Manual.ly Logo

Benning CM 9-2 Manual

5.0 · 1 Ratings

PDF manual · 37 Pages

English

M: QW-35-FL
page

/ 37

Loading...
ab0be6a02b41a314b6266b6a62d3bbad2a61 page f
10/ 2019
BENNING CM 9-2
8
Operating manual
BENNING CM 9-2
TRUERMSleakagecurrentclampaccordingtoEN61557-13for
- measuringtheleakagecurrents(di󰀨erentialcurrentandprotectivecon-
ductorcurrent)inelectricalsystemsanddevices
- AC current measurements
Table of contents
1. User instructions
2. Safety instructions
3. Scope of delivery
4. Device description
5. General information
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING CM 9-2
9. Maintenance
10. Environmental note
1. User instructions
Thisoperatingmanualisintendedfor
- skilledelectriciansand
- electrotechnicallytrainedpersonnel.
TheBENNING CM9-2is intendedfor making measurementsin dryenviron-
ment.Itmustnotbeusedinpowercircuitswithanominalvoltagehigherthan
CATIV300VorCATIII600V(MoredetailsinSection6.“Ambientconditions”).
ThefollowingsymbolsareusedinthisoperatingmanualandontheBENNING
CM9-2:
ApplicationaroundandremovalfromHAZARDOUSLIVEconductors
ispermitted.
Warningofelectricaldanger!
Indicatesinstructionswhichmustbefollowedtoavoiddangertoper-
sons.
Attention!Mustcomplywithdocumentation!
Thissymbolindicatesthattheinformationprovidedintheoperating
manualmustbecompliedwithinordertoavoidrisks.
CAT III
MeasuringcategoryIIIisapplicabletotestingandmeasuringcircuits
connectedtothedistributioncircuitofthelow-voltagemainsinstalla-
tionofabuilding.
CAT IV
MeasuringcategoryIVisapplicabletotestingandmeasuringcircuits
connected tothe feed-in point of thelow-voltage mains installation
ofabuilding.
Donotusethedeviceinexternallow-frequencymagneticeldswith
morethan30A/m.
ThissymbolontheBENNINGCM9-2 indicatesthattheBENNING
CM9-2isequippedwithprotectiveinsulation(protectionclassII).
Please observe the operating manual!
Thissymbolappearsonthedisplaytoindicateadischargedbattery.
(AC)Alternatingcurrent
Ground(voltageagainstground)

Chat with your Benning CM 9-2 manual using AI

Get instant AI answers from your Benning CM 9-2 manual

Ask anything about the Benning CM 9-2. Answers come from this manual, with the pages they are based on.

CM 9-2 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the device

Send the unit to Benning Service Center for recalibration to maintain specified accuracy. Recommended interval is one year.

Show in the manual (page 21)
Regularly
Clean the housing

Wipe the casing externally with a clean dry cloth. Do not use solvents or scouring agents. Ensure battery contacts are free of electrolyte leaks.

Show in the manual (page 21)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend CM 9-2?

Yes No
0
User Pic

Isabelle Marshall

5 months ago

Does the app work well with the current clamp, and is it easy to use?

0
User Pic

Manual.ly

5 months ago

The app is designed to complement the clamp for enhanced diagnostics. While some users have not yet tested it, the device itself effectively locates fault currents. We recommend downloading the latest version from our store for optimal performance.

M: QW-35-FL
M: QW-35-FL
0
User Pic

QuoEt19

5 months ago

Is this clamp meter reliable enough for professional electrical troubleshooting?

M: QW-35-FL

Frequently Asked Questions

A

The device is rated for CAT III 600 V and CAT IV 300 V. It must not be used in circuits exceeding these nominal voltages to ensure user safety.

Is this answer helpful?

A

Press the Bluetooth key for two seconds to activate the interface. Download the BENNING MM-CM Link app from the Google Play Store or Apple App Store and pair the device within a 10-meter range.

Is this answer helpful?

A

No, the BENNING CM 9-2 is designed exclusively for AC current measurements and leakage current detection. It does not support direct current measurements.

Is this answer helpful?

A

Benning recommends a recalibration interval of one year to maintain the specified measuring accuracy and ensure compliance with technical specifications.

Is this answer helpful?

A

The instrument is powered by two 1.5 V Mignon batteries, also known as AA or IEC LR6/AA batteries. Battery life is approximately 60 hours without backlight or Bluetooth usage.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • True RMS measurement ensures accuracy even with non-sinusoidal waveforms
  • Bluetooth connectivity allows real-time data transfer to mobile devices
  • Low-pass filter effectively reduces high-frequency interference
  • Compliant with DIN EN 61557-13 safety standards for leakage current
  • Auto-power-off feature conserves battery life during long tasks
VS

Disadvantages

  • Not suitable for wet or humid environments due to IP30 rating
  • Requires specific alkaline AA batteries for optimal performance
  • Maximum opening of 40 mm may limit use on very thick cables
  • Accuracy decreases slightly if conductors are not clamped centrally
  • No backlit display for use in extremely dark conditions without external light
M: QW-35-FL

Product Specification

Measurement range

max. 60A

M: QW-35-FL

Product Description

Benning CM 9-2 Multimeter: Precision Leakage Current Measurement

The BENNING CM 9-2 is a specialized True RMS leakage current clamp designed for skilled electricians and electrotechnically trained personnel. This robust instrument is built to measure differential currents and protective conductor currents in electrical systems, devices, and machines according to DIN EN 61557-13 standards. Whether you are working on single-phase or three-phase systems, this device offers reliable performance in dry environments with overvoltage categories up to CAT III 600 V and CAT IV 300 V.

Equipped with a digital LCD display featuring a 4-digit readout, the meter provides clear visibility of measured values. The unit features an intuitive control layout including a range button for manual or automatic selection, a hold function to freeze readings, and a MAX/MIN mode to track extreme values during testing. A low-pass filter (LPF) can be activated to suppress high-frequency interference from frequency converters, ensuring accurate readings in noisy industrial settings. Additionally, the device includes a Bluetooth Low Energy interface, allowing real-time data transmission to Android or iOS smartphones via the BENNING MM-CM Link app for seamless analysis and reporting.

Safety is paramount in the design of the BENNING CM 9-2. It adheres to strict protection class II standards and includes features like a prong guard to prevent accidental contact with live conductors. The battery compartment is easily accessible for replacement using standard AA batteries, which provide approximately 60 hours of operation. With dimensions of roughly 230 x 100 x 46 mm and a weight of 450 grams, it remains portable yet durable enough for daily professional use. Always ensure the device is free of voltage before maintenance and store it within specified temperature ranges to maintain accuracy.

M: QW-35-FL

© Copyright 2026 Manual.ly