Manual.ly Logo

Bosch DIY AdvancedGrind 18V-80 Manual

5.0 · 1 Ratings

PDF manual · 385 Pages

English

M: OA-GPT-54-NAN
page

/ 385

Loading...
a3a41e5d01fb5b798bcc25266a2704c041f7 page 11
Deutsch | 17
u Das Elektrowerkzeug darf nur für Trockenschnitt/Tro-
ckenschliff verwendet werden.
u Bei Verwendung der Schutzhaube zum Trennen (12),
der Schutzhabe zum Schleifen (11) oder der Schutz-
haube zum Schleifen (11) mit montierter Abdeckung
zum Trennen (13) für Trenn- und Schleifanwendungen
in Beton oder Mauerwerk besteht eine erhöhte Staub-
belastung sowie ein erhöhtes Risiko, die Kontrolle
über das Elektrowerkzeug zu verlieren, was zum Rück-
schlag führen kann.
Verwenden Sie zum Trennen von Stein am besten eine Dia-
mant-Trennscheibe.
Bei Verwendung der Absaughaube zum Trennen mit Füh-
rungsschlitten (29) muss der Staubsauger zum Absaugen
von Steinstaub zugelassen sein. Bosch bietet geeignete
Staubsauger an.
Schalten Sie das Elektro-
werkzeug ein und setzen
Sie es mit dem vorderen
Teil des Führungsschlittens
auf das Werkstück. Schie-
ben Sie das Elektrowerk-
zeug mit mäßigem, dem zu
bearbeitenden Material an-
gepasstem Vorschub.
Beim Trennen besonders
harter Werkstoffe, z. B. Beton mit hohem Kieselgehalt, kann
die Diamant-Trennscheibe überhitzen und dadurch beschä-
digt werden. Ein mit der Diamant- Trennscheibe umlaufen-
der Funkenkranz weist deutlich darauf hin.
Unterbrechen Sie in diesem Fall den Trennvorgang und las-
sen Sie die Diamant-Trennscheibe im Leerlauf bei höchster
Drehzahl kurze Zeit laufen, um sie abzukühlen.
Merklich nachlassender Arbeitsfortschritt und ein umlaufen-
der Funkenkranz sind Anzeichen für eine stumpf gewordene
Diamant-Trennscheibe. Sie können diese durch kurze
Schnitte in abrasivem Material, z. B. Kalksandstein, wieder
schärfen.
Trennen von anderen Materialien
u Verwenden Sie beim Trennen von Materialien wie
Kunststoff, Verbundwerkstoffe usw. mit gebundenen
Trennscheiben oder Carbide Multi Wheel Trennschei-
ben immer die Schutzhaube zum Trennen (12) oder
die Schutzhaube zum Schleifen (11) mit montierter
Abdeckung zum Trennen (13). Durch die Verwendung
der Absaughaube mit Führungsschlitten (29) errei-
chen Sie eine bessere Staubabsaugung.
Hinweise zur Statik
Schlitze in tragenden Wänden unterliegen länderspezifi-
schen Festlegungen. Diese Vorschriften sind unbedingt ein-
zuhalten. Ziehen Sie vor Arbeitsbeginn den verantwortlichen
Statiker, Architekten oder die zuständige Bauleitung zurate.
Inbetriebnahme
Ein-/Ausschalten
Schieben Sie zur Inbetriebnahme des Elektrowerkzeuges
den Ein-/Ausschalter (4) nach vorn.
Zum Feststellen des Ein-/Ausschalters (4) drücken Sie den
Ein-/Ausschalter (4) vorn herunter, bis er einrastet.
Um das Elektrowerkzeug auszuschalten, lassen Sie den
Ein-/Ausschalter (4) los bzw. wenn er arretiert ist, drücken
Sie den Ein-/Ausschalter (4) kurz hinten herunter und lassen
ihn dann los.
u Überprüfen Sie die Schleifwerkzeuge vor dem Ge-
brauch. Das Schleifwerkzeug muss einwandfrei mon-
tiert sein und sich frei drehen können. Führen Sie
einen Probelauf von mindestens 1 Minute ohne Belas-
tung durch. Verwenden Sie keine beschädigten, un-
runden oder vibrierenden Schleifwerkzeuge. Beschä-
digte Schleifwerkzeuge können zerbersten und Verletzun-
gen verursachen.
Wartung und Service
Wartung und Reinigung
u Nehmen Sie den Akku vor allen Arbeiten am Elektro-
werkzeug (z.B. Wartung, Werkzeugwechsel etc.) so-
wie bei dessen Transport und Aufbewahrung aus dem
Elektrowerkzeug. Bei unbeabsichtigtem Betätigen des
Ein-/Ausschalters besteht Verletzungsgefahr.
u Halten Sie das Elektrowerkzeug und die Lüftungs-
schlitze sauber, um gut und sicher zu arbeiten.
Lagern und behandeln Sie das Zubehör sorgfältig.
Kundendienst und Anwendungsberatung
Der Kundendienst beantwortet Ihre Fragen zu Reparatur und
Wartung Ihres Produkts sowie zu Ersatzteilen. Explosions-
zeichnungen und Informationen zu Ersatzteilen finden Sie
auch unter: www.bosch-pt.com
Das Bosch-Anwendungsberatungs-Team hilft Ihnen gerne
bei Fragen zu unseren Produkten und deren Zubehör.
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
bitte unbedingt die 10-stellige Sachnummer laut Typen-
schild des Produkts an.
Deutschland
Robert Bosch Power Tools GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Kundendienst: Tel.: (0711)40040480
Unter www.bosch-pt.de können Sie online Ersatzteile be-
stellen oder Reparaturen anmelden.
Anwendungsberatung:
Tel.: (0711)40040480
Fax: (0711)40040482
Bosch Power Tools 1 609 92A 7GR | (13.07.2022)

Chat with your Bosch DIY AdvancedGrind 18V-80 manual using AI

Get instant AI answers from your Bosch DIY AdvancedGrind 18V-80 manual

Ask anything about the Bosch DIY AdvancedGrind 18V-80. Answers come from this manual, with the pages they are based on.

AdvancedGrind 18V-80 Maintenance Schedule

Before each use
Inspect accessory for damage

Check abrasive wheels for chips and cracks, backing pads for wear, and wire brushes for loose wires. Test run for one minute after installation.

Show in the manual (page 20)
Regularly
Clean ventilation slots

Remove dust accumulation from motor vents to prevent electrical hazards caused by the motor fan drawing dust inside.

Show in the manual (page 20)
Regularly
Keep tool and handles clean

Maintain the power tool and ventilation slots clean for safe operation. Keep handles dry, clean, and free of oil and grease.

Show in the manual (page 17)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend AdvancedGrind 18V-80?

Yes No
0
User Pic

Berneice Marquardt

9 months ago

Does the 3Ah battery really last long on the cordless angle grinder, and can I control the speed for safer, battery-friendly use?

0
User Pic

Manual.ly

9 months ago

Yes. Reviews mention that with the 3Ah battery the runtime is surprisingly long for quick cuts and short jobs. The tool also lets you regulate the speed, so you do not have to run it at full power for every task. Using a lower speed can make the grinder easier to handle and help preserve battery capacity, which is especially useful when precision matters or when working for longer periods. Actual runtime depends on the material, blade type, and load, so heavy grinding will reduce runtime compared to lighter cutting.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for cutting, rough grinding, brushing, and sanding tasks on metal and stone. With the right accessory, it can also support surface preparation and rust removal for DIY projects.

Is this answer helpful?

A

Yes. It runs on Bosch 18V batteries, giving you cordless freedom and easier handling in places where a power outlet is not nearby.

Is this answer helpful?

A

Usually, the solo version is sold without a battery and charger. It is meant for users who already have compatible Bosch 18V battery equipment.

Is this answer helpful?

A

Yes, but stone cutting requires the correct cutting guard and enough dust extraction. A diamond cutting disc is typically the best choice for that job.

Is this answer helpful?

A

Key safety features include soft start, restart protection, overload protection, and a protective guard system. These help improve control during startup and use.

Is this answer helpful?

A

Bosch recommends compatible PBA 18V batteries, ideally 4.0 Ah or higher, for better runtime and stronger performance during demanding tasks.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Cordless 18V design improves mobility and makes it easy to work away from mains power.
  • Speed preselection on the AdvancedGrind 18V-80 helps match performance to different materials.
  • Constant electronic control, soft start, and restart protection support smoother, safer operation.
  • Compatible with a range of Bosch PBA 18V batteries and standard M14 accessories.
VS

Disadvantages

  • Solo version usually means battery and charger are not included.
  • Not intended for polishing or hole cutting, so it is not a true all-purpose grinder.
  • Stone cutting requires strong dust extraction and careful setup.
  • Best performance depends on a higher-capacity battery, ideally 4.0 Ah or more.
M: OA-GPT-54-NAN

Product Specification

Type

Angle Grinder

Battery

18V, Li-ion

No-load speed

2800-12000/min

Disc diameter

4.92 in

Tool mounting

Spindle thread M14, Spindle lock

Features

Speed control, Charge level indicator, Constant electronics, Soft grip, Auxiliary handle, Soft start, Restart protection, Vibration damping, Overload protection

Weight

3.75 lb

Scope of delivery

without charger and battery

M: OA-GPT-54-NAN

Product Description

Bosch DIY AdvancedGrind 18V-80 Cordless Angle Grinder Solo Manual

The Bosch DIY AdvancedGrind 18V-80 Cordless Angle Grinder solo Manual is built for makers who want freedom of movement without giving up control. As a cordless 18V grinder, it is aimed at cutting, rough grinding, brushing, and sanding tasks around the workshop, garage, or home renovation space. The solo version is especially practical if you already own compatible Bosch PBA batteries and chargers, letting you expand your tool set without buying duplicates.

What makes this grinder stand out is its balance of power and control. The AdvancedGrind 18V-80 offers speed preselection, so you can match the tool to the material, whether you are removing paint from metal, cleaning rust, or cutting stone with a diamond wheel. A constant electronic system helps keep speed stable under load, while soft start and restart protection improve handling and safety during everyday use.

Bosch also puts a clear focus on comfort. The tool supports a standard or low-vibration auxiliary handle, which helps reduce fatigue during longer sessions. The protective guard system is designed for both grinding and cutting, and the machine uses an M14 spindle with compatible discs and accessories. That makes it a versatile choice for users who want one grinder to cover multiple DIY jobs.

Why it appeals to DIY users

The 125 mm disc size gives a useful working range for common tasks, while the 18V battery platform keeps the tool portable and convenient. With the right accessory, it can handle metal finishing, surface preparation, and cutting jobs with confidence. Bosch recommends a battery of at least 4.0 Ah for strong performance, which is a good reminder that this grinder is made for real work rather than light touch-ups only.

Notes

  • Use the correct guard for grinding or cutting.
  • Always check disc speed rating before installation.
  • Dust extraction is important when cutting stone.
  • Let discs cool before handling after use.
  • For best runtime, use a compatible high-capacity Bosch battery.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly