Manual.ly Logo

Benning MM 12 Manual

4.0 · 3 Ratings

PDF manual · 34 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 34

Loading...
562f1a01bb6af444b57a94a9a83ae1775d6e page 21
07/ 2016
BENNING MM 12
33
- Push the new fuse into the centre of the holder.
- Lock the battery compartment cover into place on the bottom part and tighten the screw.
- Place the BENNING MM 12 into the rubber protection frame
O
.
See figure 13: Fuse replacement
9.5 Calibration
Benning guarantees compliance with the technical and accuracy specifications stated in the
operating manual for the first 12 months after the delivery date.
To maintain the specified accuracy of the measurement results, the instrument must be
recalibrated at regular intervals by our factory service. We recommend a recalibration interval of
one year. Send the multimeter to the following address:
Benning Elektrotechnik & Elektronik GmbH & CO. KG
Service Centre
Robert-Bosch-Str. 20
D - 46397 Bocholt
9.6 Spare parts
Fuse F 440 mA, 1000 V, 10 kA, D = 10 mm, L = 34.9 mm, P.no. 10016655
Fuse F 11 A, 1000 V, 20 kA, D = 10.3 mm, L = 38.1 mm, P.no. 10016656
10. How to use the protective rubber holster
- The safety measuring leads can be stored by coiling them round the protective rubber
holster
O
and clipping the probe into the holster
O
so that they are sufficiently protected
(see fig. 14).
- You can clip one lead onto the protective rubber holster
O
in such a way that the measuring
probe projects. This allows you to bring the measuring probe and the BENNING MM 12 up
to the measuring point together.
- The support at the back of the holster
O
can be used to prop the BENNING MM 12 up in
a diagonal position (to make reading easier) or to suspend it (see fig. 15).
- The protective rubber holster
O
has an eyelet for suspending the unit in a convenient posi-
tion.
See figure 14: Winding up the safety measuring leads
See figure 15: Standing up the BENNING MM 12
11. Technical data of the measuring accessories
- Standard: EN 61010-031,
- Maximum rated voltage to earth () and measuring category:
With push-on caps: 1000 V CAT III, 600 V CAT IV,
Without push-on caps: 1000 V CAT II,
- Maximum rated current: 10 A,
- Protective class II (), continuous double or reinforced insulation,
- Contamination class: 2,
- Length: 1.4 m, AWG 18,
- Environmental conditions:
Maximum barometric elevation for making measurements: 2000 m,
Temperatures: 0 °C to + 50 °C, humidity 50 % to 80 %
- Only use the measuring leads if in perfect and clean condition as well as according to this
manual, since the protection provided could otherwise be impaired.
- Throw the measuring lead out if the insulation is damaged or if there is a break in the lead/
plug.
- Do not touch the bare contact tips of the measuring lead. Only grab the area appropriate
for hands!
- Insert the angled terminals in the testing or measuring device.
12. Environmental notice
At the end of the product’s useful life, please dispose of it at appropriate collection
points provided in your country.

Chat with your Benning MM 12 manual using AI

Get instant AI answers from your Benning MM 12 manual

Ask anything about the Benning MM 12. Answers come from this manual, with the pages they are based on.

MM 12 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the multimeter

Send the device to the factory service center annually to maintain specified accuracy.

Show in the manual (page 33)
As needed
Replace batteries

Replace all four batteries immediately when the battery symbol disappears and flashes.

Show in the manual (page 33)
As needed
Replace fuses

Replace the 440 mA and 11 A fuses if they are defective or blown.

Show in the manual (page 33)
Regularly
Clean the housing

Wipe the exterior with a clean dry cloth. Do not use solvents or abrasives.

Show in the manual (page 33)
Before each use
Inspect leads and unit

Check the device and measuring leads for visible damage before every operation.

Show in the manual (page 23)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend MM 12?

Yes No
0
User Pic

Thomas Klein

6 months ago

Can the data logger record current continuously for hours? The manual states 1 minute max on the A input. Is long-term documentation of vehicle standby current possible?

0
User Pic

Manual.ly

6 months ago

Yes, you are right that the continuous measurement time is limited. The values in the manual refer to the maximum uninterrupted measurement time since the current flows directly through the device terminals. You should consider this when using the logger function and selecting ranges.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224

Frequently Asked Questions

A

Yes, it supports frequency measurement up to 100 kHz with appropriate settings and probes.

Is this answer helpful?

A

It transmits data wirelessly to Android or iOS devices via the official BENNING MM-CM Link app.

Is this answer helpful?

A

It handles up to 1000 V AC/DC in CAT III environments safely with appropriate leads.

Is this answer helpful?

A

It uses standard four 1.5 V AA or IEC LR6 mignon batteries which are easily sourced.

Is this answer helpful?

A

A warranty covers the first year but annual recalibration is recommended for accuracy maintenance.

Is this answer helpful?

A

Yes, use the included data cable with the provided BENNING PC-Win MM 12 software for export.

Is this answer helpful?

A

Yes, a built-in buzzer sounds when resistance falls below the adjustable threshold limit.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • True RMS technology provides accurate readings even with non-sinusoidal waveforms.
  • Bluetooth 4.0 enables seamless wireless data transfer to mobile devices for real-time analysis.
  • High safety classification CAT IV 600 V ensures operator protection in hazardous environments.
  • Extensive memory functions support over forty thousand stored logging values.
  • Built-in buzzer and light sensor improve usability in various lighting conditions.
VS

Disadvantages

  • Battery life may require frequent replacement during heavy continuous usage.
  • Learning curve exists for advanced functions like data logger intervals and setup menus.
  • Protective rubber holster adds slight bulk when carrying in tight pockets.
  • Optical interface cable is separate and requires specific driver installation steps.
M: qwen/qwen3.5-flash-20260224

Product Specification

Measurement Range

max. 10A, max. 1000V, max. 40MΩ

Package Contents

Test Leads

M: qwen/qwen3.5-flash-20260224

Product Description

BENNING MM 12 Precision Overview

When working with complex electrical systems, precision is non negotiable. The BENNING MM 12 delivers exceptional performance for professionals who demand reliability in their daily tasks. This device stands out due to its True RMS capabilities which ensure accurate readings even with distorted waveforms common in modern power electronics. You will appreciate the robust design that meets high safety standards like CAT IV and CAT III ratings. This level of certification provides confidence when testing live circuits in industrial settings.

Users can measure direct and alternating voltage with high accuracy levels. Current measurement supports both low and high amp ranges seamlessly. Resistance testing helps identify faulty components in circuits quickly. Capacitance measurement allows for verifying capacitor health without removal. Frequency analysis aids in troubleshooting motor drives and power quality issues. The unit also includes temperature measurement using a K type sensor probe. A clear digital display helps in reading values quickly under diverse lighting conditions. The inclusion of a light sensor ensures visibility in dim environments during night shift work. Furthermore, the unit stores measurement data internally for later review during audit processes.

Modern workflows require efficient data handling to reduce administrative burdens. This multimeter supports Bluetooth connectivity for wireless transmission to smartphones or tablets immediately. Compatible apps allow for real-time analysis without interrupting physical workflow. For fixed stations, a USB interface enables secure data transfer to a PC system efficiently. The software suite facilitates saving data as Excel files for detailed reports and presentations. Referencing the Benning MM 12 Multimeter Manual ensures users utilize full potential features like data logging and graphing functions. The memory function stores up to one thousand measurements for quick retrieval. Data logger support handles up to forty thousand values with adjustable intervals.

Safety is paramount in high voltage environments where human error can be costly. Built-in fuses protect against overload conditions effectively preventing device damage. The protective rubber frame guards against physical damage during transport and field drops. Users should always inspect leads for insulation integrity before operation in all cases. Battery life is optimized for extended field use without frequent replacements required. Regular calibration maintains measurement accuracy over time according to manufacturer guidelines. Cleaning should only involve dry cloths to avoid liquid ingress into sensitive components.

The physical dimensions allow for portability in tight spaces. Weighing under five hundred grams it remains lightweight for single hand operation. The rotating switch simplifies function selection without digging through menus. Range hold features lock readings for stable observation. Maximum voltage protection supports up to one thousand volts DC or AC safely. Temperature range covers sub zero to high heat applications. Resolution digits provide clarity for small readings requiring precision.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly