Manual.ly Logo

Benning CM 11 Manual

5.0 · 3 Ratings

PDF manual · 87 Pages

English

M: QW-35-FL
page

/ 87

Loading...
d91a8fd1b48bcc4c5dd2d5b51d8128a367c2 page d
06/ 2016
BENNING CM 9
6
D
terie oder des Batteriegehäuses vorhanden sind, reinigen Sie auch diese mit
einem trockenen Tuch.
9.3 Batteriewechsel
Vor dem Öffnen die BENNING CM 9 unbedingt spannungsfrei
machen! Elektrische Gefahr!
Das BENNING CM 9 wird durch zwei 1,5 V-Microbatterien/ Typ AAA (IEC LR 3)
gespeist.
Ein Batteriewechsel ist erforderlich, wenn in der Anzeige 3 das Batteriesymbol
5 erscheint. Beim Einschalten der BENNING CM 9 erfolgt ein Batterietest.
So wechseln Sie die Batterien:
- Schalten Sie das BENNING CM 9 aus.
- Legen Sie das BENNING CM 9 auf die Frontseite und lösen Sie die Schrau-
be vom Batteriedeckel.
- Heben Sie den Batteriedeckel (im Bereich der Gehäusevertiefungen) vom
Unterteil ab.
- Heben Sie die entladenen Batterien aus dem Batteriefach.
- Legen Sie dann die Batterien in die dafür vorgesehenen Stellen im Batterie-
fach (achten Sie bitte auf die korrekte Polung der Batterien)
- Rasten Sie den Batteriedeckel an das Unterteil an, und ziehen Sie die
Schraube an.
siehe Bild 9: Batteriewechsel
Leisten Sie Ihren Beitrag zum Umweltschutz! Batterien dürfen
nicht in den Hausmüll. Sie können bei einer Sammelstelle für
Altbatterien bzw. Sondermüll abgegeben werden. Informieren
Sie sich bitte bei Ihrer Kommune.
9.4 Kalibrierung
Benning garantiert die Einhaltung der in der Bedienungsanleitung aufgeführten
technischen Spezikationen und Genauigkeitsangaben für das erste Jahr nach
dem Auslieferungsdatum. Um die angegebenen Genauigkeiten der Messergeb-
nisse zu erhalten, muss das Gerät regelmäßig durch unseren Werksservice ka-
libriert werden. Wir empfehlen ein Kalibrierintervall von einem Jahr. Senden Sie
hierzu das Gerät an folgende Adresse:
Benning Elektrotechnik & Elektronik GmbH & Co. KG
Service Center
Robert-Bosch-Str. 20
D - 46397 Bocholt
10. Umweltschutz
Bitte führen Sie das Gerät am Ende seiner Lebensdauer den zur
Verfügung ste hen den Rückgabe- und Sammelsystemen zu.

Chat with your Benning CM 11 manual using AI

Get instant AI answers from your Benning CM 11 manual

Ask anything about the Benning CM 11. Answers come from this manual, with the pages they are based on.

CM 11 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the device

Send the device to Benning service for recalibration every year to maintain specified measurement accuracy.

Show in the manual (page 13)
As needed
Clean the housing exterior

Wipe the outside of the housing with a clean, dry cloth. Do not use solvents or scouring agents.

Show in the manual (page 12)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend CM 11?

Yes No
0
User Pic

quia_error

6 months ago

Is this leakage current clamp easy to use and read, or are the buttons hard to reach with one hand?

0
User Pic

Manual.ly

5 months ago

The device is generally praised for its excellent operability and readability. However, some users note that while it is a great tool, the button placement can be slightly tricky during one-handed operation and may require a short adjustment period.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Graciela Padberg

5 months ago

Does this Benning CM9 model fit well in the hand for comfortable use?

M: QW-35-FL

Frequently Asked Questions

A

The device is designed for circuits with a nominal voltage up to 300 V AC relative to earth. It must not be used in higher voltage circuits.

Is this answer helpful?

A

Turn the device off, then press and hold the HOLD/PEAK key for about 5 seconds until the AutoHold indicator flashes three times and two beeps sound.

Is this answer helpful?

A

It requires two 1.5 V micro batteries, specifically Type AAA (IEC LR 03). They are included in the package upon purchase.

Is this answer helpful?

A

Yes, the Benning CM 9 supports leakage current measurements in three-phase systems both with and without a neutral conductor.

Is this answer helpful?

A

To maintain specified accuracy, Benning recommends recalibrating the device every year through their factory service center.

Is this answer helpful?

A

Yes, it has overload protection, but it does not provide a specific warning signal before an overload condition occurs.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • True RMS measurement ensures accuracy with non-sinusoidal waveforms
  • AutoHold function automatically saves stable readings without manual input
  • Built-in comparator with audible and visual alarms for threshold breaches
  • Compact and lightweight design weighing only 270 grams for easy handling
  • Automatic background lighting activates in low-light conditions for visibility
VS

Disadvantages

  • Battery life is limited to approximately 60 hours of continuous use
  • Not suitable for use in wet environments or high humidity areas
  • Requires manual calibration every year to maintain guaranteed accuracy
  • Overload protection does not provide a warning signal before failure
  • Accuracy decreases slightly if conductors are not clamped centrally in the jaws
M: QW-35-FL

Product Specification

Measurement range

max. 300V

M: QW-35-FL

Product Description

Benning CM 9 Clamp Meter-Multimeter: Precision Leakage Current Measurement

The Benning CM 9 is a specialized digital leakage current clamp designed for skilled electricians and technically trained personnel. It excels at measuring differential currents and protective conductor currents in electrical systems and devices. This robust tool ensures safety by detecting leakage in single-phase and three-phase networks, whether or not a neutral conductor is present.

Designed for dry environments, the device operates safely up to 300 V AC within overvoltage category III. Its large 35/6-digit LCD display provides clear readings, supported by an automatic backlight that activates in low light. The meter features advanced functions like AutoRange for effortless scaling, PeakHold for capturing maximum values, and AutoHold which automatically stores stable readings after ten cycles. A built-in comparator allows users to set thresholds at 0.25 mA, 0.5 mA, or 3.5 mA, triggering visual and audio alerts if limits are exceeded.

Safety is paramount with the Benning CM 9. It complies with strict standards including DIN VDE and EN 61010-1. The instrument includes a barrier hand guard to prevent contact with live conductors during measurement. It runs on two AAA batteries, offering approximately 60 hours of operation, and features an Auto Power Off function to conserve energy after 20 minutes of inactivity. Whether performing maintenance or new installations, this clamp meter provides reliable data essential for maintaining electrical integrity.

Key Features and Benefits

The Benning CM 9 combines portability with high-performance metrics. Weighing only 270 grams and measuring 205 x 75 x 40 mm, it fits easily into any toolkit. The jaw opening accommodates cables up to 40 mm in diameter. Users benefit from True RMS measurement capabilities, ensuring accuracy even with non-sinusoidal waveforms. The low-pass filter effectively reduces interference signals above 100 Hz, providing clean data in noisy industrial settings.

Maintenance and Care

Proper care extends the life of your equipment. Always disconnect power before opening the battery compartment. Clean the housing with a dry cloth; avoid solvents or abrasive materials. If electrolyte leaks occur, clean contacts immediately. For long-term storage, remove the batteries to prevent corrosion. Calibration is recommended annually to maintain specified accuracy levels.

Important Notes

  • Do not use in wet conditions or outside the specified temperature range.
  • Ensure cables are centered in the jaws for optimal accuracy.
  • Replace batteries immediately when the low-battery symbol appears.
M: QW-35-FL

© Copyright 2026 Manual.ly