Manual.ly Logo

Bosch DIY PKS 18 LI Manual

5.0 · 2 Ratings

PDF manual · 101 Pages

English

M: OA-GPT-54-NAN
page

/ 101

Loading...
16b8ab098d61695ad805e54bb2d409459017 page e
14 | English
1 609 92A 21T | (17.6.16) Bosch Power Tools
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Circular Saws
Cutting procedures
DANGER: Keep hands away from cutting area and the
blade. Keep your second hand on auxiliary handle, or
motor housing. If both hands are holding the saw, they
cannot be cut by the blade.
Do not reach underneath the workpiece. The guard can-
not protect you from the blade below the workpiece.
Adjust the cutting depth to the thickness of the work-
piece. Less than a full tooth of the blade teeth should be
visible below the workpiece.
Never hold piece being cut in your hands or across your
leg. Secure the workpiece to a stable platform. It is im-
portant to support the work properly to minimize body ex-
posure, blade binding, or loss of control.
Hold the power tool by insulated gripping surfaces on-
ly, when performing an operation where the cutting
tool may contact hidden wiring. Contact with a “live” wire
will also make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
When ripping, always use a rip fence or straight edge
guide. This improves the accuracy of cut and reduces the
chance of blade binding.
Always use blades with correct size and shape (dia-
mond versus round) of arbour holes. Blades that do not
match the mounting hardware of the saw will run eccentri-
cally, causing loss of control.
Never use damaged or incorrect blade washers or bolt.
The blade washers and bolt were specially designed for
your saw, for optimum performance and safety of opera-
tion.
Kickback causes and related warnings
– Kickback is a sudden reaction to a pinched, bound or
misaligned saw blade, causing an uncontrolled saw to lift
up and out of the workpiece toward the operator;
– When the blade is pinched or bound tightly by the kerf
closing down, the blade stalls and the motor reaction
drives the unit rapidly back toward the operator;
OBJ_BUCH-1889-003.book Page 14 Friday, June 17, 2016 10:05 AM

Chat with your Bosch DIY PKS 18 LI manual using AI

Get instant AI answers from your Bosch DIY PKS 18 LI manual

Ask anything about the Bosch DIY PKS 18 LI. Answers come from this manual, with the pages they are based on.

PKS 18 LI Maintenance Schedule

Before each use
Check lower guard function

Ensure the retracting blade guard moves freely and closes instantly. Do not operate if it sticks or is damaged.

Show in the manual (page 15)
After every use
Clean saw blade

Remove resin and glue residue immediately after use to maintain cutting quality.

Show in the manual (page 12)
As needed
Clean ventilation slots

Keep the machine and ventilation slots clean by blowing out dust with compressed air or using a brush.

Show in the manual (page 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PKS 18 LI?

Yes No
0
User Pic

Lina Krüger

10 months ago

I need a cordless hand circular saw for small garden jobs without a power outlet. How heavy is it, and how long can I expect it to run on one battery charge?

0
User Pic

Manual.ly

10 months ago

It is designed for smaller cut tasks, especially where no mains power is available. Users report it is much lighter than corded circular saws (about 5 kg for typical corded models), so it is easier to handle and lets you work without managing a power cable. Battery runtime depends on the battery capacity and how hard the saw is working (material type, cutting depth, and load). For best results, use the recommended battery specified in the manual and consider keeping a spare battery if you plan longer sessions. If you tell us your battery model and typical material, we can help estimate a more realistic runtime range.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for straight, cross, and mitre cuts in wood, and can also handle thin-walled non-ferrous metals with the correct saw blade. It is aimed at DIY users who need a portable, easy-to-handle cutting tool.

Is this answer helpful?

A

Yes, this version includes a 2.0Ah battery, which makes it more convenient for immediate use. The cordless setup is ideal for moving between work areas without depending on a nearby power outlet.

Is this answer helpful?

A

It can cut thin non-ferrous metals like profiles when fitted with a suitable blade. It should not be used for ferrous metals, as that is outside the intended use and may create safety risks.

Is this answer helpful?

A

The saw includes a CutControl viewing window, cutting marks, and an optional parallel guide to support more precise cutting. Final accuracy still depends on setup, blade choice, and steady handling.

Is this answer helpful?

A

Yes, it is fairly beginner-friendly because the controls are straightforward and the safety features are practical. Still, users should read the safety guidance and learn proper blade and depth adjustment before cutting.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Cordless 18V design gives freedom of movement and simpler setup on DIY jobs.
  • Adjustable cutting depth and bevel settings support flexible everyday cutting tasks.
  • CutControl window and parallel guide help improve accuracy on straight lines.
  • Included 2.0Ah battery makes it ready for many common home projects.
VS

Disadvantages

  • Best for light to medium DIY use, not demanding professional cutting work.
  • Battery runtime may be limited for longer or more intensive projects.
  • It is not intended for cutting ferrous metals.
  • Accuracy depends on using the right blade and careful setup before each cut.
M: OA-GPT-54-NAN

Product Specification

Type

Circular saw

Battery

1x Battery (18V, 2.0Ah, Li-Ion)

No-load speed

3800/min

Saw blade diameter

5.91 in

Cutting capacity

1.89 in (cutting depth at 0°)

Tool holder

Bore 0.63 in, Spindle lock

Features

Softgrip, Auxiliary handle, Parallel guide, Dust extraction

Weight

5.73 lb

Scope of delivery

Charger, 1x Battery

M: OA-GPT-54-NAN

Product Description

Bosch DIY PKS 18 LI: Cordless Cutting Made Simple

The Bosch DIY PKS 18 LI cordless circular saw is built for home projects that need clean, reliable cuts without the hassle of a power cord. With its 18V battery platform and included 2.0Ah battery, it offers the freedom to move around the workshop, garden, or renovation space with less setup and more focus on the task itself. For DIY users who want a practical saw that feels approachable, this model strikes a nice balance between portability and performance.

One of its biggest strengths is the way it handles everyday woodworking jobs. Straight cuts, crosscuts, and mitre cuts are all within its comfort zone, and the integrated cutting indicators help guide the blade along the intended line. The base plate provides stable support, while the adjustable cutting depth makes it easier to match the tool to the material. That means less wasted effort and a cleaner finish on boards, panels, and similar workpieces. The Bosch DIY PKS 18 LI Cordless circular saw incl. battery 2.0Ah Manual is especially useful if you want to understand setup, blade changes, and safe operation before getting started.

The saw also benefits from thoughtful safety and convenience features. The retracting blade guard helps protect the user during operation and when the tool is at rest, while the spindle lock and hex key system make blade changes more manageable. A parallel guide is another practical addition for repeatable, accurate cuts. Combined with Bosch’s familiar build quality, these details make the tool feel dependable for regular DIY use rather than just occasional experimentation.

Because it is cordless, the saw is especially appealing for jobs where mobility matters. You can work away from outlets, move between locations quickly, and keep the workspace tidier without trailing cables. At the same time, the 2.2 kg design remains light enough to support comfortable handling for many users. It is not meant for heavy industrial use, but for home improvement and light workshop tasks, it delivers a useful mix of control and convenience.

Notes

  • Best suited for wood and thin non-ferrous materials.
  • Use sharp, compatible blades for cleaner cuts.
  • The battery-powered design improves freedom of movement.
  • Follow the safety guidance carefully for best results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly