Manual.ly Logo

Bitspower BP-MVV Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: OA-GPT-54-NAN
page

/ 1

Loading...
3b318b4b3f69ef9dea66ed96c20e0d801322 page 1
V1/第一版
BP-MVV
注意,跑水前,請先確認所有零件已安裝在正確的位置上,在不開主機,單開水泵的情况下,進行24小時的跑水測試, 確保無漏水情况後再開主機,避免發生漏水而導致電腦零件的損壞。
注意,跑水前,请先确认所有零件已安装在正确的位置上,在不开主机,单开水泵的情况下,进行24小时的跑水测试, 确保无漏水情况后再开主机,避免发生漏水而导致电脑零件的损坏。
Before fill in water,please make sure all the component be installed correctly,avoidingleaking happen and destroy the PC component.
產品使用說明/Product instructions/产品使用说明
Bitspower Mini Valve With Black Handle
ON OFF
ON
OFF
Turn right
★請勿旋轉超過90度
★请勿旋转超过90度
★Don't rotate over 90 degrees.
0º
90º
在您第一次使用時,請在 開/關 止水閥手柄前運行 水冷液/水
一段時間。並多旋轉幾次,它會使手柄更容易旋轉到0或90度
整。勿使用任何工具或過度的外力旋轉手柄。
At your first using, please run coolant/water for a while before
you turn on/off the handle of vavle. And rotate it several times;
it will make the handle easier to rotate to 0/90 degrees. Do not
use any tooling or haevy force to turn the handle.
在您第一次使用时,请在 开/关 止水阀手柄前运行 水冷液/水
一段时间。并多旋转几次,它会使手柄更容易旋转到0或90度
整。勿使用任何工具或过度的外力旋转手柄。

Chat with your Bitspower BP-MVV manual using AI

Get instant AI answers from your Bitspower BP-MVV manual

Ask anything about the Bitspower BP-MVV. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend BP-MVV?

Yes No

Frequently Asked Questions

A

It provides a simple way to stop or allow coolant flow in a custom water-cooling loop. This makes maintenance, draining, and system adjustments easier without changing the entire setup.

Is this answer helpful?

A

The handle should be moved gently between open and closed positions, and it should not be rotated beyond 90 degrees. The design is meant for controlled, limited-turn operation.

Is this answer helpful?

A

Yes. The guidance suggests running water or coolant through it first and rotating it several times. This helps the handle feel smoother and easier to use over time.

Is this answer helpful?

A

No. The instructions say not to use tools or heavy force. The valve should be operated by hand to avoid damage and keep the movement precise.

Is this answer helpful?

A

Absolutely. The recommended practice is to run the pump alone for about 24 hours and check for leaks before turning on the main system. This helps protect PC components from water damage.

Is this answer helpful?

A

It is best suited for custom liquid-cooling PC builds that need a compact, reliable shut-off point. Its black finish also makes it a good match for clean, understated systems.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Compact shut-off control for custom water-cooling loops.
  • Black finish fits clean, modern PC builds.
  • Quarter-turn style makes flow control quick and simple.
  • Helpful for maintenance, draining, and leak testing setups.
VS

Disadvantages

  • Handle should not be rotated beyond 90 degrees.
  • Requires careful first-use break-in for smooth operation.
  • Excessive force or tools can damage the valve.
  • Proper installation and leak testing are essential before use.
M: OA-GPT-54-NAN

Product Specification

Type

Shut-off valve

Material

Brass (nickel-plated)

Connections (male)

1x G1/4"

Connections (female)

1x G1/4"

Angle

0°

Color

black (matte)

Special features

knurled (diamond), rotatable

M: OA-GPT-54-NAN

Product Description

Bitspower G1/4" MF Shut-Off Valve, Black: Precise Flow Control for Custom Loops

The Bitspower G1/4" mf shut-off valve in black is a compact but highly practical piece of hardware for water-cooling enthusiasts who value control, reliability, and a clean aesthetic. Designed to sit neatly inside a custom loop, this mini valve gives you a simple way to open or stop coolant flow without disrupting the rest of your build. Its black finish keeps the look understated, making it easy to blend into modern systems where both performance and appearance matter.

Built for everyday use

What makes this valve especially useful is its straightforward operation. The handle is designed to move between open and closed positions with a quarter-turn motion, so it is easy to understand and quick to use. The manual also emphasizes a few important habits: do not rotate the handle beyond 90 degrees, do not force it with tools, and avoid applying excessive pressure. These small precautions help preserve smooth operation and extend the life of the fitting.

A helpful part for safer maintenance

In a custom cooling setup, convenience matters just as much as performance. A shut-off valve can make draining, servicing, and testing a loop far easier. The instructions also recommend running coolant or water through the valve before first use and rotating it several times so the handle becomes smoother over time. That small break-in step can improve the feel of the valve and make future adjustments more precise.

Installation and leak-testing mindset

The product guidance highlights an important rule for any liquid-cooled PC: always confirm that every component is installed correctly before powering the system. A 24-hour leak test with only the pump running is strongly recommended before turning on the main machine. This is a smart reminder that even a premium valve is only one part of a complete cooling system, and careful testing helps protect valuable hardware from water damage.

Why it appeals to builders

For builders who want a neat, functional control point in their loop, this valve offers a balanced mix of form and function. The G1/4" threading makes it compatible with many water-cooling configurations, while the black finish supports a clean, professional look. Whether used for routine maintenance or as part of a more advanced loop layout, it is the kind of component that quietly improves the overall experience.

Notes

  • Turn the handle gently and only within the intended range.
  • Break in the valve before relying on it for frequent use.
  • Always perform a leak test before powering the PC.
  • Use it as a control component, not as a forced connection point.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly