be quiet! Silent Loop 2 Manual
PDF manual · 32 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your be quiet! Silent Loop 2 manual using AI
Get instant AI answers from your be quiet! Silent Loop 2 manual
Ask anything about the be quiet! Silent Loop 2. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Silent Loop 2?
Yes NoFrequently Asked Questions
Silent Loop 2 is offered in 120 mm, 240 mm, 280 mm and 360 mm radiator sizes to suit different case layouts and cooling requirements.
Is this answer helpful?
Yes. Connect the ARGB connector to a 5V ARGB header on a compatible motherboard and control illumination through the motherboard software. Only connect to 5V ARGB headers to avoid damage.
Is this answer helpful?
Refill the system after roughly two years of use. Remove the radiator from the case, open the refill port, attach the supplied coolant bottle inverted over the port and gently squeeze until no air bubbles appear. Use only the included coolant bottle to avoid damage.
Is this answer helpful?
Operate the pump between 9 and 12 volts. Voltages below 9 V can cause performance loss and possible faults; do not use voltage regulators below 9 V.
Is this answer helpful?
Check that the CPU block is mounted correctly with the supplied hardware, ensure correct pump voltage (9–12 V), apply an appropriate thin layer of thermal paste, verify coolant level and top up if needed, and confirm fans and radiator have adequate airflow and are not obstructed.
Is this answer helpful?
No. The radiator is aluminum with a black surface tint for appearance; this cosmetic finish does not impair cooling efficiency.
Is this answer helpful?
Warranty is voided by unauthorized modifications, opening the device beyond the refill port, mechanical damage, or use of non‑authorized coolant. Warranty claims require the original purchase receipt from an authorized dealer.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Quiet operation with pump optimized for 9–12 V and low‑noise fans.
- Multiple radiator sizes (120/240/280/360 mm) for diverse builds and performance needs.
- Wide socket compatibility including Intel LGA 1700 and AMD AM5/AM4 with comprehensive mounting kit.
- ARGB lighting with motherboard sync (5V) or standalone controller and SATA power.
- Serviceable refill port and included coolant bottle for long‑term maintenance.
Disadvantages
- Refill required after extended use (~2 years), adding maintenance steps.
- Pump must be run at 9–12 V; undervolting can cause faults or reduced performance.
- Opening the loop beyond the refill port voids warranty and risks damage.
- Radiator finish may show non‑opaque black tinting; cosmetic only but may concern some users.
- Warranty claims require original proof of purchase from an authorized dealer.
Product Specification
Type
internal (open system)
Heatsink
CPU, Copper (nickel-plated)
Compatibility
1150, 1151, 1155, 1156, 1200, 1700 (see note), 2011-0, 2011-1, 2011-3, 2066, AM4, AM5
Reservoir
N/A
Pump
12V
Fittings
G1/4"
Lighting
LED (RGB)
Manufacturer's Warranty
3 Years
Note
Warning! Mounting kit for socket 1700 may not yet be included. 1700 conversion kit available free of charge.
Product Description
be quiet! Silent Loop 2 — Quiet, High‑Performance AIO Cooling
The be quiet! Silent Loop 2 is a closed‑loop all‑in‑one liquid CPU cooler designed to combine effective thermal performance with minimal noise. Available in 120 mm, 240 mm, 280 mm and 360 mm radiator sizes, Silent Loop 2 targets builders who want strong cooling for modern CPUs while keeping acoustic levels low. The kit ships complete with pre‑attached fans, a pump‑top with ARGB lighting, mounting hardware for a wide range of Intel and AMD sockets (including LGA 1700 and AM5/AM4), thermal paste, coolant bottle for refills, and an optional ARGB controller.
Key features and product highlights
Silent Loop 2 prioritizes silent operation through carefully tuned fans and a pump rated for optimum operation at 9–12 V. The radiator uses an aluminum core with a black finish and comes prefilled, while the included refill bottle lets you top up coolant after long‑term use (recommended after about two years). Installation supports multiple socket types with supplied backplates, spacer nuts, and mounting bridges; instructions recommend push or push‑pull fan configurations for best airflow. ARGB lighting can be synced to a 5 V header on compatible motherboards or controlled via the included ARGB controller and SATA power.
The cooler also emphasizes practical serviceability: a refill port on the radiator allows replenishing coolant without opening the sealed loop elsewhere (use only the included coolant). Be quiet! includes a 3‑year manufacturer warranty (original purchaser, authorized reseller) and detailed troubleshooting guidance covering coolant level, pump voltage, fan airflow, and mounting correctness.
Installation notes and safety
Before mounting, remove protective film from the CPU block and apply a thin, even layer of the supplied thermal paste. Ensure the pump is powered within 9–12 V to avoid performance loss or faults. When connecting ARGB, only use a 5 V ARGB header. For refilling, detach the radiator, orient the fill port highest, and squeeze the bottle until no air bubbles remain. Avoid ingesting thermal paste and keep small parts away from children.
Short maintenance tips
- Top up coolant after ~2 years using only the supplied bottle.
- Ensure fans and radiator have adequate clearance for airflow.
- Verify pump voltage and secure mounting to prevent vibration and noise.
Notes
- Radiator paint is cosmetic and does not affect cooling.
- Opening the cooling loop beyond the refill port voids the warranty.
- Warranty processing requires proof of purchase from an authorized dealer.
Search for 67,706 Manuals online
Type-in Brand or Model