Manual.ly Logo

Bosch DIY POF 1200 AE Manual

0.0 · 0 Ratings

PDF manual · 105 Pages

English

M: OA-GPT-5-NAN
page

/ 105

Loading...
e4cfb8a6d76c871a8927018a69dbe447e5e3 page e
14 | English
1 609 92A 201 | (6.6.16) Bosch Power Tools
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gere[email protected]osch.com
Entsorgung
Elektrowerkzeuge, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Elektrowerkzeuge nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2012/19/EU über Elektro- und Elektronik-
Altgeräte und ihrer Umsetzung in nationales
Recht müssen nicht mehr gebrauchsfähige
Elektrowerkzeuge getrennt gesammelt und
einer umweltgerechten Wiederverwertung
zugeführt werden.
Änderungen vorbehalten.
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all in-
structions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal inju-
ries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
WARNING
OBJ_BUCH-323-007.book Page 14 Monday, June 6, 2016 10:00 AM

Chat with your Bosch DIY POF 1200 AE manual using AI

Get instant AI answers from your Bosch DIY POF 1200 AE manual

Ask anything about the Bosch DIY POF 1200 AE. Answers come from this manual, with the pages they are based on.

POF 1200 AE Maintenance Schedule

Frequently
Clean ventilation slots

Blow out ventilation slots frequently to ensure safe and proper working. Use compressed air especially when working with metals to prevent conductive dust buildup.

Show in the manual (page 13)
Regularly
Clean extraction adapter

Clean the extraction adapter regularly to ensure optimum dust extraction performance.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend POF 1200 AE?

Yes No

Frequently Asked Questions

A

Primarily wood, plastics and lightweight building materials. With reduced speed and appropriate carbide-tipped bits it can machine non-ferrous metals like aluminium, but it’s not intended for heavy metalworking.

Is this answer helpful?

A

It accepts 6 mm and 8 mm shank bits and provides a plunge (fräskorbhub) of 55 mm, allowing substantial depth for grooves, edge work and template routing.

Is this answer helpful?

A

Coarse depth is set using the step buffer and depth stop, which can be fine-tuned by adjusting the step-stop screws. For deep cuts use multiple shallow passes. The POF 1400 ACE variant adds a dedicated fine-adjust knob.

Is this answer helpful?

A

Yes. Mount the extraction adapter on the base plate and connect a Ø 35 mm hose to the adapter. For hazardous or carcinogenic dusts use a special vacuum and follow local regulations.

Is this answer helpful?

A

Yes. A thumbwheel (thumbwheel 23) provides speed preselection in six positions; it can be adjusted while the tool is running to match material and cutter size.

Is this answer helpful?

A

Always wear eye, hearing protection and a dust mask (P2) when needed, secure the workpiece, keep hands away from the cutting area, use dust extraction, and avoid loose clothing and jewelry.

Is this answer helpful?

A

Fold down the chip shield, press the spindle lock, insert the bit at least 20 mm into the collet, then tighten the 19 mm nut with the open-end spanner while holding the spindle lock. Do not overtighten the collet without a bit inserted.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • 1200 W motor delivers reliable power for most DIY routing tasks while keeping weight manageable.
  • 55 mm plunge depth and adjustable step stops enable precise depth control and multi-pass cutting.
  • Accepts 6 mm and 8 mm shank bits and supports many accessories (parallel guide, guide bush, compass).
  • Thumbwheel speed preselection adapts RPM to material and bit size for cleaner cuts and longer tool life.
  • Dust extraction adapter (Ø 35 mm) and chip shield support cleaner, safer working conditions.
VS

Disadvantages

  • No constant-electronic speed control (feature present on POF 1400 ACE), so RPM may vary more under load.
  • Compared with higher-end models, vibration (≈6 m/s²) and noise (~95 dB(A)) require PPE and breaks.
  • Some accessories are sold separately; complete functionality requires additional purchases.
  • Not optimized for heavy-duty metal work; non-ferrous machining requires reduced speed and suitable bits.
  • Bit changes require a 19 mm spanner and spindle lock; not as fast as single-wrench systems.
M: OA-GPT-5-NAN

Product Specification

Type

Router

Power

1200W

No-load speed

11000-28000/min

Stroke

max. 2.17in

Tool holder

Quick change system (SDS), Spindle lock

Features

Speed control, Soft grip, Auxiliary handle, Parallel guide, Dust extraction

Weight

7.50lb

Scope of delivery

3x Collet

M: OA-GPT-54-NAN

Product Description

Bosch DIY POF 1200 AE Electric Router Manual

The Bosch DIY POF 1200 AE electric router is a compact plunge router designed for precision routing tasks in wood, plastics and light building materials, with limited capability for non-ferrous metals at reduced speeds. Lightweight and ergonomic, the POF 1200 AE offers a 1200 W motor, variable speed selection, dust extraction compatibility and a 55 mm plunge depth for controlled cuts. It shares many features with the POF 1400 ACE but in a slightly lighter, more budget-friendly package.

The tool is engineered for groove cutting, edge profiling, template routing and copy routing. It accepts 6 mm and 8 mm shank bits, uses a collet secured by a 19 mm nut, and supports optional accessories including parallel guides, guide bushes, a router compass, curve guide and guide rails. Safety features and handling controls include a lock-off button for the on/off switch, spindle lock for secure bit changes, twin insulated handles for two-handed control, and a step depth system for staged plunges.

Speed preselection on the thumbwheel allows matching bit diameter and material — lower speeds for large-diameter bits or plastics, higher for hardwood and fine cutters. The design emphasizes safe operation: always secure workpieces, use dust extraction when appropriate, and wear personal protective equipment. Sound and vibration data are provided to guide protective measures (typical sound pressure ~95 dB(A); vibration ah ≈ 6 m/s²).

Assembly and maintenance are straightforward: insert bits at least 20 mm into the collet, use the spindle lock and 19 mm spanner to tighten, mount the dust adapter and extraction hose (Ø 35 mm) as needed, and keep ventilation slots and extraction ports clean. The manual recommends multiple shallow passes for deep cuts and details procedures for fine depth adjustment (POF 1400 ACE has a fine-adjustment knob; POF 1200 AE uses adjustable step stops). Practical routing techniques include use of parallel guides, auxiliary fences, guide bushes for template work, curve guides, compass attachments for circles and guide rails for straight cuts.

Overall, the POF 1200 AE is positioned for DIYers and hobbyists who need a capable, maneuverable plunge router with decent power, accessory compatibility and user-friendly depth control. It's a sensible choice for cabinetry details, edge profiling and groove work when paired with proper bits and dust extraction.

Notes

  • Wear hearing and eye protection; use a suitable dust extractor and P2 respirator when needed.
  • Use only properly sized and undamaged router bits; observe max bit diameters with/without guide bushing.
  • For repetitive deep cuts, use staged passes with the step stop to reduce strain and improve finish.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly