Manual.ly Logo

Blaupunkt DC-S4B Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
2eba1a26d30e5d5ac7825f82c5afec3c200b page 1
Blaupunkt Competence Center Security
Security Brand Pro GmbH
Mondstrasse 2-4
85622 Feldkirchen, Germany
E-Mail: contact@blaupunkt-sc.com
www.blaupunkt.com/service
Follow the instruction in this document to setup and use the accessory.
For further setting and operation details, please visit the Blaupunkt website
service.blaupunkt-security.com to download the complete manual.
DC-S4 / DC-S4B
White/Brown
EN | Door / Window
Detector
1. LED Indicator / Learn
Button
2. Knockouts
3. Battery Insulator
4. Rib Mark
5. Magnet
6. Tamper
DE | Funk-
Tür/Fenstersensor
1. LED-Anzeige/ Lern-/
Testtaste
2. Aussparungen für Montage
3. Batterieisolator
4. Sensormarkierung
5. Magnet
6. Sabotagekontakt
IT | Sensore Porta / Finestra
1. Indicatore LED / Pulsante
Apprendimento
2. Tamper
3.Fori per Viti
4. Isolante Batteria
5. Segni
6. Magnete
EN
Follow instruction in this document to setup and use the
accessory. For further setting and operation detail, please
visit Blaupunkt website
service.blaupunkt-security.com
to download the complete
manual.
Registration
1. Pull out the battery insulator to activate the battery.
2. For Q Series: Go to the Web Portal
https://eu.bphomeconnect.com/BP/
and login with your
account credentials.
3. Put the Hub into learning mode: Go to Settings Æ Device
and click on the “+” Add device button.
4. Press Learn Button (1) to learn-in the DC-S4. When the
panel receives the “learn signal”, it will emit a double beep
tone and the web interface will display the device info.
5. Check the box in front of the device info, then click OK to
add the device into the system.
6. Input the name of the device (e.g. Door Contact Front
Door) and select the desired zone.
7. To change the attribute of the accessory click on the 3
dots on the right side of this accessory and select the
desired attribute (burglar, Entry, home omit) from the
attribute pull down menu.
Note: For SA series refer to panel manual to learn how to
register a device.
Installation Location
z
Install the main body of the door contact on the
door/window frame, and the magnet on the door/window.
z
Install it on the highest part from the door / window
z
Don’t aim a PIR Movement Detector to this door/window.
z
Don’t install on doors or windows with magnetic surface
as iron or steel.
Installation
1. For screw installation remove the back cover and push
through the 2 knockouts on the back (for example with a
screwdriver) where the plastic is thinner.
2. Drill 2 holes into the surface using the knockouts as
template.
3. Fix the Door Contact back cover onto the surface with the
screws and plugs provided
4. Place the back cover back to the main body and screw it
back.
5. Align the magnet with the Rib Mark from the main body,
the gap between the main body and the magnet should
be no more than 15 mm. Fix the magnet onto the door/
window with the double tape provided.
z
Instead of screw installation, you can also use the
included double side adhesive tape to install the main
body of the door contact.
z
Make sure that the tamper protection is pressed down
against the
door/ window surface, otherwise the
accessory will trigger a tamper alert.
z
This accessory has not supervision mode.
Battery: 1 x 3V CR2032 lithium battery (Pre-inserted)
Radio frequency: 868 MHz
DE
Befolgen Sie die Anweisungen in dieser
Schnellstartanleitung, um das Zubehör einzurichten und zu
nutzen. Weitere Informationen zu den Einstellungen und
zum Betrieb finden Sie auf der Blaupunkt-Website
service.blaupunkt-security.com
, um das vollständige
Handbuch herunterzuladen.
Einlernen des DC-S4 / DC-S4B
1. Ziehen Sie den Batterieisolator heraus, um die Batterie zu
aktivieren.
2. Für die Q-Serie: Rufen Sie das Web Portal
https://eu.bphomeconnect.com/BP/
auf und melden Sie sich
mit Ihren Kontoanmeldeinformationen an.
3. Versetzen Sie das Hub in den Lernmodus: Gehen Sie zu
Einstellungen
Æ Gerät und klicken Sie auf die Schaltfläche
„+“ Gerät hinzufügen.
4. Drücken Sie die Learn-Taste (1), um den DC-S4
einzulernen. Wenn das Panel das „Lernsignal“ empfängt,
ertönt ein doppelter Piepton und das Web Portal zeigt die
Geräteinformationen an.
5. Aktivieren Sie das Kontrollkästchen vor den
Geräteinformationen und klicken Sie auf OK, um das Gerät
dem System hinzuzufügen.
6. Geben Sie den Namen des Geräts ein (z. B. Türkontakt
Eingangstür) und wählen Sie die gewünschte Zone aus.
7. Um das Attribut des Zubehörs zu ändern, klicken Sie auf
die 3 Punkte auf der rechten Seite dieses Zubehörs und
wählen Sie das gewünschte Attribut (Einbruch, Eingang, Zu
Hause aus) aus dem Attribute Menü aus.
Hinweis: Informationen zum einlernen des DC-S4/DC-
S4B in das Panel der SA-Serie finden Sie in der
Bedienungsanleitung der SA-Serie.
Installationsort
z
Montieren Sie das Gehäuse des Türkontakts am Tür- /
Fensterrahmen und den Magneten an der Tür / Fenster.
z
Installieren Sie den Türkontakt am höchsten Punkt der
Tür / des Fensters
z
Richten Sie keinen PIR-Bewegungsmelder auf diese Tür
/ dieses Fenster.
z
Nicht an Türen oder Fenstern mit magnetischer
Oberfläche wie Eisen oder Stahl installieren.
Installation
1. Für die Schraubenmontage entfernen Sie die hintere
Abdeckung und drücken Sie (z. B. mit einem
Schraubendreher) durch die zwei Aussparungen auf der
Rückseite an der Stelle, an der der Kunststoff dünner ist.
2. Bohren Sie 2 Löcher in die Oberfläche. Verwenden Sie
dabei die Aussparungen als Schablone.
3. Befestigen Sie die hintere Abdeckung des Türkontakts
mit den mitgelieferten Schrauben und Dübeln an der
gewünschten Stelle.
4. Setzen Sie die hintere Abdeckung wieder auf das
Hauptgehäuse und schrauben sie dieses fest.
5. Richten Sie den Magneten mit der Rippenmarkierung am
Hauptkörper aus, der Abstand zwischen Hauptkörper und
Magnet sollte nicht mehr als 15 mm betragen.
Befestigen Sie den Magneten mit dem mitgelieferten
Doppelklebeband an der Tür oder am Fenster.
z
Anstelle der Schraubmontage können Sie auch das
mitgelieferte doppelseitige Klebeband verwenden, um
den Türkontakt zu installieren.
z
Stellen Sie sicher, dass der Sabotagekontakt gegen die
Tür- / Fensteroberfläche gedrückt wird. Andernfalls löst
der Türkontakt einen Sabotagealarm aus.
z
Dieses Zubehör hat keinen Überwachungsmodus.
Batterie: 1 x 3V CR2032 Lithiumbatterie
Radiofrequenz: 868 MHz
IT
Follow instruction in this document to setup and use the
accessory. For further setting and operation detail, please visit
Blaupunkt website
service.blaupunkt-security.com
to download the complete
manual.
Registration
1. Pull out the battery insulator to activate the battery.
2. Per la serie Q: Go to the Web Portal
https://eu.bphomeconnect.com/BP/
and login with your
account credentials.
3. Put the Hub into learning mode: Go to Settings
Æ Device
and click on the “+” Add device button.
4. Press Learn Button (1) to learn-in the DC-S4. When the
panel receives the “learn signal”, it will emit a double beep
tone and the web interface will display the device info.
5. Check the box in front of the device info, then click OK to
add the device into the system.
6. Input the name of the device (e.g. Door Contact Front
Door) and select the desired zone.
7. To change the attribute of the accessory click on the 3 dots
on the right side of this accessory and select the desired
attribute (burglar, Entry, home omit) from the attribute pull
down menu.
Nota: per le serie SA fare riferimento al manuale del
pannello per informazioni su come registrare un
dispositivo.
Installation Location
z
Install the main body of the door contact on the
door/window frame, and the magnet on the door/window.
z
Install it on the highest part from the door / window
z
Don’t aim a PIR Movement Detector to this door/window.
z
Don’t install on doors or windows with magnetic surface
as iron or steel.
Installation
1. For screw installation remove the back cover and push
through the 2 knockouts on the back (for example with a
screwdriver) where the plastic is thinner.
2. Drill 2 holes into the surface using the knockouts as
template.
3. Fix the Door Contact back cover onto the surface with the
screws and plugs provided
4. Place the back cover back to the main body and screw it
back.
5. Align the magnet with the Rib Mark from the main body, the
gap between the main body and the magnet should be no
more than 15 mm. Fix the magnet onto the door/ window
with the double tape provided.
z
Instead of screw installation, you can also use the
included double side adhesive tape to install the main
body of the door contact.
z
Make sure that the tamper protection is pressed down
against the door/ window surface, otherwise the
accessory will trigger a tamper alert.
z
This accessory has not supervision mode.
Battery: 1 x 3V CR2032 lithium battery (Pre-inserted)
Radio frequency: 868 MHz

Chat with your Blaupunkt DC-S4B manual using AI

Get instant AI answers from your Blaupunkt DC-S4B manual

Ask anything about the Blaupunkt DC-S4B. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend DC-S4B?

Yes No

Frequently Asked Questions

A

Go to Web Portal, login, set hub to learning mode, press learn button, check box and click OK.

Is this answer helpful?

A

It uses one 3V CR2032 lithium battery which is pre-inserted inside the unit.

Is this answer helpful?

A

The distance should be no more than fifteen millimeters for correct operation.

Is this answer helpful?

A

No, do not install on doors or windows with magnetic surface as iron or steel.

Is this answer helpful?

A

No, this accessory does not have a supervision mode enabled.

Is this answer helpful?

A

The radio frequency is set to 868 MHz for wireless communication.

Is this answer helpful?

A

Pull out the battery insulator to activate the battery after unpacking.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Easy installation with screws or adhesive tape option.
  • Wireless operation using 868 MHz frequency for reliable connectivity.
  • Tamper protection feature triggers alerts if device is removed.
  • Long-lasting 3V CR2032 battery included for power stability.
  • Compatible with Q Series hubs for centralized management.
VS

Disadvantages

  • Lacks supervision mode which limits real-time fault detection.
  • Magnet gap must not exceed fifteen millimeters for proper function.
  • Cannot be installed on doors with magnetic surfaces like iron.
  • SA Series panels require specific manual checks for pairing.
  • Tamper alert triggers if protection switch is not pressed down.
M: QW-35-FL

Product Specification

Type

Sensor

Protocol

Wireless Bus (868 MHz)

Function

Opening/Closing Sensor

Topology

Mesh

Dimensions

3.11x1.12x0.77in

Features

Battery powered (CR2032), controllable via App (Android, iOS)

M: QW-35-FL

Product Description

Secure Your Property with Modern Technology

Comprehensive Home Protection

Maintaining a secure environment is essential for modern living. Families need reliable tools to monitor entry points effectively. The Blaupunkt DC-S4B Wireless Door/Window Contact Brown offers a robust solution for detecting openings. It integrates seamlessly into existing security ecosystems to provide real-time alerts. Detailed usage instructions are often available via the Blaupunkt DC-S4B Wireless Door/Window Contact Brown, Lock/Opening Sensor Manual.

Flexible Installation Options

Users appreciate the versatility this product offers during setup. The main unit fits securely on the window or door frame. A separate magnet component attaches to the moving part of the structure. You have the choice between using provided screws or adhesive tape. This flexibility accommodates various surfaces and material types. Ensure the back cover is screwed down to press the tamper protection. Failure to press the protection against the surface triggers a sabotage alert. Keep the gap between the sensor and magnet under fifteen millimeters for optimal performance. During the registration phase, check your zone selection carefully. Make sure the tamper protection switch stays engaged against the wall.

Wireless Connectivity and Power

This device operates wirelessly using an 868 MHz radio frequency. It eliminates the need for complex wiring during the installation process. Power is supplied by a single 3V CR2032 lithium battery. The battery comes pre-inserted with a safety insulator for storage. Removing the insulator activates the unit for immediate use. This power source is durable and ensures the sensor remains active for an extended period. The device confirms successful pairing when the panel emits a double beep tone. Regular checks ensure the battery and alignment remain functional. High visibility LED indicators help track status easily.

Smart Management Capabilities

Integration with home hubs allows for advanced customization. Log into the Web Portal to register the sensor under your account. You can assign specific zone names to identify the location clearly. Attributes such as burglar alarm or entry zone can be selected via the menu. For those using the Q Series, settings are managed online. If using SA Series panels, refer to the respective panel manual for pairing steps. Remember that there is no supervision mode for this specific accessory. Avoid placing the sensor on magnetic surfaces like steel or iron doors. Also, ensure no PIR movement detectors are aimed directly at this location to prevent interference. The 3 dots menu allows attribute changes.

Final Thoughts on Safety

Security systems rely on accurate sensors to protect property. Installing this contact correctly guarantees reliability. This product stands out for its ease of use and effective monitoring capabilities. Proper placement avoids false alarms and ensures consistent performance.

M: QW-35-FL

© Copyright 2026 Manual.ly