Manual.ly Logo

Benning MM 5-2 Manual

5.0 · 2 Ratings

PDF manual · 137 Pages

English

M: OA-GPT-54-NAN
page

/ 137

Loading...
2083a976124782a48d4f9f4f459f36d151eb page 14
05/ 2018
BENNING MM 5-1/ 5-2
20
Operating Manual
BENNING MM 5-1/ MM 5-2
Digital Multimeter for
- DC voltage measurement
- AC voltage measurement
- DC current measurement (BENNING MM 5-2)
- AC current measurement (BENNING MM 5-2)
- Resistance measurement
- Diode testing
- Continuity testing
- Capacity measurement
- Frequency measurement
- Temperature measurement (BENNING MM 5-2)
Contents:
1. Operating instructions
2. Safety notes
3. Scope of delivery
4. Description of unit
5. General data
6. Ambient conditions
7. Electrical data
8. Measuring with the BENNING MM 5-1/ MM 5-2
9. Maintenance
10. How to use the protective rubber holster
11. Technical data of the measuring accessories
12. Environmental note
1. Operating Instructions
This operating manual is intended for:
- electricians and
- qualified electrotechnical persons
The BENNING MM 5-1/ MM 5-2 is designed for measurements in dry surround-
ings. It must not be used in electrical circuits with rated voltages higher than
600 V DC/ AC (for more details, see section 6 “Ambient conditions”).
The following symbols are used in the operating manual and on the
BENNING MM 5-1/ MM 5-2 itself:
Attention! Magnets might affect the correct functioning of cardiac
pacemakers and implanted defibrillators. As a user of such medical
devices, keep a sufficient distance to the magnet.
Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!
The symbol indicates that the information provided in the operating
instructions must be followed with in order to avoid risks.
This symbol on the BENNING MM 5-1/ MM 5-2 indicates that the
unit is protection insulated (safety class II).
This symbol on the BENNING MM 5-2 indicates the fuses which
it contains.
This symbol on the BENNING MM 5-1/ MM 5-2 means that the
BENNING MM 5-1/ MM 5-2 complies with the EU directives.
This symbol appears on the display for a discharged battery.
This symbol indicates the “continuity-testing” application. The
buzzer provides an audible signal.
This symbol indicates the “diode-testing” application.
This symbol marks the range “capacity testing”.
(DC) voltage or current.
(AC) voltage or current.
Earth (voltage to earth).

Chat with your Benning MM 5-2 manual using AI

Get instant AI answers from your Benning MM 5-2 manual

Ask anything about the Benning MM 5-2. Answers come from this manual, with the pages they are based on.

MM 5-2 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the multimeter

Send the device to Benning Service Center for recalibration to maintain specified accuracy.

Show in the manual (page 17)
As needed
Replace batteries

Replace batteries when all segments of the battery symbol disappear and the symbol flashes.

Show in the manual (page 17)
As needed
Replace fuse

Replace the 15 A fuse in the BENNING MM 5-2 if it blows due to overload.

Show in the manual (page 17)
Regularly
Clean the housing

Wipe the housing externally with a clean dry cloth. Do not use solvents or abrasives.

Show in the manual (page 17)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend MM 5-2?

Yes No
0
User Pic

Marta Keller

9 months ago

Is the Benning MM 5-2 digital multimeter reliable and safe to use, and does it have VDE safety marking?

0
User Pic

Manual.ly

9 months ago

Yes. Reviewers highlight the device as reliable and especially safe for electrical work, with the important VDE marking noted. The multimeter is described as compact (about 15 cm), with a stable housing and a well-readable LCD display with backlight. For practical and safer handling, it comes with a set of safety measuring leads and includes accessories like a storage case, batteries, temperature probe, and a rubber holster with an integrated magnet for easy positioning at the test point (for example on a distribution box). It also offers useful protections like automatic switch-off after about 20 minutes to help prevent unintended battery drain.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It measures DC and AC voltage, DC and AC current, resistance, continuity, diode response, capacitance, frequency, and temperature. That makes it suitable for a wide range of electrical and service tasks.

Is this answer helpful?

A

It is designed for CAT III 600 V and CAT IV 300 V applications when used with suitable leads and caps. Always follow the safety limits and check the setup before measuring.

Is this answer helpful?

A

Smart HOLD freezes the current reading on screen. It is useful when you need to remove the probes or note the value without watching the display continuously.

Is this answer helpful?

A

Yes, the MM 5-2 includes temperature measurement with a K-type sensor. This feature is useful for HVAC checks, equipment monitoring, and general troubleshooting.

Is this answer helpful?

A

VoltSensor detects AC voltage without direct contact. It is helpful for quick phase checks and locating live lines, but it should not be used to prove a circuit is dead.

Is this answer helpful?

A

Replace the batteries when the battery symbol flashes and all segments are gone. Waiting too long can lead to incorrect readings and unsafe operation.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 6000-count True RMS display improves readability and accuracy on complex signals.
  • Broad measurement range covers voltage, current, resistance, continuity, diode, capacitance, frequency, and temperature.
  • Smart HOLD, PEAK, backlight, and VoltSensor features make field testing faster and easier.
  • Protective rubber holster with magnet adds durability and convenient hands-free positioning.
VS

Disadvantages

  • Designed for dry environments only, so it is not ideal for damp or wet conditions.
  • 10 A current measurement is time-limited and requires careful use to avoid overload.
  • Temperature testing is available only on the MM 5-2 model, not the MM 5-1.
  • Battery and fuse replacement are part of normal long-term maintenance.
M: OA-GPT-54-NAN

Product Specification

Measurement Range

max. 10A, max. 600V, max. 40MΩ

Scope of delivery

Case, Test leads

M: OA-GPT-54-NAN

Product Description

Benning MM 5-2 Multimeter: A Compact Tool Built for Real-World Electrical Testing

The Benning MM 5-2 is a digital multimeter made for electricians and technically trained users who need dependable measurements in daily service work. It is built for dry environments and supports a wide range of tasks, from basic voltage checks to more advanced diagnostics. If you are looking for the Benning MM 5-2 Multimeter Manual, the main idea is simple: this meter focuses on safety, clarity, and practical use.

One of its strongest points is versatility. The device handles DC and AC voltage, DC and AC current, resistance, continuity, diode testing, capacitance, frequency, and temperature measurement. That makes it useful in installation work, troubleshooting, maintenance, and component testing. The True RMS reading helps improve accuracy when signals are not perfectly sinusoidal, which is especially helpful in modern electrical systems.

The user experience is also well thought out. The 6000-count display is easy to read, the automatic range selection reduces setup effort, and the Smart HOLD function freezes readings for easier documentation. The PEAK function adds another layer of convenience when brief spikes matter. A yellow backlight button improves visibility, while the VoltSensor feature allows non-contact AC voltage detection against earth.

Safety is a major theme throughout the design. The meter is rated for CAT III 600 V and CAT IV 300 V applications, and the supplied leads are designed to match those categories. The rubber holster adds mechanical protection, supports angled standing, and includes a magnet for hands-free placement. That makes the unit feel ready for field use rather than just bench work.

The MM 5-2 also stands out with practical maintenance features. Battery status is shown on the display, the fuse is user-replaceable, and the compact size keeps it easy to carry. With the included K-type temperature probe, it becomes a more complete diagnostic tool for HVAC, electrical, and general technical work. Overall, the Benning MM 5-2 blends portability, safety, and multi-function testing into a single professional instrument.

Notes

  • Best suited for dry, controlled work areas.
  • Temperature measurement is available only on the MM 5-2.
  • Always use the correct leads and CAT caps for higher categories.
  • Replace batteries or fuse promptly when warnings appear.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly