Manual.ly Logo

Bosch DIY PSM 18 LI Manual

4.3 · 3 Ratings

PDF manual · 87 Pages

English

M: OA-GPT-5-NAN
page

/ 87

Loading...
6343934efa0778229b8b3a3317e2e1228b64 page c
12 | English
1 609 92A 20D | (9.6.16) Bosch Power Tools
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all in-
structions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
WARNING
OBJ_BUCH-1201-004.book Page 12 Thursday, June 9, 2016 11:19 AM

Chat with your Bosch DIY PSM 18 LI manual using AI

Get instant AI answers from your Bosch DIY PSM 18 LI manual

Ask anything about the Bosch DIY PSM 18 LI. Answers come from this manual, with the pages they are based on.

PSM 18 LI Maintenance Schedule

Before each use
Check tool and moving parts

Check for misalignment or binding of moving parts, breakage of parts, and any condition affecting operation. Repair damaged parts before use.

After each use
Clean ventilation slots

Keep the machine and ventilation slots clean to ensure safe and proper working conditions.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PSM 18 LI?

Yes No
0
User Pic

Hans Müller

9 months ago

My battery under 'Power for ALL' does not fit (too thick). Also, the article number shown in the listing seems to be wrong. Which battery fits, and what should I verify?

0
User Pic

Manual.ly

9 months ago

For the correct replacement, please use the currently verified battery article number W855141. Some listings can show an outdated number, so if you encounter a 404 or no matching item, rely on W855141 for this model. Even with the right battery family, fit can depend on physical dimensions (thickness/clearance). Please check that your device has enough space for the battery body; if the grip area would block it, the battery will not seat properly. If you already ordered W855141 and it still does not fit, contact us with your order number and a photo of the battery slot so we can confirm compatibility.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

The PSM 18 LI is intended for dry sanding and polishing of wood, filler compounds and coated surfaces (paint, lacquer). It’s suitable for profiles, corners and hard-to-reach places. Do not use it on asbestos-containing materials; those must be handled by specialists.

Is this answer helpful?

A

No. The PSM 18 LI in the ‘solo’ configuration is supplied without battery or charger. Use only Bosch 18 V Li‑Ion PBA batteries and the manufacturer‑recommended chargers to ensure safe operation and avoid fire or damage.

Is this answer helpful?

A

The sander has an integrated microfilter dust box for self-extraction and an extraction adapter for a 19 mm vacuum hose. For especially hazardous or carcinogenic dusts, use a specialist vacuum and wear appropriate respiratory protection (P2 filter recommended).

Is this answer helpful?

A

The battery is protected by Electronic Cell Protection (ECP) against deep discharge. The tool’s electronics also provide temperature-dependent overload protection and will shut down operation if the battery temperature exceeds safe limits.

Is this answer helpful?

A

Sanding sheets attach via Velcro backing for fast changes. Clean debris from the sanding plate before mounting a new sheet. The sanding plate is removable using the SDS release slider to swap plates or rotate the plate to use fresh edges.

Is this answer helpful?

A

Yes: coarse (≈40 grit) for heavy material removal, medium (≈80–120 grit) for leveling and planing, and fine (≈180 grit) for finishing. Use metal-grade sheets only for metal and avoid cross‑contamination between materials.

Is this answer helpful?

A

Keep ventilation slots and the tool clean, empty the dust box regularly, inspect moving parts and replace worn components. Lock the On/Off switch before maintenance. For repairs, contact an authorized Bosch service center and use original spare parts.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Lightweight and compact (≈1.3 kg) for comfortable handling in tight spaces and profiles.
  • Microfilter dust box plus external extraction adapter reduces dust exposure and keeps the work area cleaner.
  • Velcro-backed dual sanding sheets and SDS plate release allow quick accessory and sheet changes.
  • Electronic Cell Protection and temperature-dependent overload protect battery and tool from damage.
  • Wide accessory range (pad extenders, lamella pad, narrow/oval tongues) increases versatility.
VS

Disadvantages

  • Sold solo — batteries and chargers are not included, adding to initial cost.
  • Limited to dry sanding; not suitable for wet applications or certain heavy-duty tasks.
  • Performance may be reduced at temperatures below 0 °C and suffers if battery overheats.
  • Noise and vibration levels can be significant — hearing protection recommended.
  • Dust box capacity limited; frequent emptying required during extended use.
M: OA-GPT-5-NAN

Product Specification

Type

Multi-sander

Battery

18V, Li-ion

No-load speed

11,000/min

No-load oscillation rate

22,000/min

Orbit diameter

0.06 in

Tool attachment

Quick-change system (SDS), Hook and loop fastening

Features

Soft grip, Dust extraction

Scope of delivery

without charger and battery, incl. 3-pc. accessory set, dust box

M: OA-GPT-54-NAN

Product Description

Bosch DIY PSM 18 LI Akku-Multischleifer solo Manual

The Bosch DIY PSM 18 LI is a compact, battery-powered multi-sander designed for precise dry sanding and polishing of wood, fillers and coated surfaces. Lightweight and portable at about 1.3 kg (EPTA), it targets DIY enthusiasts who need access to profiles, corners and tight spaces where larger sanders struggle. The tool runs on an 18 V Bosch Li‑Ion battery (sold separately) and features a high no-load speed and orbital stroke for efficient material removal while minimizing swirl marks.

Key features and handling

Equipped with a microfilter dust box and an extraction adapter for external vacuum connection, the PSM 18 LI helps keep work areas cleaner and reduces airborne dust. The sanding pad uses Velcro-backed sheets for quick changes and accepts two replaceable sanding sheets to extend working life. An SDS-style release allows easy replacement of the sanding plate and optional specialty plates and accessories (pad extenders, lamella pad, narrow and oval tongues) make the tool versatile for window slats, rounded profiles and narrow gaps.

A battery charge-control indicator with three green LEDs displays remaining charge; electronic protections guard against deep discharge and temperature-dependent overload. The sander is intended strictly for dry sanding — wet use is unsafe — and its documentation stresses appropriate PPE (eye protection, respirator for hazardous dusts) and using recommended Bosch batteries and chargers to avoid fire or damage.

Performance and safety notes

Typical A-weighted sound pressure is around 72 dB(A) (work levels may exceed 80 dB(A)); vibration totals are provided per EN 60745. Bosch recommends hearing protection and other safety measures when sanding. Dust extraction is strongly advised when working with hazardous materials (certain woods, metals, lead paints), and special vacuum cleaners should be used for carcinogenic or particularly harmful dusts. The tool includes Electronic Cell Protection (ECP) to prevent deep discharge and an overload cutoff triggered by high battery temperature.

Practical use tips

Use consistent, moderate pressure for even sanding and extended abrasive life; overpressing accelerates wear without improving removal. Match abrasive grit to the task (40–180 grit range suggested). Empty the dust box regularly and keep ventilation slots clean. Only use Bosch original accessories and service by authorized centers when repairs or parts are required.

Notes

  • Intended only for dry sanding/polishing of wood, fillers and coated surfaces. Do not use on asbestos-containing materials; those require specialists.
  • Batteries shipped partially charged — fully charge before first use.
  • Transport and disposal rules apply to lithium-ion batteries; do not dispose of in household waste.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly