Manual.ly Logo

Benning MM 2 Manual

4.8 · 4 Ratings

PDF manual · 112 Pages

English

M: OA-GPT-54-NAN
page

/ 112

Loading...
be54304cf884d0776ebc9bb38690fef24e8e page f
01/ 2015
BENNING MM 2
8
D
9.5 Kalibrierung
Um die angegebenen Genauigkeiten der Messergebnisse zu erhalten, muss
das Gerät regelmäßig durch unseren Werksservice kalibriert werden. Wir
empfehlen ein Kalibrierintervall von einem Jahr. Senden Sie hierzu das Gerät
an folgende Adresse:
Benning Elektrotechnik & Elektronik GmbH & Co. KG
Service Center
Robert-Bosch-Str. 20
D - 46397 Bocholt
9.6 Ersatzteile
Sicherung F 16 A, 500 V, D = 6,35 mm, L = 32 mm, T.Nr. 749770
Sicherung F 1 A, 500 V, D = 6,35 mm, L = 32 mm, T.Nr. 749669
10. Anwendung des Gummi-Schutzrahmens
- Sie können die Sicherheitsmessleitungen verwahren, indem Sie die
Sicherheitsmessleitungen um den Gummi-Schutzrahmen wickeln und
die Spitzen der Sicherheitsmessleitungen geschützt an den Gummi-Schutz-
rahmen anrasten (siehe Bild 11).
- Sie können eine Sicherheitsmessleitung so an den Gummi-Schutzrahmen
an rasten, dass die Messspitze freisteht, um die Messspitze gemeinsam
mit dem BENNING MM 2 an einen Messpunkt zu führen.
- Die rückwärtige Stütze am Gummi-Schutzrahmen ermöglicht, den
BENNING MM 2 schräg aufzustellen (erleichtert die Ablesung) oder aufzu-
hängen (siehe Bild 12).
- Der Gummi-Schutzrahmen besitzt eine Öse, die für eine Auf hänge mög-
lichkeit genutzt werden kann.
siehe Bild 11: Aufwicklung der Sicherheitsmessleitung
siehe Bild 12: Aufstellung des BENNING MM 2
11. Technische Daten des Messzubehörs
- Norm: EN 61010-031,
- Maximale Bemessungsspannung gegen Erde ( ) und Messkategorie:
Mit Aufsteckkappe: 1000 V CAT III, 600 V CAT IV,
Ohne Aufsteckkappe: 1000 V CAT II,
- Maximaler Bemessungsstrom: 10 A,
- Schutzklasse II (
), durchgängige doppelte oder verstärkte Isolierung,
- Verschmutzungsgrad: 2,
- Länge: 1,4 m, AWG 18,
- Umgebungsbedingungen:
Barometrische Höhe bei Messungen: Maximal 2000 m,
Temperatur: 0°C bis + 50 °C, Feuchte 50 % bis 80 %
- Verwenden Sie die Messleitungen nur im einwandfreien und sauberen
Zustand sowie entsprechend dieser Anleitung, da ansonsten der vorgese-
hene Schutz beeinträchtigt sein kann.
- Sondern Sie die Messleitung aus, wenn die Isolierung beschädigt ist oder
eine Unterbrechung in Leitung/ Stecker vorliegt.
- Berühren Sie die Messleitung nicht an den blanken Kontaktspitzen. Fassen
Sie nur den Handbereich an!
- Stecken Sie die abgewinkelten Anschlüsse in das Prüf- oder Messgerät.
12. Umweltschutz
Bitte führen Sie das Gerät am Ende seiner Lebensdauer den zur
Verfügung ste hen den Rückgabe- und Sammelsystemen zu.

Chat with your Benning MM 2 manual using AI

Get instant AI answers from your Benning MM 2 manual

Ask anything about the Benning MM 2. Answers come from this manual, with the pages they are based on.

MM 2 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the instrument

Send the device to factory service to maintain specified accuracy. Address: Benning Elektrotechnik & Elektronik GmbH & Co. KG Service Center Robert-Bosch-Str. 20 D - 46397 Bocholt.

Show in the manual (page 15)
When needed
Replace battery

Replace the 9 V block battery when the low battery indicator appears on the display.

Show in the manual (page 15)
When needed
Replace fuses

Replace blown fuses with 1 A or 16 A fast blow fuses (part no. 749669 or 749770) after turning off power and removing test leads.

Show in the manual (page 15)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend MM 2?

Yes No
0
User Pic

Laura König

9 months ago

Is the multimeter scale or measurement range labeling easy to read, or is it hard to see the markings in practice?

0
User Pic

Manual.ly

9 months ago

Thanks for the question. If the measurement range markings are difficult to read (for example, low contrast like black text on a red background), please check the display and range area in bright lighting and confirm you are viewing the correct scale for your selected function. Also verify that the device is set to the intended measurement mode before measuring. If the labeling is unusually unclear due to printing quality, we recommend contacting support with a photo of the scale so we can help with troubleshooting or arrange a replacement under our warranty. Many issues are resolved with a quick check of the mode and lighting, but defective labels can be replaced.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It measures DC and AC voltage, DC and AC current, resistance, continuity, and diodes. This makes it suitable for many everyday electrical checks and basic troubleshooting jobs.

Is this answer helpful?

A

Yes, it is designed with electrical safety in mind and built for trained users. It includes double insulation, fuse protection, and category-rated measurement guidance, but it must be used correctly.

Is this answer helpful?

A

Yes, it supports up to 1000 V DC and 750 V AC in the specified ranges. However, users must follow the stated category limits and use suitable test leads.

Is this answer helpful?

A

Yes, the meter includes an audible continuity test. It sounds when resistance is low enough, which helps speed up cable and connection checks.

Is this answer helpful?

A

It uses a 3½-digit LCD display with automatic decimal placement, polarity indication, and overrange alerts. The screen is designed for quick reading during field work.

Is this answer helpful?

A

The unit runs on a 9 V block battery. A low-battery symbol appears on the display when replacement is needed.

Is this answer helpful?

A

Yes, regular calibration is recommended to maintain measurement accuracy. Annual recalibration is suggested for users who rely on precise results.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Covers the most important electrical measurements in one compact tool.
  • Clear 3½-digit display with automatic polarity and overrange indication.
  • Strong safety focus with double insulation, fuses, and CAT-rated lead support.
  • Rubber holster improves protection and makes bench use more convenient.
VS

Disadvantages

  • Not intended for wet environments, so it is limited to dry-use applications.
  • 20 A current testing is only suitable for short-duration measurements.
  • Basic feature set may be too simple for advanced diagnostic tasks.
  • Accuracy depends on periodic calibration and proper lead condition.
M: OA-GPT-54-NAN

Product Specification

Measurement range

max. 1000V, max. 20MΩ

Scope of delivery

Bag, Test leads

M: OA-GPT-54-NAN

Product Description

Benning MM 2 Multimeter: a compact tester for everyday electrical work

The Benning MM 2 Multimeter is a practical digital measuring tool built for technicians, electricians, and informed DIY users who need dependable readings in a wide range of basic electrical tasks. It covers the essentials with DC and AC voltage measurement, DC and AC current measurement, resistance checks, continuity testing, and diode testing, making it a versatile companion for troubleshooting circuits.

What stands out first is the balance between simplicity and professional-level safety. The layout is straightforward, with a clear digital display, automatic polarity indication, and a rotary selector that makes range changes quick and intuitive. The included safety leads, fuse protection, and double-insulated housing show that the device is designed with careful field use in mind, especially in dry environments where reliable test results matter.

The Benning MM 2 Multimeter Manual highlights a device that is not overly complex, but still detailed enough for precise work. It offers a 3½-digit LCD with a maximum display of 1999, automatic switch-off, and battery status indication. Those details may seem small, but they make daily use more efficient and help reduce mistakes during testing. The rubber holster adds another layer of protection and also lets the meter stand upright or hang for easier reading.

In real-world use, the meter is suited to common electrical checks in installations, maintenance work, and component diagnostics. Voltage ranges extend up to 1000 V DC and 750 V AC, while current measurement reaches up to 20 A for short periods. Resistance ranges go as high as 20 MΩ, and the continuity buzzer is especially useful when checking cables, switches, and connections quickly.

Notes

  • Best used in dry conditions
  • Designed for trained users and electricians
  • Requires proper fuse and battery care
  • Regular calibration helps preserve accuracy

Overall, the Benning MM 2 is a no-nonsense multimeter that focuses on safety, readability, and core measurement functions. It is a solid choice for users who want a reliable everyday instrument without unnecessary complexity.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly