Manual.ly Logo

Bosch DIY PKS 18 LI Manual

5.0 · 2 Ratings

PDF manual · 101 Pages

English

M: OA-GPT-54-NAN
page

/ 101

Loading...
16b8ab098d61695ad805e54bb2d409459017 page f
English | 15
Bosch Power Tools 1 609 92A 21T | (17.6.16)
– If the blade becomes twisted or misaligned in the cut,
the teeth at the back edge of the blade can dig into the top
surface of the wood causing the blade to climb out of the
kerf and jump back toward the operator.
Kickback is the result of saw misuse and/or incorrect oper-
ating procedures or conditions and can be avoided by tak-
ing proper precautions as given below.
Maintain a firm grip with both hands on the saw and po-
sition your arms to resist kickback forces. Position
your body to either side of the blade, but not in line with
the blade. Kickback could cause the saw to jump back-
wards, but kickback forces can be controlled by the opera-
tor, if proper precautions are taken.
When blade is binding, or when interrupting a cut for
any reason, release the trigger and hold the saw mo-
tionless in the material until the blade comes to a com-
plete stop. Never attempt to remove the saw from the
work or pull the saw backward while the blade is in mo-
tion or kickback may occur. Investigate and take correc-
tive actions to eliminate the cause of blade binding.
When restarting a saw in the workpiece, centre the saw
blade in the kerf and check that saw teeth are not en-
gaged into the material. If saw blade is binding, it may
walk up or kickback from the workpiece as the saw is re-
started.
Support large panels to minimise the risk of blade
pinching and kickback. Large panels tend to sag under
their own weight. Supports must be placed under the pan-
el on both sides, near the line of cut and near the edge of
the panel.
Do not use dull or damaged blades. Unsharpened or im-
properly set blades produce narrow kerf causing excessive
friction, blade binding and kickback.
Blade depth and bevel adjusting locking levers must be
tight and secure before making cut. If blade adjustment
shifts while cutting, it may cause binding and kickback.
Use extra caution when sawing into existing walls or
other blind areas. The protruding blade may cut objects
that can cause kickback.
Lower guard function
Check lower guard for proper closing before each use.
Do not operate the saw if lower guard does not move
freely and close instantly. Never clamp or tie the lower
guard into the open position. If saw is accidentally
dropped, lower guard may be bent. Raise the lower guard
with the retracting handle and make sure it moves freely
and does not touch the blade or any other part, in all angles
and depths of cut.
Check the operation of the lower guard spring. If the
guard and the spring are not operating properly, they
must be serviced before use. Lower guard may operate
sluggishly due to damaged parts, gummy deposits, or a
build-up of debris.
The lower guard may be retracted manually only for
special cuts such as “plunge cuts and angle cuts”. Raise
the lower guard by retracting the handle and as soon as
the blade enters the material, release the lower guard.
For all other sawing operations, the lower guard should op-
erate automatically.
Always observe that the lower guard is covering the
blade before placing saw down on bench or floor. An un-
protected, coasting blade will cause the saw to walk back-
wards, cutting whatever is in its path. Be aware of the time
it takes for the blade to stop after switch is released.
Additional safety warnings
Do not reach into the chip ejector with your hands. They
could be injured by rotating parts.
Do not work overhead with the saw. In this manner you
do not have sufficient control over the power tool.
Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility compa-
ny for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage.
Do not operate the power tool stationary. It is not de-
signed for operation with a saw table.
Do not use high speed steel (HSS) saw blades. Such saw
blades can easily break.
Do not saw ferrous metals. Red hot chips can ignite the
dust extraction.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Use the battery only in conjunction with your Bosch
product. This measure alone protects the battery against
dangerous overload.
The battery pack can be damaged by pointed objects
such as nails or screwdrivers or by force applied exter-
nally. An internal short circuit can occur and the battery
pack can burn, smoke, explode or overheat.
OBJ_BUCH-1889-003.book Page 15 Friday, June 17, 2016 10:05 AM

Chat with your Bosch DIY PKS 18 LI manual using AI

Get instant AI answers from your Bosch DIY PKS 18 LI manual

Ask anything about the Bosch DIY PKS 18 LI. Answers come from this manual, with the pages they are based on.

PKS 18 LI Maintenance Schedule

Before each use
Check lower guard function

Ensure the retracting blade guard moves freely and closes instantly. Do not operate if it sticks or is damaged.

Show in the manual (page 15)
After every use
Clean saw blade

Remove resin and glue residue immediately after use to maintain cutting quality.

Show in the manual (page 12)
As needed
Clean ventilation slots

Keep the machine and ventilation slots clean by blowing out dust with compressed air or using a brush.

Show in the manual (page 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PKS 18 LI?

Yes No
0
User Pic

Lina Krüger

10 months ago

I need a cordless hand circular saw for small garden jobs without a power outlet. How heavy is it, and how long can I expect it to run on one battery charge?

0
User Pic

Manual.ly

10 months ago

It is designed for smaller cut tasks, especially where no mains power is available. Users report it is much lighter than corded circular saws (about 5 kg for typical corded models), so it is easier to handle and lets you work without managing a power cable. Battery runtime depends on the battery capacity and how hard the saw is working (material type, cutting depth, and load). For best results, use the recommended battery specified in the manual and consider keeping a spare battery if you plan longer sessions. If you tell us your battery model and typical material, we can help estimate a more realistic runtime range.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for straight, cross, and mitre cuts in wood, and can also handle thin-walled non-ferrous metals with the correct saw blade. It is aimed at DIY users who need a portable, easy-to-handle cutting tool.

Is this answer helpful?

A

Yes, this version includes a 2.0Ah battery, which makes it more convenient for immediate use. The cordless setup is ideal for moving between work areas without depending on a nearby power outlet.

Is this answer helpful?

A

It can cut thin non-ferrous metals like profiles when fitted with a suitable blade. It should not be used for ferrous metals, as that is outside the intended use and may create safety risks.

Is this answer helpful?

A

The saw includes a CutControl viewing window, cutting marks, and an optional parallel guide to support more precise cutting. Final accuracy still depends on setup, blade choice, and steady handling.

Is this answer helpful?

A

Yes, it is fairly beginner-friendly because the controls are straightforward and the safety features are practical. Still, users should read the safety guidance and learn proper blade and depth adjustment before cutting.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Cordless 18V design gives freedom of movement and simpler setup on DIY jobs.
  • Adjustable cutting depth and bevel settings support flexible everyday cutting tasks.
  • CutControl window and parallel guide help improve accuracy on straight lines.
  • Included 2.0Ah battery makes it ready for many common home projects.
VS

Disadvantages

  • Best for light to medium DIY use, not demanding professional cutting work.
  • Battery runtime may be limited for longer or more intensive projects.
  • It is not intended for cutting ferrous metals.
  • Accuracy depends on using the right blade and careful setup before each cut.
M: OA-GPT-54-NAN

Product Specification

Type

Circular saw

Battery

1x Battery (18V, 2.0Ah, Li-Ion)

No-load speed

3800/min

Saw blade diameter

5.91 in

Cutting capacity

1.89 in (cutting depth at 0°)

Tool holder

Bore 0.63 in, Spindle lock

Features

Softgrip, Auxiliary handle, Parallel guide, Dust extraction

Weight

5.73 lb

Scope of delivery

Charger, 1x Battery

M: OA-GPT-54-NAN

Product Description

Bosch DIY PKS 18 LI: Cordless Cutting Made Simple

The Bosch DIY PKS 18 LI cordless circular saw is built for home projects that need clean, reliable cuts without the hassle of a power cord. With its 18V battery platform and included 2.0Ah battery, it offers the freedom to move around the workshop, garden, or renovation space with less setup and more focus on the task itself. For DIY users who want a practical saw that feels approachable, this model strikes a nice balance between portability and performance.

One of its biggest strengths is the way it handles everyday woodworking jobs. Straight cuts, crosscuts, and mitre cuts are all within its comfort zone, and the integrated cutting indicators help guide the blade along the intended line. The base plate provides stable support, while the adjustable cutting depth makes it easier to match the tool to the material. That means less wasted effort and a cleaner finish on boards, panels, and similar workpieces. The Bosch DIY PKS 18 LI Cordless circular saw incl. battery 2.0Ah Manual is especially useful if you want to understand setup, blade changes, and safe operation before getting started.

The saw also benefits from thoughtful safety and convenience features. The retracting blade guard helps protect the user during operation and when the tool is at rest, while the spindle lock and hex key system make blade changes more manageable. A parallel guide is another practical addition for repeatable, accurate cuts. Combined with Bosch’s familiar build quality, these details make the tool feel dependable for regular DIY use rather than just occasional experimentation.

Because it is cordless, the saw is especially appealing for jobs where mobility matters. You can work away from outlets, move between locations quickly, and keep the workspace tidier without trailing cables. At the same time, the 2.2 kg design remains light enough to support comfortable handling for many users. It is not meant for heavy industrial use, but for home improvement and light workshop tasks, it delivers a useful mix of control and convenience.

Notes

  • Best suited for wood and thin non-ferrous materials.
  • Use sharp, compatible blades for cleaner cuts.
  • The battery-powered design improves freedom of movement.
  • Follow the safety guidance carefully for best results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly