the shoulder harness height to follow your baby's growth. The harness slots should sit about two finger widths, or 25 mm, below the shoulders. For smaller babies, the included infant insert creates a more supportive fit; its foam blocks can be removed as extra space is needed.

The padded harness should lie close to the body without restricting movement, while the lap section should sit low across the groin area. Avoid thick clothing under the harness, as it can reduce the quality of the fit. A folding sun canopy helps shield your baby's head from direct sunlight during travel or stroller use.

Travel system and daily care

The carrier can connect to approved Britax Romer stroller chassis to create a travel system. Confirm that both attachment indicators show green, then lift the carry handle to verify a secure connection. Always apply the stroller brake before attaching or removing the carrier.

The removable cover can be washed according to its care label after the canopy and harness-related sections have been detached correctly. Clean plastic parts with mild soapy water only, and use original replacement covers to preserve the seat's intended function.

Notes

Keep the seat secured in the vehicle even when empty. Replace it after a significant collision or if damage is suspected. Infant carriers are intended for transport, not prolonged resting outside the vehicle.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly