Manual.ly Logo

Bosch DIY PSM Primo Manual

0.0 · 0 Ratings

PDF manual · 63 Pages

English

M: OA-GPT-54-NAN
page

/ 63

Loading...
3ea9fc7059b4b411b0758a644785294a4eb5 page 9
English | 9
Bosch Power Tools 1 609 92A 1Y1 | (20.9.16)
Österreich
Unter www.bosch-pt.at können Sie online Ersatzteile
bestellen.
Tel.: (01) 797222010
Fax: (01) 797222011
E-Mail: service.elektrowerkzeuge@at.bosch.com
Schweiz
Tel.: (044) 8471511
Fax: (044) 8471551
E-Mail: [email protected]h.com
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gere[email protected]osch.com
Entsorgung
Elektrowerkzeuge, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Elektrowerkzeuge nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2012/19/EU über Elektro- und Elektronik-
Altgeräte und ihrer Umsetzung in nationales
Recht müssen nicht mehr gebrauchsfähige
Elektrowerkzeuge getrennt gesammelt und
einer umweltgerechten Wiederverwertung
zugeführt werden.
Änderungen vorbehalten.
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all in-
structions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal inju-
ries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devic
es are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
WARNING
OBJ_BUCH-2167-002.book Page 9 Tuesday, September 20, 2016 8:43 AM

Chat with your Bosch DIY PSM Primo manual using AI

Get instant AI answers from your Bosch DIY PSM Primo manual

Ask anything about the Bosch DIY PSM Primo. Answers come from this manual, with the pages they are based on.

PSM Primo Maintenance Schedule

Before each use
Empty dust box

Empty the dust box before taking breaks. Tap it against a firm support to loosen dust from the filter element before opening.

Regularly
Clean filter element

Clean the thin plates of the filter element with a soft brush to maintain optimum vacuuming performance.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend PSM Primo?

Yes No

Frequently Asked Questions

A

It is designed for dry sanding and polishing of wood, filler, and coated surfaces. It works especially well on corners, profiles, and other hard-to-reach areas where precision matters more than aggressive sanding power.

Is this answer helpful?

A

Yes. Its lightweight design, simple switch operation, and easy sanding sheet replacement make it approachable for DIY users. It is especially friendly for small home projects and basic surface preparation tasks.

Is this answer helpful?

A

Not really. The PSM Primo is better for finishing, smoothing, and detail work. It can remove material, but it is not built for large, rough, or highly demanding sanding tasks.

Is this answer helpful?

A

Yes. It includes an integrated dust box with a microfilter system, and it can also connect to a vacuum cleaner through a hose for stronger dust extraction.

Is this answer helpful?

A

Choose grit based on the task: coarse grit for rough surfaces, medium grit for leveling, and fine grit for final smoothing. Matching the sheet to the material helps improve results and extend sheet life.

Is this answer helpful?

A

No. It is intended for dry sanding only. Using it with water increases the risk of electric shock and can damage the tool.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Compact and lightweight, making it easy to control during detailed sanding jobs.
  • Pointed sanding plate helps reach corners, edges, and other awkward spaces.
  • Integrated dust box with microfilter supports cleaner work and easier cleanup.
  • Compatible with external dust extraction for improved dust control on indoor projects.
VS

Disadvantages

  • Best suited for light finishing tasks, not for heavy-duty material removal.
  • Performance depends strongly on using the right sanding sheet and grit.
  • Dust box needs regular emptying to keep suction effective.
  • Works only for dry sanding, so it is not suitable for wet applications.
M: OA-GPT-54-NAN

Product Specification

Type

Multi-sander

Power

50W (230V)

No-load orbital rate

24000/min

Orbital diameter

0.06 in

Tool mount

Hook-and-loop fastening

Special features

Softgrip, Dust extraction

Weight

1.32 lb

Scope of delivery

Dust collection box

M: OA-GPT-54-NAN

Product Description

Bosch DIY PSM Primo Electric Multi-Sander: Compact Power for Everyday Finishing

The Bosch DIY PSM Primo electric multi-sander is built for makers who want neat results without a bulky tool getting in the way. Small, lightweight, and easy to guide, it is designed for dry sanding and polishing on wood, filler, and coated surfaces. That makes it a smart choice for refreshing furniture, smoothing painted panels, or tidying up corners and profile edges where larger sanders struggle.

A Practical Tool for Detailed Work

What stands out most about this sander is its shape and handling. The pointed sanding plate helps it reach tight spaces, while the lightweight body supports longer sessions with less fatigue. For DIY users, this is especially useful when working on shelves, trim, window frames, or other projects that need controlled finishing rather than aggressive material removal.

The Bosch DIY PSM Primo electric multi-sander Manual highlights a few key habits that help users get the best performance: use only dry sanding, match the sanding sheet to the material, and keep pressure even. These basics matter because the tool’s efficiency depends heavily on the condition and grit of the sanding sheet. A well-fitted sheet with aligned dust holes also improves extraction and keeps the work area cleaner.

Dust Control and Comfortable Use

Another strong point is dust management. The integrated dust box with a microfilter system captures debris directly at the tool, and an external vacuum connection is also available for users who want even better cleanup. This is a real advantage during indoor projects, where fine dust can quickly spread across the workspace.

With a 50 W rated input, 12,000 no-load speed, and 24,000 oscillations per minute, the PSM Primo is not intended for heavy stock removal. Instead, it focuses on controlled, clean finishing. That makes it a dependable helper for preparing surfaces before painting or restoring worn pieces that need a smooth touch.

Notes for Best Results

  • Use coarse grit for rough surfaces and finer grits for final finishing.
  • Keep the sanding plate clean so the hook-and-loop backing holds properly.
  • Empty the dust box regularly to maintain suction.
  • Let the tool do the work; pressing harder does not improve sanding speed.

In short, the Bosch DIY PSM Primo electric multi-sander is a compact finishing tool that blends convenience, precision, and practical dust control. It is a strong match for home users who value neat edges, tidy surfaces, and simple operation in a lightweight package.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly