Manual.ly Logo

Bosch DIY AdvancedAquatak 140 Manual

0.0 · 0 Ratings

PDF manual · 294 Pages

English

M: OA-GPT-54-NAN
page

/ 294

Loading...
bc60732ad9ae673511ce119b89452c6921f2 page c
12 | English
English
Safety Notes
Read all safety warnings
and all instructions. Failure
to follow the safety warnings
and instructions may result in electric
shock, fire and/or serious injury.
The warning and information signs
attached to the unit provide import-
ant information for safe operation.
Apart from the information in the
operating instructions comply with
the general safety regulations and
regulations for the prevention of ac-
cidents.
Explanation of symbols
General hazard safety alert.
Never direct the water jet at
people, animals, the machine
or electric components.
Warning: High pressure jets can be
dangerous if subject to misuse.
According to the applicable
regulations, the appliance
must never be used on the
drinking water network without a
system separator. Use a separator
as per IEC61770 Type BA.
Water flowing though a system sep-
arator is considered not drinkable.
≥100 A
The AdvancedAquatak 140
is intended for use only in
premises having a service cur-
rent capacity ≥100A per phase, sup-
plied from a distribution network hav-
ing a nominal voltage of 230V. If in
doubt please contact your Supply Au-
thority.
Safety Notes for pressure washer
Connecting to the mains
u The voltage of the power source
must correspond with the data on
the type plate of the product.
u We recommend that this product is
only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30mA resid-
ual current.
u The circuit breaker supplying mains
power to the high-pressure washer
should have no less than a C16 rat-
ing. If in doubt consult a qualified
electrician for further advice. Do not
attempt to modify your electrical
system yourself.
u Remove the plug from socket
whenever the machine is left unat-
tended for any period.
u The electric supply installation
should comply with IEC60364-1.
u If the supply cord is damaged, it
must be replaced by the manufac-
turer, its service agent or similarly
qualified persons in order to avoid a
hazard.
F 016 L81 693 | (10.01.2019) Bosch Power Tools

Chat with your Bosch DIY AdvancedAquatak 140 manual using AI

Get instant AI answers from your Bosch DIY AdvancedAquatak 140 manual

Ask anything about the Bosch DIY AdvancedAquatak 140. Answers come from this manual, with the pages they are based on.

AdvancedAquatak 140 Maintenance Schedule

Remind me when maintenance is due
Yearly
Inspect for defects

Regularly check for obvious defects such as loose fixings, worn or damaged components, and ensure covers are undamaged.

Show in the manual (page 11)
After every use
Drain water from hose and pump

Turn off switch and press trigger to drain high-pressure hose. Drain pump by running motor briefly at end of season.

Show in the manual (page 11)
Before each use
Clean water filter

Ensure Bosch inlet filter is clean and fitted before using the machine with alternative water sources or mains water.

As needed
Clean nozzle

Clean nozzle if pressure is low or pulsating due to partial blockage.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend AdvancedAquatak 140?

Yes No

Frequently Asked Questions

A

It is designed for cleaning areas and objects outdoors around the house, including surfaces, tools, vehicles and boats, as long as you use suitable accessories and Bosch-approved cleaning agents.

Is this answer helpful?

A

Yes. The Autostop function switches the motor off when you release the trigger on the spray gun. This helps you pause safely and efficiently without running the pump continuously.

Is this answer helpful?

A

The guidance stresses that you should not connect it directly to the drinking water network without proper backflow protection. A system separator/backflow valve is required so that water passing through is not considered potable.

Is this answer helpful?

A

Use only clean or filtered water for intake. The manual also emphasizes keeping the Bosch inlet filter clean and correctly fitted. Using a dirty or damaged filter can invalidate warranty and reduce performance.

Is this answer helpful?

A

Yes, it supports self-priming. With the self-priming accessory kit, it can draw water from tanks or natural sources, including up to about 0.5 m above the water level. Proper airtight hoses, couplings, and the inlet filter are critical.

Is this answer helpful?

A

Only detergents specifically recommended for pressure washers. Use sparingly and follow the dilution recommendations on the product label. Do not use solvent-containing liquids or undiluted acids.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Strong pressure washer performance for home exterior cleaning
  • Autostop motor shutoff when releasing the trigger improves efficiency
  • Practical cleaning sequence: loosen with fan nozzle, apply detergent, rinse
  • Self-priming support for water tanks and natural sources (with kit)
  • Safety guidance covers electrical and water-connection precautions
VS

Disadvantages

  • Requires careful electrical setup, including RCD-protected connections
  • Needs clean or filtered intake water and a properly maintained inlet filter
  • Hose and nozzle care are essential to prevent loss of pressure
  • High-pressure operation demands two-handed control and PPE awareness
  • Alternative water use depends on the correct self-priming accessories
M: OA-GPT-54-NAN

Product Specification

Operating Mode

Cold Water

Power

2100W

Pressure

2,030.53 psi

Flow Rate

max. 118.88 gal/h

Inlet Temperature

max. 104 F

Mobility

Trolley

Fuel Tank

no

Weight

38.68 lbs

Scope of Delivery

High-pressure gun, High-pressure hose (8m), Lance/Spray wand, Nozzle (Rotary nozzle), Hose reel, Accessory holder, Hose, Water filter

M: GO-GEM-FL-25

Product Description

Bosch DIY AdvancedAquatak 140 Electric high-pressure washer

If you want a reliable way to tackle outdoor grime, the Bosch DIY AdvancedAquatak 140 Electric high-pressure washer is built for everyday cleaning jobs around the home. With a 2.1 kW motor, it delivers strong cleaning performance for patios, garden tools, vehicles and boats, using the right accessories and approved detergents.

What makes this washer a practical choice is how well it supports safe, controlled use. The guidance in the Bosch DIY AdvancedAquatak 140 Electric high-pressure washer Manual emphasizes key precautions such as never aiming the jet at people, using clean or filtered water intake, and protecting electrical connections. You also get an Autostop function that switches the motor off when the trigger is released, helping reduce unnecessary running during breaks.

Cleaning is designed to be straightforward. You can start with the fan nozzle to loosen heavy dirt, then apply detergent using the foam/solution bottle, and finally rinse with the fan nozzle to lift residues away. For vertical surfaces, the recommended approach is to work from the bottom up during cleaning, then rinse from top down.

The AdvancedAquatak 140 can also be used with alternative water sources thanks to its self-priming capability. With the correct self-priming accessory kit, it can draw water from tanks or natural sources up to about 0.5 m above the water level. The manual highlights that the Bosch inlet filter should be clean and correctly fitted, and that hoses and couplings must be airtight to maintain suction performance.

Key results

  • Up to 14 MPa (140 bar class) maximum pressure for removing ground-in outdoor dirt
  • Rated 11 MPa with 6.8 L/min rated flow for steady rinsing power
  • Autostop motor shutoff when the trigger is released for efficient control
  • Self-priming support to draw water from tanks/natural sources with the right kit
  • Safety-focused setup requirements: use filtered water, backflow protection, and RCD protection

Notes

  • For best results, keep the nozzle and water filter clean and avoid running the unit dry.
  • Use only detergents approved for pressure washers and follow the recommended dilution.

Pros and cons

Pros

  • Strong cleaning capability for outdoor surfaces, tools and vehicles
  • Autostop function improves control and reduces wasted power
  • Fan-nozzle and detergent-bottle steps simplify the cleaning workflow
  • Self-priming enables use with tanks or natural water sources
  • Manual-driven safety requirements help prevent common hazards

Cons

  • Not intended for professional use (home and garden focus)
  • Requires correct electrical setup (RCD protection, proper extension cords)
  • Demands clean/filtered water and a correctly seated inlet filter
  • High-pressure jet requires careful handling with protective awareness
  • Accessory kit and correct hoses may be needed for alternative water sources
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly