Manual.ly Logo

Bosch DIY PST 900 PEL Manual

4.9 · 18 Ratings

PDF manual · 103 Pages

English

M: OA-GPT-54-NAN
page

/ 103

Loading...
18a7465836b154b4b23e9e89b7821ce49555 page e
14 | English
1 609 92A 1ZG | (13.1.16) Bosch Power Tools
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. Car-
rying power tools with your finger on the switch or energis-
ing power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Jigsaws
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an
electric shock.
Keep hands away from the sawing range. Do not reach
under the workpiece. Contact with the saw blade can
lead to injuries.
Apply the machine to the workpiece only when
switched on. Otherwise there is danger of kickback when
the cutting tool jams in the workpiece.
Pay attention that the base plate 7 rests securely on
the material while sawing. A jammed saw blade can
break or lead to kickback.
When the cut is completed, switch off the machine and
then pull the saw blade out of the cut only after it has
come to a standstill. In this manner you can avoid kick-
back and can place down the machine securely.
Use only undamaged saw blades that are in perfect con-
dition. Bent or dull saw blades can break, negatively influ-
ence the cut, or lead to kickback.
Do not brake the saw blade to a stop by applying side
pressure after switching off. The saw blade can be dam-
aged, break or cause kickback.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
OBJ_BUCH-1053-005.book Page 14 Wednesday, January 13, 2016 2:52 PM

Chat with your Bosch DIY PST 900 PEL manual using AI

Get instant AI answers from your Bosch DIY PST 900 PEL manual

Ask anything about the Bosch DIY PST 900 PEL. Answers come from this manual, with the pages they are based on.

PST 900 PEL Maintenance Schedule

Regularly
Clean saw blade holder

Remove the saw blade and tap the machine on a level surface to remove dust. Heavy contamination can cause malfunctions.

Show in the manual (page 12)
Frequently
Blow out ventilation slots

Use compressed air to clean ventilation slots frequently, especially under extreme conditions or when working with metals.

Show in the manual (page 12)
Occasionally
Lubricate guide roller

Apply a drop of oil to the guide roller occasionally to ensure smooth operation.

Show in the manual (page 13)
Regularly
Check guide roller condition

Inspect the guide roller regularly for wear; replace it through an authorized Bosch service agent if worn.

Show in the manual (page 13)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PST 900 PEL?

Yes No
0
User Pic

Murat Kadir

9 months ago

Does the Bosch jigsaw include the saw blades shown in the product picture, and how is sawdust handled - can I connect a vacuum or do I need to turn off the blower?

0
User Pic

Manual.ly

9 months ago

About the blades: some listings show example blades in the image, but they are not always included in the box. Please check the “Included in delivery” section for the exact scope for your specific model. Sawdust handling: the blower feature helps keep the cut line clear and visible. However, it can also spread dust around the room. If you want to reduce mess, you can typically switch off the blower and connect a vacuum cleaner using the appropriate adapter. Vacuuming works well, but like most jigsaw systems it does not capture every particle 100 percent.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for wood, plastic, metal, ceramic plates, and rubber. For the best results, the blade type should match the material being cut.

Is this answer helpful?

A

The pendulum action changes how the blade moves through the material. Lower settings give cleaner cuts, while higher settings improve cutting speed in softer materials.

Is this answer helpful?

A

Yes. The base plate can be adjusted for bevel cuts up to 45 degrees to the left or right, which is useful for angled projects and detailed finishing work.

Is this answer helpful?

A

Yes. Bosch Cut Control helps guide the saw along a marked line, and the LED worklight improves visibility right where the blade is working.

Is this answer helpful?

A

Yes. It can be connected to a vacuum system, and it also has a sawdust blowing function that helps keep the cutting line clear while working.

Is this answer helpful?

A

Yes. In this product version, the case and manual are included, which makes storage, transport, and setup more convenient.

Is this answer helpful?

A

Yes, but only in soft materials such as wood or plasterboard. It is best used with short blades and only at a 0° bevel angle.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Good cutting control thanks to adjustable pendulum action and speed regulation.
  • Cut Control and LED worklight improve line visibility and precision.
  • Supports bevel cuts up to 45°, expanding its use for angled projects.
  • Lightweight design and blade storage make it convenient for regular DIY use.
VS

Disadvantages

  • Plunge cutting is limited to soft materials only, not universal use.
  • Dust cover and splinter guard cannot be used in all angled-cut situations.
  • Long cuts in thick hardwood may become less accurate than with a circular saw.
  • Extended low-speed use can cause heat buildup, so cooling pauses may be needed.
M: OA-GPT-54-NAN

Product Specification

Type

Pendulum Jigsaw

Power

620W

No-load stroke rate

500-3100/min

Cutting capacity

Wood 3.54 in, Steel 0.31 in

Bevel angle

45°/45° left/right

Tool holder

Quick-change system

Features

Pendulum action (4-stage), Stroke rate regulation, LED work light, Softgrip, Vibration damping, Dust extraction, Dust blower, Bevel function

Weight

4.85 lb

Scope of delivery

Case

M: OA-GPT-54-NAN

Product Description

Bosch DIY PST 900 PEL Electric Pendulum Jigsaw incl. Case & Manual

The Bosch DIY PST 900 PEL is a practical electric pendulum jigsaw designed for clean, controlled cutting across wood, plastic, metal, ceramic tiles, and rubber. It is built for home workshops and renovation tasks where a balance of precision, comfort, and flexibility matters. With the included case and manual, it is easy to store, transport, and start using with confidence.

One of the most useful features is the four-stage pendulum action. It helps adjust cutting speed and edge quality depending on the material and the type of cut you want. For fine finishing, you can reduce the pendulum movement; for faster cutting in softer materials, you can increase it. The tool also supports bevel cuts up to 45 degrees, making it suitable for angled details, trims, and more advanced DIY work.

The PST 900 PEL is built with precision in mind. Bosch’s Cut Control system helps guide the blade along marked lines, which is especially helpful when accuracy is important. A bright LED worklight improves visibility at the cutting point, and the integrated dust blower or vacuum connection helps keep the line clear. These features make a noticeable difference when working on detailed or longer cuts.

Comfort is another strong point. The saw is relatively lightweight, easy to handle, and fitted with an ergonomic grip. The SDS blade release system simplifies blade changes, while the saw blade storage in the base keeps spare blades close at hand. This makes the tool feel well prepared for frequent use around the house or garage.

What stands out

The Bosch DIY PST 900 PEL is a well-rounded jigsaw for users who want a reliable tool without unnecessary complexity. It handles everyday cutting jobs efficiently, and the included manual helps make setup and operation straightforward. Whether you are shaping boards, trimming panels, or making detailed cutouts, it offers a dependable mix of power and control.

Notes

  • Best suited for DIY tasks and light renovation work.
  • Use the right blade for cleaner results and safer cutting.
  • Some accessories and special functions depend on the exact model and setup.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly