Manual.ly Logo

Bosch DIY EasyDrill 1200 Manual

0.0 · 0 Ratings

PDF manual · 215 Pages

English

M: QW-35-FL
page

/ 215

Loading...
373598f794fee1c172941749f256260fbe1b page a
10 | Deutsch
Akku entnehmen (siehe Bild A)
u Benutzen Sie nur die in den technischen Daten aufge-
führten Ladegeräte. Nur diese Ladegeräte sind auf den
bei Ihrem Elektrowerkzeug verwendeten Li-Ionen-Akku
abgestimmt.
Hinweis: Der Akku wird teilgeladen ausgeliefert. Um die vol-
le Leistung des Akkus zu gewährleisten, laden Sie vor dem
ersten Einsatz den Akku vollständig im Ladegerät auf.
Der Li-Ionen-Akku kann jederzeit aufgeladen werden, ohne
die Lebensdauer zu verkürzen. Eine Unterbrechung des La-
devorganges schädigt den Akku nicht.
Der Li-Ionen-Akku ist durch die „Electronic Cell Protection
(ECP)“ gegen Tiefentladung geschützt. Bei entladenem Akku
wird das Elektrowerkzeug durch eine Schutzschaltung abge-
schaltet: Das Einsatzwerkzeug bewegt sich nicht mehr.
u Drücken Sie nach dem automatischen Abschalten des
Elektrowerkzeuges nicht weiter auf den Ein-/Aus-
schalter. Der Akku kann beschädigt werden.
Zur Entnahme des Akkus (8) drücken Sie die Entriegelungs-
taste (7) und ziehen den Akku nach unten aus dem Elektro-
werkzeug. Wenden Sie dabei keine Gewalt an.
Beachten Sie die Hinweise zur Entsorgung.
Werkzeugwechsel (siehe Bild B)
u Nehmen Sie den Akku vor allen Arbeiten am Elektro-
werkzeug (z.B. Wartung, Werkzeugwechsel etc.) so-
wie bei dessen Transport und Aufbewahrung aus dem
Elektrowerkzeug. Bei unbeabsichtigtem Betätigen des
Ein-/Ausschalters besteht Verletzungsgefahr.
Bei nicht gedrücktem Ein-/Ausschalter (10) wird die Bohr-
spindel arretiert. Dies ermöglicht ein schnelles, bequemes
und einfaches Wechseln des Einsatzwerkzeuges im Bohrfut-
ter.
Öffnen Sie das Schnellspannbohrfutter (2) durch Drehen in
Drehrichtung ➊, bis das Werkzeug eingesetzt werden kann.
Setzen Sie das Werkzeug ein.
Drehen Sie die Hülse des Schnellspannbohrfutters (2) in
Drehrichtung ➋ von Hand kräftig zu. Das Bohrfutter wird da-
durch automatisch verriegelt.
Die Verriegelung löst sich wieder, wenn Sie zum Entfernen
des Werkzeuges die Hülse in Gegenrichtung drehen.
Staub-/Späneabsaugung
Stäube von Materialien wie bleihaltigem Anstrich, einigen
Holzarten, Mineralien und Metall können gesundheitsschäd-
lich sein. Berühren oder Einatmen der Stäube können allergi-
sche Reaktionen und/oder Atemwegserkrankungen des Be-
nutzers oder in der Nähe befindlicher Personen hervorrufen.
Bestimmte Stäube wie Eichen- oder Buchenstaub gelten als
krebserzeugend, besonders in Verbindung mit Zusatzstoffen
zur Holzbehandlung (Chromat, Holzschutzmittel). Asbesthal-
tiges Material darf nur von Fachleuten bearbeitet werden.
– Sorgen Sie für gute Belüftung des Arbeitsplatzes.
– Es wird empfohlen, eine Atemschutzmaske mit Filterklas-
se P2 zu tragen.
Beachten Sie in Ihrem Land gültige Vorschriften für die zu
bearbeitenden Materialien.
u Vermeiden Sie Staubansammlungen am Arbeitsplatz.
Stäube können sich leicht entzünden.
Betrieb
Inbetriebnahme
Akku einsetzen
Hinweis: Der Gebrauch von nicht für Ihr Elektrowerkzeug ge-
eigneten Akkus kann zu Fehlfunktionen oder zur Beschädi-
gung des Elektrowerkzeuges führen.
Stellen Sie den Drehrichtungsumschalter (6) auf die Mitte,
um ein unbeabsichtigtes Einschalten zu verhindern. Setzen
Sie den geladenen Akku (8) in den Griff ein, bis dieser spür-
bar einrastet und bündig am Griff anliegt.
Drehrichtung einstellen (siehe Bild C)
Mit dem Drehrichtungsumschalter (6) können Sie die Dreh-
richtung des Elektrowerkzeuges ändern. Bei gedrücktem
Ein-/Ausschalter (10) ist dies jedoch nicht möglich.
Rechtslauf: Zum Bohren und Eindrehen von Schrauben
drücken Sie den Drehrichtungsumschalter (6) nach links bis
zum Anschlag durch.
Linkslauf: Zum Lösen bzw. Herausdrehen von Schrauben
und Muttern drücken Sie den Drehrichtungsumschalter (6)
nach rechts bis zum Anschlag durch.
Betriebsart einstellen
Bohren
EasyDrill 1200:
Stellen Sie den Einstellring Drehmomentvor-
wahl (3) auf das Symbol „Bohren“.
EasyImpact 1200:
Stellen Sie den Einstellring Betriebsartvorwahl
(4) auf das Symbol „Bohren“.
Schrauben
EasyDrill 1200:
Stellen Sie den Einstellring Drehmomentvor-
wahl (3) auf das gewünschte Drehmoment ein.
EasyImpact 1200:
Stellen Sie den Einstellring Betriebsartvorwahl
(4) auf das Symbol „Schrauben“.
Stellen Sie den Einstellring Drehmomentvor-
wahl (3) auf das gewünschte Drehmoment ein.
Schlagbohren
EasyImpact 1200:
Stellen Sie den Einstellring Betriebsartvorwahl
(4) auf das Symbol „Schlagbohren“.
Drehmoment vorwählen
Mit dem Einstellring Drehmomentvorwahl (3) können Sie
das benötigte Drehmoment in 20 Stufen vorwählen. Bei rich-
1 609 92A 7WD | (20.06.2022) Bosch Power Tools

Chat with your Bosch DIY EasyDrill 1200 manual using AI

Get instant AI answers from your Bosch DIY EasyDrill 1200 manual

Ask anything about the Bosch DIY EasyDrill 1200. Answers come from this manual, with the pages they are based on.

EasyDrill 1200 Maintenance Schedule

After extended low-speed use
Cool down the tool

Run the tool at maximum speed without load for about 3 minutes to cool it down after working at low speeds for an extended period.

Show in the manual (page 17)
Before each use or as needed
Check moving parts and condition

Check that moving parts function properly without binding and that no parts are broken or damaged before use.

As needed
Clean tool and ventilation slots

Keep the power tool and ventilation slots clean to ensure safe and efficient operation.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend EasyDrill 1200?

Yes No

Frequently Asked Questions

A

This cordless drill is designed for drilling into wood, metal, ceramic, and plastic. It is not equipped for impact drilling in masonry like brick or stone.

Is this answer helpful?

A

Locate the rotational direction switch on the top of the handle. Slide it fully to the left for clockwise rotation (driving screws) or fully to the right for counter-clockwise rotation (loosening screws).

Is this answer helpful?

A

Yes, by selecting the appropriate torque setting on the presetting ring. For larger screws in hard materials, pre-drilling a pilot hole is recommended to prevent splitting.

Is this answer helpful?

A

The product typically ships with a partially charged lithium-ion battery. It is recommended to charge it fully before the first use to ensure maximum performance.

Is this answer helpful?

A

The gear selector allows you to choose between two speed ranges. Gear I is for low speed and high torque, ideal for screwdriving. Gear II is for high speed, suitable for drilling small holes.

Is this answer helpful?

A

Bosch batteries generally come with a specific warranty period. Please check the packaging or official website for the exact duration applicable to your region.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Lightweight and ergonomic design for comfortable handling
  • Two-speed gearbox offers versatility for drilling and screwdriving
  • Integrated LED light improves visibility in dark spaces
  • Keyless chuck enables fast and easy bit changes
  • Electronic Cell Protection prevents deep discharge of the battery
VS

Disadvantages

  • Not suitable for heavy-duty masonry drilling without impact function
  • Battery capacity may be insufficient for very long continuous jobs
  • Torque limit might be lower than professional-grade models
M: QW-35-FL

Product Specification

Type

Screwdriver

M: QW-35-FL

Product Description

Discover the Power of the Bosch DIY EasyDrill 1200

The Bosch DIY EasyDrill 1200 Cordless Drill Driver stands as a testament to precision engineering designed specifically for home improvement enthusiasts. This versatile tool combines reliability with ease of use, making it an essential addition to any DIY toolkit. Whether you are assembling furniture, hanging shelves, or tackling minor repairs around the house, this drill driver delivers consistent performance without the hassle of cords.

At the heart of its operation is a robust 12-volt lithium-ion battery system. This power source ensures that the tool remains lightweight yet powerful enough to handle a variety of tasks. The ergonomic design features an insulated grip that enhances user safety and comfort during extended periods of work. A standout feature is the integrated PowerLight, which illuminates the work area in dimly lit corners, ensuring accuracy even in challenging environments.

The EasyDrill 1200 offers two-speed settings, allowing users to switch between low torque for screwdriving applications and high speed for drilling into wood, metal, ceramic, and plastic. The adjustable torque ring provides 20 different settings, giving you precise control over how tightly a screw is driven, preventing damage to materials or stripped heads. Additionally, the keyless chuck allows for quick and tool-free bit changes, streamlining your workflow significantly.

Safety is paramount in the design of this device. It includes a temperature-dependent overload protection system that automatically reduces speed if the motor becomes too hot, protecting both the tool and the user. The automatic spindle lock holds the chuck stationary when the trigger is released, making bit changes safer and easier. With these thoughtful features, the Bosch DIY EasyDrill 1200 Manual guides users through safe and efficient operation every time.

Important Notes

  • Always remove the battery before changing accessories.
  • Wear appropriate eye protection when drilling.
  • Ensure the workpiece is securely clamped before starting.
  • Use only recommended chargers for optimal battery life.

Pros

  • Lightweight and ergonomic design for comfortable handling.
  • Two-speed gearbox offers versatility for drilling and screwdriving.
  • Integrated LED light improves visibility in dark spaces.
  • Keyless chuck enables fast and easy bit changes.
  • Electronic Cell Protection prevents deep discharge of the battery.

Cons

  • Not suitable for heavy-duty masonry drilling without impact function.
  • Battery capacity may be insufficient for very long continuous jobs.
  • Torque limit might be lower than professional-grade models.
M: QW-35-FL

© Copyright 2026 Manual.ly