Manual.ly Logo

Benning CM 1-1 Manual

4.3 · 3 Ratings

PDF manual · 107 Pages

English

M: QW-35-FL
page

/ 107

Loading...
45b65cee4e27548fc37a012f62b4db850667 page 14
02/ 2018
BENNING CM 1-1/ 1-2
14
- Connect the new battery/batteries to the battery supply lines and arrange
them in such a way that they are not crushed between the housing parts
(BENNING CM 1-1). Then, place the batteries into the battery compartment
at the provided place.
- Lock the battery compartment cover into place on the bottom part and tight-
en the screws.
See gure 6a, 6b: Battery replacement
Make your contribution for environmental protection! Do not
dispose of discharged batteries via the household waste.
Instead, return them to a collecting point for discharged
batteries or spezial waste. Please look for information in your
community‘s facilities.
9.4 Calibration
Benning guarantees compliance with the technical and accuracy specications
stated in the operating manual for the rst 12 months after the delivery date.
To maintain accuracy of the measuring results, the device must be recalibrated
in regular intervals by our factory service. We recommend recalibrating the de-
vice once a year. For this purpose, send the device to the following address:
Benning Elektrotechnik & Elektronik GmbH & Co. KG
Service Center
Robert-Bosch-Str. 20
D - 46397 Bocholt
10. Technical data of the measuring accessories ( BENNING CM 1-2)
- Standard: EN 61010-031,
- Maximum rated voltage to earth () and measuring category:
With push-on caps: 1000 V CAT III, 600 V CAT IV,
Without push-on caps: 1000 V CAT II,
- Maximum rated current: 10 A,
- Protection class II (
), continuous double or reinforced insulation,
- Contamination class: 2,
- Length: 1.4 m, AWG 18,
- Ambient conditions:
Barometric height for measurements: max. 2000 m,
Temperature: 0 °C to + 50 °C, humidity 50 % to 80 %
- Use the measuring leads in perfect and clean condition as well as according
to these operating instructions only, as otherwise the protection provided
might be impaired.
- Replace the measuring leads, if the insulation is damaged or if the conduc-
tor/ connector is interrupted.
- Do not touch the bare contact tips of the measuring leads. Only touch the
area intended for your hands!
- Insert the bent terminals into the testing or measuring device.
11. Environmental note
At the end of product life, dispose of the unserviceable device via
appropriate collecting facilities provided in your community.

Chat with your Benning CM 1-1 manual using AI

Get instant AI answers from your Benning CM 1-1 manual

Ask anything about the Benning CM 1-1. Answers come from this manual, with the pages they are based on.

CM 1-1 Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the device

Send the device to Benning service center for recalibration to maintain specified accuracy. Recommended interval is once a year.

Show in the manual (page 20)
As needed
Replace batteries when symbol appears

Replace the 9V battery (CM 1-1) or two 1.5V micro batteries (CM 1-2) immediately if the battery symbol appears on the display.

Show in the manual (page 19)
Before each use
Inspect measuring leads and housing

Check safety measuring leads for insulation damage or breaks, and inspect the housing for visible damages before every measurement.

Show in the manual (page 18)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend CM 1-1?

Yes No
0
User Pic

AutoFixer99

5 months ago

Can this clamp meter measure small DC currents for automotive diagnostics, or is it limited to AC?

0
User Pic

Manual.ly

5 months ago

This device measures AC current starting from 100 mA. It does not support DC measurements. For accurate small DC current readings in automotive applications, we recommend the CM 11 by Benning, which handles both AC and DC.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Emma Clark

4 months ago

Is there a warranty included if the unit arrives defective?

M: QW-35-FL

Frequently Asked Questions

A

The Benning CM 1-1 Clamp Meter can measure alternating current up to a maximum of 400 Amperes. It provides accurate readings across multiple ranges including 20A, 200A, and 400A.

Is this answer helpful?

A

The device is designed for use in dry ambient conditions. It has an IP30 rating which protects against solid objects larger than 2.5mm but offers no water protection. It should not be used in wet or rainy environments.

Is this answer helpful?

A

Benning recommends calibrating the device once a year to maintain the specified accuracy. This ensures that the measurements remain precise and reliable for professional applications.

Is this answer helpful?

A

The Benning CM 1-1 is powered by a single 9V block battery (IEC 6LR61). This battery typically lasts for about 580 hours under normal operating conditions.

Is this answer helpful?

A

No, the Benning CM 1-1 model is specifically designed for AC current measurement only. If you need to measure voltage or resistance, you would need the Benning CM 1-2 model which includes those additional functions.

Is this answer helpful?

A

The Benning CM 1-1 is rated for Category III (CAT III) overvoltage installation categories with a maximum voltage of 600V to earth. It is essential to follow safety guidelines when working near live conductors.

Is this answer helpful?

A

Yes, the meter features a HOLD button that allows users to freeze the displayed measurement value. This is useful for recording data in hard-to-reach locations or dimly lit areas.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Measures AC current up to 400 Amperes accurately
  • Complies with CAT III 600V safety standards
  • Large 3½-digit LCD display for clear visibility
  • Long battery life of approximately 580 hours
  • Includes protective carrying case and test leads
VS

Disadvantages

  • Does not measure DC voltage or resistance (CM 1-1 model only)
  • No auto-power-off function compared to the CM 1-2
  • Requires careful handling of bare conductors
  • Limited to dry environments only
  • Calibration must be performed annually for guaranteed accuracy
M: QW-35-FL

Product Specification

Measurement range

max. 400A, max. 600V

M: QW-35-FL

Product Description

The Benning CM 1-1 Clamp Meter-Multimeter: A Professional Tool for Electrical Diagnostics

The Benning CM 1-1 Clamp Meter-Multimeter stands as a robust solution for electricians and technicians who require precision in dry environments. Designed for measuring alternating current, this device features a digital display that offers clear readings up to 400 Amperes. It is built to withstand the demands of professional use while maintaining high safety standards compliant with CAT III 600V ratings. The meter simplifies complex electrical tasks by allowing users to measure AC current without breaking the circuit, making it an indispensable tool for troubleshooting and maintenance.

Comprehensive Measurement Capabilities

This versatile instrument goes beyond simple current measurement. While the CM 1-2 model adds voltage and resistance testing, the core functionality of the Benning series focuses on accurate AC current monitoring. The device utilizes a jaw clamp mechanism capable of opening up to 30 mm, accommodating various cable sizes. Users can rely on its automatic range selection and hold functions to capture stable readings even in fluctuating conditions. The inclusion of a buzzer for continuity checks adds another layer of utility, providing immediate acoustic feedback when circuits are complete.

Safety and Reliability

Safety is paramount when working with electrical systems. The Benning CM 1-1 adheres to strict international safety standards, ensuring protection against electric shock during operation. Its dual insulation class II design offers enhanced security for the operator. The device includes a low battery indicator to prevent inaccurate measurements due to power loss. With a long battery life of approximately 580 hours using alkaline batteries, professionals can work for extended periods without interruption. Regular calibration ensures that the accuracy remains within specified limits, guaranteeing reliable data for critical decisions.

Key Features

  • High Precision: Accurate measurements for currents up to 400A with minimal error margins.
  • User-Friendly Design: Large LCD display with clear digit height for easy reading in dim lighting.
  • Durable Construction: Built to handle rugged job site conditions with a protective carrying case included.
  • Auto Power Off: Prevents battery drain when the device is left idle for extended periods.
  • Wide Application: Ideal for industrial, commercial, and residential electrical installations.

Proper maintenance involves keeping the device clean and dry, avoiding exposure to direct sunlight, and regularly checking the insulation of test leads. By following these guidelines, the Benning CM 1-1 remains a dependable partner for all your electrical measurement needs.

M: QW-35-FL

© Copyright 2026 Manual.ly