Manual.ly Logo

Bresser Thermo-Hygro Sensor 5-Channel Manual

5.0 · 2 Ratings

PDF manual · 52 Pages

English

M: QW-35-FL
page

/ 52

Loading...
0d62834093498a30a3f9b6770e7111247309 page c
- 12 - - 13 -
General Warning
DANGER!
This device contains electronic components which
operate via a power source (power supply and/or
batteries). Do not let children use the device while
unattended. Only use the device as described in the
manual, otherwise you run the risk of an electric
shock.
Children should only use the device under adult su-
pervision. Keep packaging material, like plastic bags
and rubber bands, out of the reach of children, as
they pose a choking hazard.
Keep batteries out of the reach of children. Make
sure you insert the batteries correctly. Empty or dam-
aged batteries could cause burns if they come into
contact with the skin. If necessary, wear adequate
gloves for protection.
DANGER!
Do not expose the device to high temperatures. Use
only the recommended batteries. Do not short-circuit
the device or batteries, or throw them into a re.
Excessive heat or improper handling could trigger a
short-circuit, a re or an explosion!

Chat with your Bresser Thermo-Hygro Sensor 5-Channel manual using AI

Get instant AI answers from your Bresser Thermo-Hygro Sensor 5-Channel manual

Ask anything about the Bresser Thermo-Hygro Sensor 5-Channel. Answers come from this manual, with the pages they are based on.

Thermo-Hygro Sensor 5-Channel Maintenance Schedule

When needed
Replace batteries with a new complete set

Replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not mix brands or types.

Show in the manual (page 13)
When needed
Clean exterior with dry cloth

Remove batteries before cleaning. Use only a dry cloth on the exterior; do not use cleaning fluids to avoid electronic damage.

Show in the manual (page 13)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Thermo-Hygro Sensor 5-Channel?

Yes No
0
User Pic

Cassandre Mann

4 months ago

Does this thermometer work with existing weather stations?

0
User Pic

Manual.ly

4 months ago

Yes, this thermometer is designed to integrate seamlessly with most standard weather stations. It ensures accurate temperature readings across different areas, helping you decide when to ventilate your room during summer.

M: QW-35-FL
M: QW-35-FL
0
User Pic

OfficiaOptio82

6 months ago

Can I use this device to monitor temperatures in multiple rooms?

M: QW-35-FL

Frequently Asked Questions

A

The sensor measures temperatures between -20.0°C and +60.0°C with an accuracy of +/-1°C. It tracks relative humidity from 25% to 90% with +/-5% accuracy.

Is this answer helpful?

A

This model supports up to 5 channels, allowing you to connect and monitor up to five separate sensors simultaneously on a single compatible weather station.

Is this answer helpful?

A

No special tools are needed. You simply open the back cover, insert two AA batteries with correct polarity, and use a small pin to press the reset button inside the compartment.

Is this answer helpful?

A

Yes, but it should be placed in a sheltered location like a porch or under an eave. It must be protected from direct rain and sunlight to ensure accurate readings and longevity.

Is this answer helpful?

A

A specific low battery symbol appears on both the sensor display and the main station screen to alert you that the power source needs replacement immediately.

Is this answer helpful?

A

No, the Bresser Thermo-Hygro Sensor is a remote unit only. You must purchase a compatible Bresser weather station separately to receive the transmitted data.

Is this answer helpful?

A

Set the desired channel number using the switch located inside the battery compartment before inserting the batteries, then press the reset button to finalize the configuration.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports 5 distinct channels for multi-room monitoring
  • Wide temperature range from -20C to +60C
  • Clear LCD display with low battery warning
  • Easy setup with simple channel switching
  • Compact design suitable for wall mounting
VS

Disadvantages

  • Weather station receiver sold separately
  • Transmission range limited by building materials
  • Requires manual signal search during initial setup
  • Battery life depends heavily on usage frequency
  • Not waterproof despite outdoor use recommendations
M: QW-35-FL

Product Specification

Type

Sensor

Standard

Wireless Bus (434MHz)

Function

Temperature, Humidity

Dimensions

2.36x1.22x4.33 in

Features

Battery powered (2x AA), Display

M: QW-35-FL

Product Description

Bresser Thermo-Hygro Sensor 5-Channel: Precision Monitoring for Your Home

The Bresser Thermo-Hygro Sensor 5-Channel is a versatile tool designed to bring precise environmental data directly into your living space. This Temperature-Humidity Sensor operates on a reliable 433MHz frequency, allowing you to monitor conditions in up to five different locations simultaneously without the hassle of complex wiring. Whether you are tracking the climate in a greenhouse, a nursery, or various rooms in your home, this device ensures you always have accurate readings at your fingertips.

Designed with user convenience in mind, the sensor features a clear front display that shows current temperature and humidity levels alongside the active channel number. A dedicated LED indicator flashes whenever data is being transmitted, providing visual confirmation of connectivity. The unit is powered by two standard AA batteries and includes a wall-mounting option for flexible placement. For optimal accuracy, it is recommended to place the sensor in a shaded area with good air circulation, avoiding direct sunlight or precipitation.

Setup is straightforward and requires no technical expertise. After inserting fresh batteries and setting the desired channel using the internal switch, a simple reset button press synchronizes the device with your weather station. The system automatically alerts you when battery levels are low via a specific symbol on the display, ensuring uninterrupted monitoring. With a measurement range spanning from -20°C to +60°C for temperature and 25% to 90% relative humidity, this sensor covers a wide spectrum of environmental conditions. Its compact dimensions make it unobtrusive yet powerful enough to handle diverse monitoring needs.

Important Usage Notes

  • Always replace all batteries at once with new ones of the same brand and capacity to prevent malfunction.
  • Do not expose the device to extreme heat or short-circuit the terminals.
  • Clean only with a dry cloth; avoid liquids to protect internal electronics.
  • The effective transmission range can be reduced by thick walls or radio interference.
  • Dispose of old batteries at designated collection points according to local regulations.
M: QW-35-FL

© Copyright 2026 Manual.ly