Manual.ly Logo

Beha-Amprobe AC50A-D Manual

5.0 · 1 Ratings

PDF manual · 78 Pages

English

M: OA-GPT-54-NAN
page

/ 78

Loading...
32f0b77aafedd68cfd97d4f298d0dd7b83dd page 4
2
References marked on instrument or in users manual
The users manual contains information and references, necessary for
safe operation and maintenance of the instrument. Prior to using the
instrument the user is kindly requested to thoroughly read the users
manual and comply with it in all sections.
Failure to read the users manual or to comply with the warnings and
references contained herein can result in serious bodily injury or ins-
trument damage
Introduction
The Amprobe AC50A is a universal, multi-purpose electrical measuring
instrument. It comply with the standards DIN VDE 0411 and EN 61010,
and provide safe, reliable operation. The Currenet Clamp is a valuable
tool for all sorts of measurements in both trade and industry.
• 3
3
/4 digit liquid-crystal display
• manual range selection for current, voltage, resistance measurements
• Clamp opening 30 mm (1/2 inch)
• Switches off automatically
• Integral memory for readings
• Evaluates MIN/MAX values
• Zero-setting
• relative value function
The Amprobe Current Clamp AC50A is supplied complete with leads. After
unpacking, check that the instrument is complete, and that all accessories
are present.
Warning of a potential
danger, comply with users
manual.
Equipment protected
throughout by double
insulation or reinforced
insulation.
Caution! Dangerous vol-
tage. Danger of electrical
shock.
Caution: Risk of Electric
Shock
Conformity symbol,
the instrument com-
plies with the valid
directives. It complies
with the EMC Directive
(89/336/EEC) and the
Low Voltage Directive
(73/23/EEC) with their
valid standards.
Reference. Please use ut-
most attention.
Symbol for the mar-
king of electrical and
electronic equipment
(WEEE Directive
2002/96/EC).

Chat with your Beha-Amprobe AC50A-D manual using AI

Get instant AI answers from your Beha-Amprobe AC50A-D manual

Ask anything about the Beha-Amprobe AC50A-D. Answers come from this manual, with the pages they are based on.

AC50A-D Maintenance Schedule

Remind me when maintenance is due
Yearly
Calibrate the instrument

Recommended calibration interval is one year to maintain accuracy. Shorter intervals are recommended for frequent or rough use; up to three years for infrequent use.

Show in the manual (page 10)
As needed
Clean the instrument

If dirty after daily usage, clean with a humid cloth and mild household detergent. Do not use acid detergents or solvents.

When low battery symbol appears
Replace the batteries

Change batteries when the low-battery symbol appears on the display. Use only 1.5V IEC LR6 alkaline batteries.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend AC50A-D?

Yes No
0
User Pic

Laura Schmidt

9 months ago

How are the shipping speed and product quality? Is the delivery reliable?

0
User Pic

Manual.ly

9 months ago

Based on customer feedback, both product quality and shipping experience are consistently rated positively. Buyers report being very satisfied with the shipment and delivery, and say the product matched expectations. If you order from the same store, you can generally expect a smooth process and dependable shipping. For the most accurate timeline, please check the estimated delivery window shown during checkout and the tracking information provided once your order ships.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is used to measure AC current, voltage, resistance, and continuity. Its clamp design is especially useful for checking current on live conductors without opening the circuit.

Is this answer helpful?

A

Yes. The manual highlights high sensitivity in the lower current ranges, making it suitable for leakage-current checks in some applications.

Is this answer helpful?

A

No. The meter uses manual range selection, so you choose the measurement range before taking a reading.

Is this answer helpful?

A

It is rated CAT II 600 V and follows relevant IEC/EN safety standards. Users should still follow all precautions and use it only within specified limits.

Is this answer helpful?

A

It includes data hold, MIN/MAX capture, zero setting, relative value measurement, an analog bargraph, and auto power-off.

Is this answer helpful?

A

Set the meter to resistance/continuity mode, connect the leads to COM and VΩ, and test the circuit. An audible signal sounds when resistance is below about 40 ohms.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Measures AC current, voltage, resistance, and continuity in one compact tool.
  • Clamp design allows safer current readings without disconnecting the circuit.
  • Helpful functions include HOLD, MIN/MAX, zero, relative value, and auto power-off.
  • Clear LCD plus bargraph improves readability during live measurements.
VS

Disadvantages

  • Manual range selection may be slower than auto-ranging meters for some users.
  • Limited to CAT II 600 V, so it is not meant for every high-energy application.
  • Clamp opening is about 30 mm, which may be restrictive for larger conductors.
  • Advanced users may find the feature set basic compared with modern multifunction meters.
M: OA-GPT-54-NAN

Product Specification

Measurement range

max. 60A, max. 600V

Display

yes

Special features

Automatic shutdown after 30min

Power supply

Battery operated (AA battery)

Dimensions

2.50x7.20x1.40in (WxHxD)

Weight

0.42lb

Scope of delivery

Test leads

M: OA-GPT-54-NAN

Product Description

Beha-Amprobe AC50A-D Clamp Multimeter

The Beha-Amprobe AC50A-D Clamp Multimeter is a practical choice for technicians who need a compact tool for everyday electrical checks. Built for current, voltage, resistance, and continuity measurements, it is especially useful when you want to inspect live conductors without breaking the circuit. The clamp design makes it convenient for field work, maintenance tasks, and troubleshooting in both industrial and trade environments.

A standout advantage of this meter is its sensitivity in lower current ranges, which helps with leakage-current checks and more precise diagnostics. The manual range selection keeps operation straightforward, while the data hold, MIN/MAX, zero setting, and relative value functions add flexibility during fast-moving inspections. The 3 3/4-digit LCD with bargraph support also makes readings easier to follow in changing conditions.

For users searching for the Beha-Amprobe AC50A-D Clamp Multimeter Manual, the most valuable takeaway is that the instrument is designed around safe, structured measurement habits. It supports clamp-based AC current readings up to 60 A, plus voltage and resistance testing through the input sockets. Continuity testing with audible feedback is another helpful feature for checking wiring and connections quickly.

The unit is also built with practical safety in mind. It follows relevant IEC/EN standards, includes overload protection, and uses a 30 mm clamp opening for common conductor sizes. Auto power-off helps preserve battery life, while the low-battery indicator and simple battery replacement process make upkeep easier over time.

Overall, this clamp multimeter fits users who want a dependable, easy-to-handle instrument for routine electrical measurement work. It is not overloaded with complex functions, but it covers the essentials well and adds enough convenience features to remain efficient in daily use.

Notes

  • Best suited for AC current, voltage, resistance, and continuity checks.
  • Useful for leakage-current detection in sensitive setups.
  • Keep it dry, clean, and within the stated measurement ranges.
  • Calibration is recommended regularly for consistent accuracy.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly