Manual.ly Logo

Bosch DIY AdvancedGrind 18V-80 Manual

5.0 · 1 Ratings

PDF manual · 385 Pages

English

M: OA-GPT-54-NAN
page

/ 385

Loading...
a3a41e5d01fb5b798bcc25266a2704c041f7 page 14
20 | English
tery pack may create a risk of fire when used with another
battery pack.
u Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
u When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
u Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
u Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
u Do not expose a battery pack or tool to fire or excess-
ive temperature. Exposure to fire or temperature above
130°C may cause explosion.
u Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
u Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
u Never service damaged battery packs. Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety information for the angle grinder
Safety warnings common for grinding, sanding, wire
brushing or cutting-off operations:
u This power tool is intended to function as a grinder,
sander, wire brush or cut-off tool. Read all safety
warnings, instructions, illustrations and specifica-
tions provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
u Operations such as polishing or hole cutting are not to
be performed with this power tool. Operations for
which the power tool was not designed may create a haz-
ard and cause personal injury.
u Do not convert this power tool to operate in a way
which is not specifically designed and specified by the
tool manufacturer. Such a conversion may result in a
loss of control and cause serious personal injury.
u Do not use accessories which are not specifically de-
signed and specified by the tool manufacturer. Just
because the accessory can be attached to your power
tool, it does not assure safe operation.
u The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated speed
can break and fly apart.
u The outside diameter and the thickness of your ac-
cessory must be within the capacity rating of your
power tool. Incorrectly sized accessories cannot be ad-
equately guarded or controlled.
u The dimensions of the accessory mounting must fit
the dimensions of the mounting hardware of the
power tool. Accessories that do not match the mounting
hardware of the power tool will run out of balance, vibrate
excessively and may cause loss of control.
u Do not use a damaged accessory. Before each use in-
spect the accessory such as abrasive wheels for chips
and cracks, backing pad for cracks, tear or excess
wear, wire brush for loose or cracked wires. If power
tool or accessory is dropped, inspect for damage or in-
stall an undamaged accessory. After inspecting and
installing an accessory, position yourself and bystand-
ers away from the plane of the rotating accessory and
run the power tool at maximum no-load speed for one
minute. Damaged accessories will normally break apart
during this test time.
u Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing pro-
tectors, gloves and workshop apron capable of stop-
ping small abrasive or workpiece fragments. The eye
protection must be capable of stopping flying debris gen-
erated by various applications. The dust mask or respir-
ator must be capable of filtrating particles generated by
the particular application. Prolonged exposure to high in-
tensity noise may cause hearing loss.
u Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal
protective equipment. Fragments of workpiece or of a
broken accessory may fly away and cause injury beyond
immediate area of operation.
u Hold the power tool by insulated gripping surfaces
only, when performing an operation where the cutting
tool may contact hidden wiring. Contact with a "live"
wire will also make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
u Never lay the power tool down until the accessory has
come to a complete stop. The spinning accessory may
grab the surface and pull the power tool out of your con-
trol.
u Do not run the power tool while carrying it at your
side. Accidental contact with the spinning accessory
could snag your clothing, pulling the accessory into your
body.
u Regularly clean the power tool’s air vents. The motor’s
fan will draw the dust inside the housing and excessive
1 609 92A 7GR | (13.07.2022) Bosch Power Tools

Chat with your Bosch DIY AdvancedGrind 18V-80 manual using AI

Get instant AI answers from your Bosch DIY AdvancedGrind 18V-80 manual

Ask anything about the Bosch DIY AdvancedGrind 18V-80. Answers come from this manual, with the pages they are based on.

AdvancedGrind 18V-80 Maintenance Schedule

Before each use
Inspect accessory for damage

Check abrasive wheels for chips and cracks, backing pads for wear, and wire brushes for loose wires. Test run for one minute after installation.

Show in the manual (page 20)
Regularly
Clean ventilation slots

Remove dust accumulation from motor vents to prevent electrical hazards caused by the motor fan drawing dust inside.

Show in the manual (page 20)
Regularly
Keep tool and handles clean

Maintain the power tool and ventilation slots clean for safe operation. Keep handles dry, clean, and free of oil and grease.

Show in the manual (page 17)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend AdvancedGrind 18V-80?

Yes No
0
User Pic

Berneice Marquardt

9 months ago

Does the 3Ah battery really last long on the cordless angle grinder, and can I control the speed for safer, battery-friendly use?

0
User Pic

Manual.ly

9 months ago

Yes. Reviews mention that with the 3Ah battery the runtime is surprisingly long for quick cuts and short jobs. The tool also lets you regulate the speed, so you do not have to run it at full power for every task. Using a lower speed can make the grinder easier to handle and help preserve battery capacity, which is especially useful when precision matters or when working for longer periods. Actual runtime depends on the material, blade type, and load, so heavy grinding will reduce runtime compared to lighter cutting.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for cutting, rough grinding, brushing, and sanding tasks on metal and stone. With the right accessory, it can also support surface preparation and rust removal for DIY projects.

Is this answer helpful?

A

Yes. It runs on Bosch 18V batteries, giving you cordless freedom and easier handling in places where a power outlet is not nearby.

Is this answer helpful?

A

Usually, the solo version is sold without a battery and charger. It is meant for users who already have compatible Bosch 18V battery equipment.

Is this answer helpful?

A

Yes, but stone cutting requires the correct cutting guard and enough dust extraction. A diamond cutting disc is typically the best choice for that job.

Is this answer helpful?

A

Key safety features include soft start, restart protection, overload protection, and a protective guard system. These help improve control during startup and use.

Is this answer helpful?

A

Bosch recommends compatible PBA 18V batteries, ideally 4.0 Ah or higher, for better runtime and stronger performance during demanding tasks.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Cordless 18V design improves mobility and makes it easy to work away from mains power.
  • Speed preselection on the AdvancedGrind 18V-80 helps match performance to different materials.
  • Constant electronic control, soft start, and restart protection support smoother, safer operation.
  • Compatible with a range of Bosch PBA 18V batteries and standard M14 accessories.
VS

Disadvantages

  • Solo version usually means battery and charger are not included.
  • Not intended for polishing or hole cutting, so it is not a true all-purpose grinder.
  • Stone cutting requires strong dust extraction and careful setup.
  • Best performance depends on a higher-capacity battery, ideally 4.0 Ah or more.
M: OA-GPT-54-NAN

Product Specification

Type

Angle Grinder

Battery

18V, Li-ion

No-load speed

2800-12000/min

Disc diameter

4.92 in

Tool mounting

Spindle thread M14, Spindle lock

Features

Speed control, Charge level indicator, Constant electronics, Soft grip, Auxiliary handle, Soft start, Restart protection, Vibration damping, Overload protection

Weight

3.75 lb

Scope of delivery

without charger and battery

M: OA-GPT-54-NAN

Product Description

Bosch DIY AdvancedGrind 18V-80 Cordless Angle Grinder Solo Manual

The Bosch DIY AdvancedGrind 18V-80 Cordless Angle Grinder solo Manual is built for makers who want freedom of movement without giving up control. As a cordless 18V grinder, it is aimed at cutting, rough grinding, brushing, and sanding tasks around the workshop, garage, or home renovation space. The solo version is especially practical if you already own compatible Bosch PBA batteries and chargers, letting you expand your tool set without buying duplicates.

What makes this grinder stand out is its balance of power and control. The AdvancedGrind 18V-80 offers speed preselection, so you can match the tool to the material, whether you are removing paint from metal, cleaning rust, or cutting stone with a diamond wheel. A constant electronic system helps keep speed stable under load, while soft start and restart protection improve handling and safety during everyday use.

Bosch also puts a clear focus on comfort. The tool supports a standard or low-vibration auxiliary handle, which helps reduce fatigue during longer sessions. The protective guard system is designed for both grinding and cutting, and the machine uses an M14 spindle with compatible discs and accessories. That makes it a versatile choice for users who want one grinder to cover multiple DIY jobs.

Why it appeals to DIY users

The 125 mm disc size gives a useful working range for common tasks, while the 18V battery platform keeps the tool portable and convenient. With the right accessory, it can handle metal finishing, surface preparation, and cutting jobs with confidence. Bosch recommends a battery of at least 4.0 Ah for strong performance, which is a good reminder that this grinder is made for real work rather than light touch-ups only.

Notes

  • Use the correct guard for grinding or cutting.
  • Always check disc speed rating before installation.
  • Dust extraction is important when cutting stone.
  • Let discs cool before handling after use.
  • For best runtime, use a compatible high-capacity Bosch battery.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly