Manual.ly Logo

Bresser Thermo-Hygro Sensor 7-Channel Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
83d091eb10a415c083c31922a3ab13b0f7d7 page 2
Thermo-Hygro-7CH-Sensor
868MHz
Art. Nr.: 7009999
Station
B
Sensor
D
Wait 5s
C
5 sec
NOTE!
Do not disassemble the device. In the event of a defect, plea-
se contact your dealer. The dealer will contact the Service
Centre and can send the device in to be repaired, if neces-
sary.
Use only the recommended batteries. Always replace weak
or empty batteries with a new, complete set of batteries at
full capacity. Do not use batteries from different brands or
with different capacities. The batteries should be removed
from the unit if it has not been used for a long time.
NOTES ON CLEANING
Separate the device from the power supply or remove the
batteries before cleaning.
NOTE!
Only use a dry cloth to clean the exterior of the device. Do
not use any cleaning uid to avoid damaging the electronics.
SCOPE OF DELIVERY
Outdoor sensor, instruction manual, batteries required (not
included): 2 pcs. Batteries (1.5V, type AA)
FEATURES OF THE REMOTE UNIT
A
D
E
C
B
A LED INDICATOR
Flashes when information is being transmitted to the
weather station.
B WALL MOUNT
For mounting the sensor on walls.
C SET THE TRANSMISSION CHANNEL (1-7)
Input channel for the weather station. Set the channel
before inserting the batteries.
D RESET BUTTON
Press to reset all setting if you have selected different
channel.
E BATTERY COMPARTMENT
Unit requires 2 pcs. UM-3 or “AA” 1.5V batteries.
FIRST OPERATION
1. Open the battery compartment cover.
2. Set the desired channel with the switch. If you are using
only one transmitter, please leave the selection at „1“.
3. Insert 2 new UM-3 or „AA“ 1.5V batteries observing
correct polarity.
4. Close the battery compartment cover and set the unit in
the desired location.
Although the outdoor sensor is weatherproof, it should not
be placed in places exposed to direct sunlight, rain or snow.
TIPS FOR SETTING UP:
Please follow the instructions below to ensure optimum
operation of the equipment:
1. Assign each external transmitter unit its own channel.
2. Place the receiver unit and transmitter unit within 1
meter of each other and activate the manual search for
available signals from all connected outdoor sensors
on the main unit (weather station not included with
delivery).
DISPOSAL
Dispose of the packaging materials properly, accor-
ding to their type, such as paper or cardboard. Contact
your local waste-disposal service or environmental
authority for information on the proper disposal.
Do not dispose of electronic devices in the household
garbage! As per the Directive 2002/96/EC of the Euro-
pean Parliament on waste electrical and electronic
equipment and its adaptation into German law, used
electronic devices must be collected separately and recycled in
an environmentally friendly manner.
In accordance with the regulations concerning batteries
and rechargeable batteries, disposing of them in the
normal household waste is explicitly forbidden. Please
make sure to dispose of your used batteries as required
by law — at a local collection point or in the retail market. Disposal
in domestic waste violates the Battery Directive.
Batteries that contain toxins are marked with a sign and a che-
mical symbol.
Cd¹ Hg² Pb³
1
battery contains cadmium
2
battery contains mercury
3
battery contains lead
EC DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the equipment
type with part number: 7009999 is in compliance
with Directive: 2014/53/EU. The full text of
the EU declaration of conformity is available at the
following internet address:
www.bresser.de/download/7009999/CE/7009999_CE.pdf
TECHNICAL DATA:
Measurement
Temperature range: -40-60 °C (-40-140 °F)
Temperature steps: 0.1 °C/°F
Humidity range: 20-95% RH
Humidity steps: 1%
Transmission
Transmission frequency: 868 MHz
Maximum transmission power < 25mW
Transmission range: 100 meters (free eld)
Power supply
2x AA 1.5V batteries (not included)
EN
Instruction Manual
General Warning
DANGER!
This device contains electronic components which operate
via a power source (power supply and/or batteries). Do not
let children use the device while unattended. Only use the
device as described in the manual, otherwise you run the risk
of an electric shock.
Children should only use the device under adult supervision.
Keep packaging material, like plastic bags and rubber bands,
out of the reach of children, as they pose a choking hazard.
Keep batteries out of the reach of children. Make sure you
insert the batteries correctly. Empty or damaged batteries
could cause burns if they come into contact with the skin. If
necessary, wear adequate gloves for protection.
DANGER!
Do not expose the device to high temperatures. Use only
the recommended batteries. Do not short-circuit the device
or batteries, or throw them into a re. Excessive heat or
improper handling could trigger a short-circuit, a re or an
explosion!
Bresser GmbH
Gutenbergstr. 2
DE-46414 Rhede
Germany
Service:
Web: www.bresser.de/weather
E-Mail: service@bresser.de
Besuchen Sie uns auf • Find us on:
Manual_7009999_Thermo-Hygro-7CH-Sensor_de-en_BRESSER_v032019a
www.bresser.de/P7009999
MANUAL DOWNLOAD:

Chat with your Bresser Thermo-Hygro Sensor 7-Channel manual using AI

Get instant AI answers from your Bresser Thermo-Hygro Sensor 7-Channel manual

Ask anything about the Bresser Thermo-Hygro Sensor 7-Channel. Answers come from this manual, with the pages they are based on.

Thermo-Hygro Sensor 7-Channel Maintenance Schedule

When not in use for a long time
Remove batteries if unused for a long time

The manual states that batteries should be removed from the unit if it has not been used for a long time to prevent damage.

Before cleaning
Clean exterior with dry cloth only

Separate the device from power or remove batteries before cleaning. Only use a dry cloth to clean the exterior; do not use cleaning fluid.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Thermo-Hygro Sensor 7-Channel?

Yes No

Frequently Asked Questions

A

The sensor has a maximum transmission range of 100 meters when used in an open field environment without obstacles.

Is this answer helpful?

A

The unit requires two AA (UM-3) 1.5V batteries. Please note that these are not included in the delivery scope.

Is this answer helpful?

A

No, you should never mix batteries of different brands, types, or capacities. Always replace them with a full set of new, identical batteries.

Is this answer helpful?

A

Yes, the sensor is weatherproof, but it should not be placed where it receives direct sunlight, rain, or snow for optimal longevity.

Is this answer helpful?

A

The LED indicator flashes to confirm that information is being successfully transmitted from the sensor to the weather station.

Is this answer helpful?

A

Press the reset button labeled [RESET] to return the device to factory settings or after changing the transmission channel.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports 7 independent channels for multi-sensor setups
  • Long transmission range of up to 100 meters in free field
  • High precision temperature measurement with 0.1 degree steps
  • Wide operating temperature range from -40 to 60 degrees Celsius
  • Simple channel selection switch for easy configuration
VS

Disadvantages

  • Batteries are not included in the package
  • Requires manual search activation for signal connection
  • Cannot be exposed to direct sunlight or heavy precipitation
  • Limited to specific AA battery types for operation
  • No built-in display requires a separate weather station
M: QW-35-FL

Product Specification

Type

Sensor

Standard

Radio Bus (868MHz)

Function

Temperature, Humidity

Dimensions

2.36x1.46x4.45in

Features

Battery operated (2x AA)

M: QW-35-FL

Product Description

Enhance Your Home Monitoring with the Bresser Thermo-/Hygro-Sensor

The Bresser Thermo-/Hygro-Sensor 7-Channel is a sophisticated outdoor device designed to provide precise environmental data for your weather station. This Temperature/Humidity Sensor operates on an 868 MHz frequency, ensuring reliable transmission of readings over distances up to 100 meters in open fields. Whether you are a gardening enthusiast or a meteorology hobbyist, this sensor offers the accuracy needed to track local climate conditions effectively.

Constructed with durability in mind, the unit features a weatherproof casing suitable for outdoor installation. However, optimal performance requires careful placement away from direct sunlight, heavy rain, or snow accumulation. The device supports seven distinct channels, allowing users to connect multiple sensors to a single receiving unit without signal interference. Each channel can be easily selected via a switch located inside the battery compartment before power is applied.

Powering the sensor is straightforward, requiring two standard AA batteries. An LED indicator provides visual feedback, flashing whenever data is successfully transmitted to the main station. For maintenance, the device should only be cleaned with a dry cloth to protect internal electronics. Safety warnings emphasize keeping batteries out of reach of children and avoiding exposure to extreme heat to prevent potential hazards like short circuits or explosions.

Installation Tips

To ensure the best results, assign a unique channel to each external transmitter if using multiple units. Keep the receiver and transmitter within close proximity during initial setup to facilitate signal discovery. Always replace batteries as a complete set rather than mixing old and new cells.

Important Notes

  • Do not disassemble the unit; contact a dealer for repairs.
  • Dispose of electronic waste and batteries according to local regulations.
  • Ensure correct battery polarity to avoid damage.
M: QW-35-FL

© Copyright 2026 Manual.ly