Bitspower Lotan MSI GeForce RTX 2080 Gaming X TRIO Manual
PDF manual · 4 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Bitspower Lotan MSI GeForce RTX 2080 Gaming X TRIO manual using AI
Get instant AI answers from your Bitspower Lotan MSI GeForce RTX 2080 Gaming X TRIO manual
Ask anything about the Bitspower Lotan MSI GeForce RTX 2080 Gaming X TRIO. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Lotan MSI GeForce RTX 2080 Gaming X TRIO?
Yes NoFrequently Asked Questions
It is designed for the MSI GeForce RTX 2080 Gaming X Trio. Confirm the exact graphics card model and PCB layout before installation, as water block fitment is model-specific.
Is this answer helpful?
The listed accessories include 1 mm thermal pads, M2.5 x 6 mm screws, M2.5 x 8 mm screws, M3 x 8 mm screws, M2.5 nuts, a Bitspower baffle, and a booster screw. Included items may change with product revisions.
Is this answer helpful?
No. The installation instructions describe an original backplate mounting option, but the original backplate is listed as not included.
Is this answer helpful?
Connect the acrylic DRGB decorative module to a compatible digital RGB header on the motherboard or another DRGB-capable control device. Check header type and pin alignment before connecting it.
Is this answer helpful?
A 24-hour leak test with only the pump powered helps detect leaks before the full PC is turned on. This reduces the risk of liquid damaging graphics cards, motherboards, and other components.
Is this answer helpful?
Bitspower recommends distilled or purified water combined with Bitspower dye. Using unsuitable coolant can create deposits, restrict water channels, affect pump operation, or contribute to seal and coating problems.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Designed specifically for the MSI GeForce RTX 2080 Gaming X Trio layout.
- Includes thermal pads, mounting screws, nuts, baffle, and a booster screw.
- Supports an acrylic DRGB decorative module for compatible digital RGB headers.
- Provides guidance for thermal pad placement, thermal paste use, and 24-hour leak testing.
Disadvantages
- Compatibility is limited to the specified MSI RTX 2080 Gaming X Trio card layout.
- Original backplate installation is supported, but the backplate is not included.
- Custom-loop installation requires careful assembly, coolant selection, and leak testing.
- DRGB lighting requires a compatible motherboard or external DRGB device.
Product Specification
Type
GPU
Material
Copper (nickel-plated), PMMA
Compatibility
MSI GeForce RTX 2080 SUPER Gaming X Trio, MSI GeForce RTX 2080 Gaming X Trio, MSI GeForce RTX 2070 SUPER Gaming X Trio
Connections
G1/4"
Lighting
LED (RGB)
Dimensions (L x W x H)
11.97 x 1.18 x 6.06 in
Special features
Voltage regulator cooling (GPU)
Product Description
Bitspower Lotan VGA Water Block MSI GeForce RTX 2080 Gaming X TRIO - Read, Download & Print Free
The Bitspower Lotan VGA Water Block MSI GeForce RTX 2080 Gaming X TRIO is designed for enthusiasts building a custom liquid-cooling loop around MSI's GeForce RTX 2080 Gaming X Trio graphics card. It replaces the stock air cooler with a dedicated water-cooling solution intended to transfer heat away from the GPU and supporting board components through a properly assembled loop. For performance-focused gaming systems, showcase PCs, and carefully planned overclocking builds, this block provides a purpose-built route toward cleaner thermal management.
Built for a Specific Graphics Card Layout
Compatibility is the key consideration with any full-coverage graphics card water block. This model is made for the MSI GeForce RTX 2080 Gaming X Trio PCB layout, so builders should verify their exact card before installation. The included thermal pads, thermal paste application guidance, screws, nuts, baffle, and booster screw support the mounting process. The instructions also describe an optional installation approach using the original backplate, which is not supplied with the block.
Correct thermal interface placement is essential. The installation guidance calls for 1 mm thermal pads in designated positions and an appropriate amount of thermal paste on the GPU. Careful preparation, measured screw tightening, and checking component alignment help create reliable contact across the card's cooling points.
DRGB Styling for a Custom Loop
An acrylic DRGB decorative module adds a visual element to the cooling setup. It connects to a compatible digital RGB header on a motherboard or other DRGB-capable device, allowing the water block to complement coordinated lighting throughout a custom PC. This feature is especially useful for builders who want the graphics card to remain a visible centerpiece rather than a hidden functional component.
Installation and Loop Care Notes
A custom loop requires deliberate setup and routine attention. Before powering the complete computer, perform a 24-hour leak test with only the pump connected to power. This helps identify loose fittings, seal issues, or assembly mistakes before liquid can reach sensitive hardware. Do not operate the pump with an empty reservoir.
For coolant preparation, Bitspower recommends distilled or purified water with Bitspower dye. Other liquids may leave residue, block channels, affect pump operation, damage coatings, or deform sealing rings. Product colors, included accessories, and design details may vary as the manufacturer updates the product.
Notes
- Confirm exact MSI RTX 2080 Gaming X Trio compatibility before removing the original cooler.
- The original backplate is referenced for installation but is not included.
- Plan cable routing for the DRGB connection before final assembly.
Search for 67,706 Manuals online
Type-in Brand or Model