Manual.ly Logo

Bosch DIY UniversalGrassCut 18V-26-500 Manual

0.0 · 0 Ratings

PDF manual · 274 Pages

English

M: OA-GPT-54-NAN
page

/ 274

Loading...
7c6fe473f9f4100ee511b06fced9fb208865 page d
English | 13
u Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal in-
jury.
u Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
u Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair and clothing away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
u If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
u Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe in-
jury within a fraction of a second.
Power tool use and care
u Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was de-
signed.
u Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
u Disconnect the plug from the power source and/or re-
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
u Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
u Maintain power tools and accessories. Check for mis-
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
u Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
u Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
u Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Battery tool use and care
u Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of bat-
tery pack may create a risk of fire when used with another
battery pack.
u Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
u When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
u Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
u Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
u Do not expose a battery pack or tool to fire or excess-
ive temperature. Exposure to fire or temperature above
130°C may cause explosion.
u Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
u Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
u Never service damaged battery packs. Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
Lawn trimmer and lawn edge trimmer safety
warnings
u Do not use the machine in bad weather conditions, es-
pecially when there is a risk of lightning. This de-
creases the risk of being struck by lightning.
u Thoroughly inspect the area for wildlife where the ma-
chine is to be used. Wildlife may be injured by the ma-
chine during operation.
u Thoroughly inspect the area where the machine is to
be used and remove all stones, sticks, wires, bones,
and other foreign objects. Thrown objects can cause
personal injury.
u Before using the machine, always visually inspect to
see that the cutter and the cutter assembly are not
damaged. Damaged parts increase the risk of injury.
Bosch Power Tools F 016 L94 551 | (27.09.2023)

Chat with your Bosch DIY UniversalGrassCut 18V-26-500 manual using AI

Get instant AI answers from your Bosch DIY UniversalGrassCut 18V-26-500 manual

Ask anything about the Bosch DIY UniversalGrassCut 18V-26-500. Answers come from this manual, with the pages they are based on.

UniversalGrassCut 18V-26-500 Maintenance Schedule

Before each use
Inspect cutting system and guards

Visually inspect the cutter, cutter assembly, and guards for damage before every use. Ensure guards are properly mounted and functional.

Show in the manual (page 13)
Before each use
Check working area for debris

Thoroughly check the working area and remove stones, sticks, wires, bones, and foreign objects to prevent injury from thrown parts.

Show in the manual (page 13)
After use
Clean product and ventilation slots

Keep the product and ventilation slots clean by wiping with a dry cloth. Never spray with water or immerse in water.

Show in the manual (page 18)
As needed
Replace worn or damaged parts

Inspect the product regularly and replace any worn or damaged parts for safety reasons.

Show in the manual (page 18)
Occasionally
Clean battery venting slots

Clean the venting slots of the battery occasionally using a soft, clean, and dry brush.

Show in the manual (page 18)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend UniversalGrassCut 18V-26-500?

Yes No

Product Specification

Type

Line trimmer

Cutting width

10.24 in

Cutting system

Line

Line feed

Fully automatic

Line diameter

0.06 in

Line length

13.12 ft

Features

Additional handle, adjustable head (180 degrees), telescopic

Charging time

66min

Noise level

77dB(A)

M: OA-GPT-54-NAN

Product Description

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly