Manual.ly Logo

Benning CC 1 Manual

0.0 · 0 Ratings

PDF manual · 30 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 30

Loading...
86d6349952f2882bc397cd7f6a4675943287 page 7
09/ 2003
BENNING CC 1
5
Operating instructions
BENNING CC 1
clamp-on adapter for alternating current measurement
1. User notes
2. Safety note
3. Scope of delivery
4. Description of appliance tester
5. General information
6. Environment conditions:
7. Electrical specications
8. Making measurements with the BENNING CC 1
9. Maintenance
1. User notes
These operating instructions are intended for
- skilled electricians and
- trained electrical personnel.
The BENNING CC 1 is intended for making measurements in dry environment.
It must not be used for making measurements in electric circuits with a
nominal voltage greater than 600 V DC/AC (for further details, see Section 6.
“Environmental conditions”).
The following symbols are used in these operating instructions and on the
BENNING CC 1:
Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!
The symbol indicates that the information provided in the operating
instructions must be complied with in order to avoid risks.
This symbol on the BENNING CC 1 means that the BENNING CC 1 is
totally insulated (protection class II).
(AC) Alternating current.
Ground (Voltage against ground).
cc_1_in.indd 24.09.2003, 10:135

Chat with your Benning CC 1 manual using AI

Get instant AI answers from your Benning CC 1 manual

Ask anything about the Benning CC 1. Answers come from this manual, with the pages they are based on.

CC 1 Maintenance Schedule

Before each use
Inspect for damage

Check the device and measuring cables for visible damage or malfunction before operation.

As needed
Clean the casing

Wipe the exterior with a clean dry cloth. Do not use solvents or scouring agents.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend CC 1?

Yes No

Frequently Asked Questions

A

It is designed specifically for measuring alternating current up to 400 amps. It cannot measure direct current.

Is this answer helpful?

A

No, the BENNING CC 1 does not contain a battery or a fuse. It is a passive induction sensor.

Is this answer helpful?

A

The unit operates within overvoltage category II and handles up to 600 volts against earth potential.

Is this answer helpful?

A

Clean the casing externally with a clean dry cloth. Do not use solvents or scouring agents.

Is this answer helpful?

A

No, it is intended for measurements in dry environments only to maintain safety compliance.

Is this answer helpful?

A

The conversion factor is 1 milliVolt AC equals 1 Ampere AC based on the output.

Is this answer helpful?

A

It has a protection class II rating with double insulation and an IP 30 protection class.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Measures up to 400 amps of alternating current with high precision.
  • Double insulated with protection class II for enhanced user safety.
  • No battery required reducing maintenance needs and failure points.
  • Compatible with both analog and digital multimeters easily.
  • Compact and lightweight design fits portable toolkits perfectly.
VS

Disadvantages

  • Only measures alternating current and cannot measure DC.
  • Max voltage limit of 600 volts restricts high voltage use.
  • Requires a separate multimeter to function as a measurement tool.
  • Fixed cable length limits flexibility in tight spaces.
  • Dry environment only prevents use in wet conditions outdoors.
M: qwen/qwen3.5-flash-20260224

Product Specification

Measurement Range

Max. 400A, Max. 300V

M: qwen/qwen3.5-flash-20260224

Product Description

Unlock Precision with the Benning CC 1 Current Clamp Adapter

The Benning CC 1 Current Clamp Multimeter Manual describes a critical tool for electrical professionals seeking accurate AC current measurements. This robust adapter transforms standard analog and digital multimeters into powerful analytical instruments for current monitoring. Designed specifically for skilled electricians and trained personnel, it enables seamless monitoring of electrical loads without direct circuit interruption. The unit supports measurements up to 400 amps, making it versatile for various industrial applications. It measures via a dedicated induction coil sensor optimized for alternating current signals to ensure safety.

The sensor utilizes an induction coil to capture alternating current efficiently. This technology ensures non-contact measurement that protects both the operator and the circuit under test. It operates within overvoltage category II environments, reliably handling voltages up to 600 volts against earth. It is strictly intended for use in dry environments to prevent electrical hazards associated with moisture. The protection class II rating guarantees double insulation, offering an extra layer of security during field operations. Users must avoid exposed conductors exceeding the specified voltage limits to maintain safety compliance. The device features a safety clamp bulge to protect against accidental conductor contact effectively.

Installation is straightforward and designed for efficiency. Connect the spiral safety cable to the multimeter inputs using the provided 4 mm safety connectors. The red probe goes to the voltage input while the black probe connects to the COM jack. Once linked, adjust the multimeter to AC voltage mode with a range of 1 to 400 millivolts. The device converts voltage readings directly to current with a 1 mV to 1 A ratio. This simplifies calculations and reduces human error in the field significantly. The clamp opens via a lever mechanism to fit conductors up to 30 millimeters wide easily.

Durability is built into the physical design. The housing measures 148 by 72 by 36 millimeters and weighs only 250 grams. A compact protective pouch protects the unit during transport between job sites. Cleaning requires only a dry soft cloth to avoid damage. No battery or fuse exists inside the unit, which eliminates common failure points found in other electronic adapters. Regular inspections for cable insulation damage are recommended before each use to ensure safe operation. If damage is visible, discontinue use immediately for safety.

Operational limits include a maximum barometric height of 2000 meters above sea level. Temperature must stay between 0 and 40 degrees Celsius with specific humidity controls regarding relative air moisture. For temperatures up to 30 degrees Celsius, humidity must remain under 80 percent. Higher temperatures require lower humidity levels to ensure safety. Storing units at temperatures between negative 20 and positive 60 degrees Celsius is safe for long periods. Always disconnect power before opening the casing for any reason. Follow these guidelines to ensure longevity and accuracy over many years of service. This adapter is an indispensable tool for electrical diagnostics. Its precision and safety features make it a standout choice for professional applications. By adhering to the recommended usage protocols, technicians can achieve reliable results consistently.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly