Manual.ly Logo

Bosch PTD 1 Manual

5.0 · 5 Ratings

PDF manual · 87 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 87

Loading...
dc8d9da34818e73f444a68cf10de72e45b96 page b
English | 11
Bosch Power Tools 1 609 92A 1YH | (7.9.16)
Nur für EU-Länder:
Gemäß der europäischen Richtlinie
2012/19/EU müssen nicht mehr gebrauchs-
fähige Messwerkzeuge und gemäß der euro-
päischen Richtlinie 2006/66/EG müssen
defekte oder verbrauchte Akkus/Batterien
getrennt gesammelt und einer umweltge-
rechten Wiederverwendung zugeführt wer-
den.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt
abgegeben werden bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 3
37589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
English
Safety Notes
All instructions must be read and observed
in order to work safely with the measuring
tool. The integrated protections in the
measuring tool may be compromised if the
measuring tool is not used in accordance
with the instructions provided. Never make warning signs
on the measuring tool unrecognisable. STORE THESE IN-
STRUCTIONS IN A SAFE PLACE AND INCLUDE THEM WITH
THE MEASURING TOOL WHEN GIVING IT TO A THIRD PAR-
TY.
Caution – The use of other operating or adjusting
equipment or the application of other processing meth-
ods than those mentioned here can lead to dangerous
radiation exposure.
The measuring tool is provided with a warning label
(marked with number 7 in the representation of the
measuring tool on the graphics page).
If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
Do not make any modifications to the laser equipment.
Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
For technological reasons, the measuring tool cannot
ensure 100 % certainty. Environmental influences (e.g.
dust or steam in the measuring range), variations in tem-
perature (e.g. from fan heaters) as well as the quality and
condition of the measuring surface (e.g. heavily reflecting
or transparent materials) can lead to faulty measuring
results.
Product Description and Specifica-
tions
Intended Use
The measuring tool is intended for contact-free measuring of
surface temperature, ambient temperature and relative
humidity. It calculates the dew point temperature and can be
used to indicate thermal bridges and mould. The measuring
tool cannot detect mould spores.
The measuring tool may not be used to measure the body
temperature of humans or animals or for other medicinal
purposes.
The measuring tool is not suitable for measuring the surface
temperature of gases or liquids.
The measuring tool is not intended for commercial use.
OBJ_BUCH-1625-003.book Page 11 Wednesday, September 7, 2016 11:24 AM

Chat with your Bosch PTD 1 manual using AI

Get instant AI answers from your Bosch PTD 1 manual

Ask anything about the Bosch PTD 1. Answers come from this manual, with the pages they are based on.

PTD 1 Maintenance Schedule

As needed
Clean the measuring tool

Wipe off debris with a moist, soft cloth. Do not use cleaning agents or solvents. Ensure no liquid enters the device.

Show in the manual (page 10)
As needed
Clean sensor and lenses

Clean the humidity and temperature sensor, reception lens, and laser exit opening carefully. Use oil-free compressed air if necessary; do not use pointed objects.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PTD 1?

Yes No
0
User Pic

Michael Schneider

6 months ago

Is the device factory calibrated to ensure accurate temperature readings for home heating inspections without needing manual adjustment?

0
User Pic

Manual.ly

6 months ago

Yes, this infrared thermometer is calibrated at the factory to guarantee reliable accuracy. It is specifically designed to identify thermal weaknesses in building components and heating systems efficiently. This pre-calibration ensures you do not need expensive equipment for checking, and it avoids the delays often found in cheaper models. It meets requirements for verifying materials in older buildings.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224

Frequently Asked Questions

A

No, this device is designed for surface temperature measurement only. It cannot accurately measure liquids or gases due to the infrared line of sight limitations inherent in the technology.

Is this answer helpful?

A

The device provides approximately 9 hours of continuous operation depending on usage frequency and whether the laser is used frequently.

Is this answer helpful?

A

No, it does not detect spores directly. It calculates the risk of mold formation based on surface temperature, dew point temperature, and relative humidity data.

Is this answer helpful?

A

The optimal measuring distance ranges between half a meter and one meter. While measurements can be taken further away, accuracy may decrease due to the 10:1 optic ratio.

Is this answer helpful?

A

Yes, it measures relative humidity. However, ensure the sensor is not blocked or damaged by fumes. Ventilation is recommended when the air is contaminated.

Is this answer helpful?

A

To reset the software, remove the batteries, wait a few seconds, and then insert them again. If the error persists, contact authorized service.

Is this answer helpful?

A

The laser is Class 2 and generally safe for skin contact but should never be directed at eyes or reflective surfaces to avoid retinal damage.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Non-contact measurement allows safe and quick temperature checks without touching hot surfaces
  • Includes multiple modes for surface temp, thermal bridges, and mold warnings effectively
  • Protective pouch is included to prevent damage during transport and storage safely
  • Long battery life of approximately 9 hours provides reliable usage for extended tasks
  • Easy to read display with clear indicators for temperature humidity and error warnings
VS

Disadvantages

  • Cannot measure temperatures of liquids or gases due to infrared line of sight limitations
  • Requires acclimatization time when moving between extreme temperature environments quickly
  • Laser visibility is good but users must never look directly into the laser beam
  • Emissivity settings must be adjusted manually for accurate readings on different materials
  • Not suitable for commercial use or medical applications on humans or animals
M: qwen/qwen3.5-flash-20260224

Product Specification

Measuring Range

-4°F to +392°F

Display

Yes

Power Supply

Battery Powered (2x AA Battery)

Weight

0.62 lbs

Package Contents

Case, Battery

M: qwen/qwen3.5-flash-20260224

Product Description

Discover Precision with the Bosch DIY PTD 1

Home renovation and maintenance tasks demand accuracy and reliability to ensure safety and efficiency in all projects. The Bosch DIY PTD 1 Infrared Thermometer incl. Bag Manual helps DIY enthusiasts and professionals alike ensure optimal results for their work. This device is designed for non-contact measurement of surface temperature, ambient temperature, and relative humidity levels. It calculates dew point temperature and highlights potential thermal bridges and mold risk areas effectively.

The product features a clear display that shows measured values instantaneously for users to monitor closely. People can switch between different modes to suit specific project needs and inspection scenarios. The surface temperature mode is ideal for checking heating systems or kitchen appliances safely. The thermal bridge mode compares surface and ambient temperatures to detect insulation issues in walls accurately. The mold warning mode assesses moisture risks by analyzing environmental conditions over time regularly. Safety is paramount, with laser warnings clearly included on the device itself. However, strict adherence to safety guidelines is necessary to prevent eye injury from the direct beam.

Powering the device is straightforward with two AA alkaline manganese batteries or rechargeable options. The battery status is clearly indicated on the display to prevent unexpected interruptions during work sessions. A protective pouch is included securely to keep the tool safe during transport and long-term storage. This ensures the sensors remain clean and undamaged from dust or scratches over time. The laser beam helps visualize the measurement area effectively for precision. Battery life provides up to 9 hours of continuous operation depending on usage frequency. The HOLD function saves the last measured value on the screen automatically.

Understanding technical limits is vital for accurate data collection and proper usage of the tool. The device is not intended for medical use on humans or animals under any circumstances. It cannot measure liquid or gas temperatures accurately due to specific infrared line of sight limitations. Strong reflections or transparent surfaces may affect infrared results negatively for the user. Proper emissivity settings are required for precise readings on different materials like concrete or glass. The optimal measuring distance ranges between half a meter and one meter for best focus and accuracy. Environmental factors like steam or heavy dust can influence the sensor performance significantly.

Investing in this tool means investing in quality home maintenance solutions for your family. The Bosch DIY PTD 1 Infrared Thermometer incl. Bag Manual is a staple for responsible home care tasks. It empowers users to detect issues before they become major structural problems requiring repair. Whether checking insulation or monitoring climate control, this thermometer delivers consistent performance for users. Always follow the manual for best results and longevity of the equipment. Proper handling extends the life of the device significantly over many years. Enjoy peace of mind knowing your home remains safe and efficient for everyone. Cleaning requires a soft cloth without liquids penetrating the unit internals. The sensor can be damaged by paint fumes in the environment. Acclimatization time is needed if moving between hot and cold environments quickly. Do not leave it in a car during extreme heat or cold weather.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly