
18 | English
Troubleshooting
Problem Possible Cause Corrective Measure
Motor refuses to start Battery discharged Recharge battery
Battery too hot/cold Allow to cool/warm
Machine functions in-
termittently
On/Off switch defective Contact Bosch customer service agent
Internal wiring of garden tool defective Contact Bosch customer service agent
Garden tool subject to
overload
Grass too high Cut in stages
Garden tool does not
cut
Cutting line too short/broken off Manually feed cutting line
Spool empty Refill line spool
Cutting line can no
longer be fed
Line inside the spool entangled Inspect the spool, rewind if necessary
Spool empty Refill line spool
Line retracts into spool Cutting line too short/broken off
Remove spool – rethread line (see figures K − M)
Line breaks frequently Line inside the spool entangled
Remove spool – rewind line (see figures K − M)
Trimmer used incorrectly Only trim with the tip of the line, avoid touching
stones, walls and other hard objects. Feed the
line regularly to maintain full cutting diameter.
Heavy vibrations Cutting line broken
Manually feed cutting line (see figure L)
Cutting system damaged Contact Bosch customer service agent
Grass between spool housing and line-feed but-
ton
Disassemble spool and remove grass
Excessive grass around cutting system Remove grass from around spool
Telescopic tube com-
pressing
Height adjustment collar not correctly tightened Tighten the collar until firmly locked
Maintenance and Service
Maintenance, Cleaning and Storage
u Before any work on the garden product itself (e.g.
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
garden product. There is danger of injury when uninten-
tionally actuating the On/Off switch.
u For safe and proper working, always keep the product
clean.
Do not place other objects on the garden product.
To ensure safe and efficient operation, always keep the
product and the ventilation slots clean.
Never spray the product with water.
Never immerse the product in water.
Store the product in a secure, dry place, out of the reach of
children.
Keep all nuts, bolts and screws tight to ensure safe working
with the product.
Inspect the product and replace worn or damaged parts for
safety.
Do not modify this product. Unauthorized modifications
may impair the safety of your product and may result in in-
creased risk of injury.
Do not use a battery pack or tool that is damaged or mod-
ified. Damaged or modified batteries may exhibit unpredict-
able behaviour resulting in fire, explosion or risk of injury.
Ensure replacement parts fitted are Bosch-approved.
Battery Maintenance
Use the following procedures to enable optimum usage of
the battery:
– Protect the battery against moisture and water.
– Store the machine and battery only within a temperature
range between –20°C and 50°C . As an example, do not
leave the battery in the car in summer.
– The battery must not be stored within the product but
stored separately.
– Do not leave the battery in the product in direct sunlight.
– The ideal storage condition for the battery is 5°C.
– Occasionally clean the venting slots of the battery using a
soft, clean and dry brush.
A significantly reduced working period after charging indic-
ates that the battery is used and must be replaced.
F 016 L94 551 | (27.09.2023) Bosch Power Tools