Manual.ly Logo

Bosch DIY PBS 75 A Manual

5.0 · 1 Ratings

PDF manual · 72 Pages

English

M: OA-GPT-5-NAN
page

/ 72

Loading...
6a66ca2109eb4a0c984ae4b95f799749703d page a
10 | Deutsch
1 609 92A 1P3 | (8.6.16) Bosch Power Tools
Arbeiten Sie möglichst mit geringem Anpressdruck, um die Le-
bensdauer der Schleifbänder zu erhöhen. Das Eigengewicht
des Elektrowerkzeuges reicht für eine gute Schleifleistung
aus. Eine übermäßige Erhöhung des Anpressdruckes führt
nicht zu einer höheren Schleifleistung, sondern zu stärkerem
Verschleiß des Elektrowerkzeuges und des Schleifbandes.
Setzen Sie das Elektrowerkzeug eingeschaltet auf die zu bear-
beitende Fläche. Arbeiten Sie mit mäßigem Vorschub und
führen Sie den Schleifvorgang parallel und überlappend zu
den Schleifbahnen durch. Schleifen Sie in Faserrichtung,
querlaufende Schleifspuren ergeben störende Schleifeffekte.
Insbesondere beim Abschleifen von Lackresten kann es vor-
kommen, dass diese verschmelzen und es zum Verschmieren
der Werkstoffoberfläche und des Schleifbandes kommt. Ar-
beiten Sie deshalb mit Staubabsaugung.
Ein Schleifband mit dem bereits Metall bearbeitet wurde, soll-
te nicht mehr für andere Materialien genutzt werden.
Verwenden Sie nur original Bosch-Schleifzubehör.
Bewahren Sie Schleifbänder nur hängend auf und knicken Sie
diese nicht, weil sie sonst unbrauchbar werden.
Mit dem Schleifrahmen (Zubehör) ist eine gleichmäßige, do-
sierbare Abtragsleistung beim Planschleifen größerer Holzflä-
chen möglich.
Wartung und Service
Wartung und Reinigung
Ziehen Sie vor allen Arbeiten am Elektrowerkzeug den
Netzstecker aus der Steckdose.
Halten Sie das Elektrowerkzeug und die Lüftungs-
schlitze sauber, um gut und sicher zu arbeiten.
Entfernen Sie anhaftenden Schleifstaub mit einem Pinsel.
Staubgang reinigen (siehe Bild E)
Nehmen Sie von Zeit zu Zeit die Schutzkappe 14 ab und säu-
bern Sie den Staubgang 15, damit die Saugleistung optimal
erhalten bleibt.
Wenn ein Ersatz der Anschlussleitung erforderlich ist, dann
ist dies von Bosch oder einer autorisierten Kundendienststel-
le für Bosch-Elektrowerkzeuge auszuführen, um Sicherheits-
gefährdungen zu vermeiden.
Kundendienst und Anwendungsberatung
Der Kundendienst beantwortet Ihre Fragen zu Reparatur und
Wartung Ihres Produkts sowie zu Ersatzteilen. Explosions-
zeichnungen und Informationen zu Ersatzteilen finden Sie
auch unter:
www.bosch-pt.com
Das Bosch-Anwendungsberatungs-Team hilft Ihnen gerne bei
Fragen zu unseren Produkten und deren Zubehör.
www.bosch-do-it.de, das Internetportal für Heimwerker und
Gartenfreunde.
www.1-2-do.com
In der Heimwerker-Community 1-2-do.com können Sie
Produkttester werden, Ideen sammeln oder sich mit anderen
Heimwerkern austauschen.
www.dha.de, das komplette Service-Angebot der Deutschen
Heimwerker Akademie.
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
bitte unbedingt die 10-stellige Sachnummer laut Typenschild
des Elektrowerkzeuges an.
Deutschland
Robert Bosch Power Tools GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Unter www.bosch-pt.com können Sie online Ersatzteile be-
stellen oder Reparaturen anmelden.
Kundendienst: Tel.: (0711) 40040480
Fax: (0711) 40040481
E-Mail: Servicezentrum.Ele[email protected]osch.com
Anwendungsberatung: Tel.: (0711) 40040480
Fax: (0711) 40040482
E-Mail: Anwendungsbe[email protected].com
Österreich
Unter www.bosch-pt.at können Sie online Ersatzteile bestel-
len.
Tel.: (01) 797222010
Fax: (01) 797222011
E-Mail: service.elektrowerkzeu[email protected].com
Schweiz
Unter www.bosch-pt.com/ch/de können Sie online Ersatz-
teile bestellen.
Tel.: (044) 8471511
Fax: (044) 8471551
E-Mail: [email protected]h.com
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gere[email protected]osch.com
Entsorgung
Elektrowerkzeuge, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Elektrowerkzeuge nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2012/19/EU über Elektro- und Elektronik-
Altgeräte und ihrer Umsetzung in nationales
Recht müssen nicht mehr gebrauchsfähige
Elektrowerkzeuge getrennt gesammelt und
einer umweltgerechten Wiederverwertung
zugeführt werden.
Änderungen vorbehalten.
OBJ_BUCH-1634-005.book Page 10 Wednesday, June 8, 2016 3:52 PM

Chat with your Bosch DIY PBS 75 A manual using AI

Get instant AI answers from your Bosch DIY PBS 75 A manual

Ask anything about the Bosch DIY PBS 75 A. Answers come from this manual, with the pages they are based on.

PBS 75 A Maintenance Schedule

Every 5 minutes
Empty dust box and clean filter

Empty the dust box after 5 minutes of operation and clean the filter element with a soft brush to ensure optimal suction.

Periodic
Clean ventilation slots

Regularly clean the power tool's air vents with a brush to remove adherent sanding dust and prevent electrical hazards.

Periodic
Clean dust passage

Remove the protection cover from time to time and clean the dust passage to maintain optimum suction capacity.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PBS 75 A?

Yes No
0
User Pic

Garth Miller

10 months ago

Was the ordering process and handling of my purchase smooth?

0
User Pic

Manual.ly

10 months ago

Based on customer feedback, the ordering process and purchase handling are straightforward and were completed to buyers' satisfaction. After you place your order, keep an eye on your confirmation and any follow-up communication related to fulfillment. If anything is unclear or delayed, our support team can help you check the status and resolve issues quickly.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

The PBS 75A is intended for dry sanding of wood, plastics, metal, filler compounds and varnished surfaces. For hazardous materials or asbestos-containing items, only qualified specialists should perform the work and appropriate extraction must be used.

Is this answer helpful?

A

Pivot the clamping lever fully out to release the belt, fit the new belt ensuring arrow directions match, pivot the lever back, lift and switch on the sander to auto-center. If needed, use the front adjustment screw to set a 2–3 mm clearance from the aluminum housing.

Is this answer helpful?

A

Use the integrated Microfilter dust box for normal use and connect an appropriate external vacuum for finer or hazardous dusts. Empty the dust box regularly (recommended after about 5 minutes under heavy load) and clean the filter element to maintain suction. For carcinogenic dusts, use a specialist vacuum and a P2 respirator.

Is this answer helpful?

A

Choose grit by task: coarse 40–60 for heavy stock removal, medium 80–120 for leveling and planing, fine 180–240 for finishing. For the PBS 75 AE model, select belt speed (200–350 m/min) with the thumbwheel: higher speed increases removal and can improve finish depending on material.

Is this answer helpful?

A

Always wear eye protection, hearing protection (noise ~93 dB(A)), and a dust mask (P2 recommended). Avoid loose clothing and jewelry, keep bystanders away, and use residual-current device protection outdoors or in damp conditions.

Is this answer helpful?

A

Disconnect power before maintenance, keep ventilation slots and dust passages clean, brush off adhered dust, inspect moving parts and belts regularly, replace damaged belts, and have repairs or cord replacements performed by authorized Bosch service centers with original parts.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • High removal capacity with compact 710–750 W motor for fast sanding.
  • AE model offers adjustable belt speed (200–350 m/min) for material-specific control.
  • Integrated Microfilter dust box plus external extraction compatibility for cleaner work.
  • Lightweight (around 3.4–3.5 kg) and dual insulated grips enable stable two-hand operation.
  • Straightforward belt change with automatic centering and manual tracking adjustment.
VS

Disadvantages

  • High noise level (approx. 93 dB(A)) requires mandatory hearing protection.
  • Dust box requires frequent emptying (about every 5 minutes under heavy use).
  • Not intended for wet sanding; water ingress risks electric shock.
  • Sanding belts used on metal cannot be repurposed for other materials.
  • Vibration level (ah ≈ 3.5 m/s²) may require exposure-management measures for long sessions.
M: OA-GPT-5-NAN

Product Specification

Type

Belt Sander

Power

710W (230V)

Belt Speed

984.25ft/min

Sanding Surface

6.50x2.99in (LxW)

Belt Length

20.98in

Special Features

Softgrip, Auxiliary Handle, Dust Extraction

Weight

7.50lb

Package Contents

Dust Collection Box

M: OA-GPT-54-NAN

Product Description

Bosch DIY PBS 75A Electric Belt Sander Manual

The Bosch DIY PBS 75A electric belt sander is a compact, high-removal machine designed for dry sanding of wood, plastics, metal, fillers and painted surfaces. With a 75 mm wide, 533 mm long sanding belt and a robust 710–750 W motor (depending on model), it delivers strong material removal while remaining easy to handle for DIYers and pros alike. The tool’s form factor emphasizes two insulated gripping surfaces and a secure two-hand operation to maximize control and safety during extended use.

Key features and usage

The PBS 75A family includes models with fixed belt speed (350 m/min) and an AE variant offering belt-speed preselection (200–350 m/min) via a thumbwheel, enabling adaptable performance across coarse and fine sanding tasks. The unit incorporates a Microfilter dust box for integrated extraction and supports external vacuum connection for cleaner operation when sanding hazardous or fine dusts. Changing belts is straightforward using the pivoting clamping lever; automatic centering assists on power-up, and a front adjustment screw provides manual tracking correction if needed.

Practical operation advice recommends light, even pressure—letting the sander’s weight do the work—working with overlapping strokes in the wood grain direction, and choosing grit according to task: coarse (40–60) for heavy stock removal, medium (80–120) for leveling and planing, and fine (180–240) for finishing. Regularly empty the dust box (recommended after about 5 minutes of continuous use) and clean the filter to maintain extraction efficiency.

Safety and maintenance highlights

Extensive safety guidance covers electrical precautions (proper plugs, dry conditions, residual-current protection outdoors), personal protective equipment (eye, hearing and dust protection), and dust handling (use suitable extraction, P2 respirators for wood dust, and special vacuum systems for carcinogenic or toxic dusts). The manual stresses routine maintenance: keep vents clean, brush off adhered dust, inspect moving parts, and have repairs performed only by qualified Bosch service centers using original parts. Noise levels are high—sound pressure about 93 dB(A)—so hearing protection is mandatory.

Notes

  • Use only Bosch original sanding belts and accessories for best performance and safety.
  • Avoid using a belt that has been used on metal for wood or other materials.
  • Store sanding belts hanging and uncreased to prevent damage.
  • For heavy-duty or carcinogenic dusts, use a dedicated certified vacuum.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly