Manual.ly Logo

be quiet! Shadow Base 800 Manual

0.0 · 0 Ratings

PDF manual · 38 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 38

Loading...
903122ebe69eba5a94dae8382ca04e921073 page 23
33
Limited Warranty
As per the terms and conditions of this limited warranty as given below, be quiet! warrants its new products to
be free of defects resulting from faulty materials and faulty manufacturing for the length of the warranty period.
I. APPLICABILITY
This non-transferable warranty is applicable to newly purchased, previously unopened be quiet! prod-
ucts and is enforceable by only the original consumer purchaser. Proof of purchase is required for
warranty service, so should be retained. be quiet! does not provide warranty registration services.
II. WARRANTY PERIOD
For eligible products, parts and labor are warranted for the applicable warranty period from the date of
purchase. The applicable warranty period varies by product model, and is identified in your user docu-
mentation, on the product package, or as listed below. Should any of these warranty periods differ, the
longest specified warranty period will apply. Replaced products will be warranted for the remainder of
the original warranty period or thirty days, whichever is longer.
III. EXCLUSIONS
The following are not covered by the warranty:
1. Normal wear and tear.
2. Any product which has been modified without permission from be quiet!, or on which the serial num-
ber or warranty sticker has been defaced, modified, or removed.
3. Damage, deterioration or malfunction resulting from:
Accident, abuse, misuse or improper use, neglect, connection to an improper voltage source, unau-
thorized product modification, or failure to follow instructions included with the product.
Fire, water, lightning, or other acts of nature.
Repair or attempted repair by anyone not authorized by be quiet!.
Shipping or transport damage (claims must be made with the carrier).
Any other cause which does not relate to a defect in materials or manufacturing workmanship.
4. Cartons, cases, batteries, cabinets, tapes, accessories or other consumables used with this product.
5. be quiet!, Inc. does not warrant that this product will meet your requirements. It is your responsibility
to determine the suitability of this product for your purpose.
6. Removal or installation charges.
7. Shipping charges.
8. Any incidental charges.
IV. EXCLUSION OF DAMAGES
be quiet!‘s sole obligation and liability under this warranty is limited to the repair or replacement of a
defective product at its option. be quiet! shall not, in any event, be liable for any special, incidental,
indirect, or consequential damages whatsoever, including but not limited to loss of profits, revenue, or
data (whether direct or indirect), damages resulting from interruption of service and loss of business,
or for liability in tort relating to this product or resulting from its use or possession, even if be quiet! has
been advised previously of the possibility of such damages.
V. LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not limited to those of merchant-
ability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty
length specified in Paragraph II.
VI. LOCAL LAW AND YOUR WARRANTY
This warranty gives you specific legal rights. You may also have other rights granted under local law.
These rights may vary.
VII. NO OTHER WARRANTY
No be quiet! employee, dealer, or other agent is authorized to make any modification, extension, or
addition to this warranty.
VIII. TO OBTAIN TECHNICAL SUPPORT OR WARRANTY SERVICE
Please see your product owner’s manual or visit the service section at www.bequiet.com for details and
contact information. You will need to provide proof of purchase for warranty service.

Chat with your be quiet! Shadow Base 800 manual using AI

Get instant AI answers from your be quiet! Shadow Base 800 manual

Ask anything about the be quiet! Shadow Base 800. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Shadow Base 800?

Yes No

Frequently Asked Questions

A

It is three years for consumers from authorized dealers.

Is this answer helpful?

A

Yes, the case supports E-ATX, ATX, M-ATX and Mini-ITX boards.

Is this answer helpful?

A

There are three 140mm Pure Wings fans included.

Is this answer helpful?

A

Yes, you can mount the graphics card vertically.

Is this answer helpful?

A

The case supports graphics cards up to 430mm in length.

Is this answer helpful?

A

Yes, the ATX power supply is not included.

Is this answer helpful?

A

Simply remove them and wash regularly to maintain performance.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Excellent cooling with 3 preinstalled fans
  • Flexible motherboard support from Mini-ITX to E-ATX
  • Vertical GPU mounting option for large cards
  • Strong cable management bar and channels
  • Generous drive bay capacity for storage
VS

Disadvantages

  • Power supply unit not included in package
  • Heavy weight may complicate initial mounting
  • Three pin ARGB connector limits features
  • Warranty voided by unauthorized modifications
  • Dust filters require frequent cleaning
M: qwen/qwen3.5-flash-20260224

Product Specification

External

N/A

Internal

2x 3.5" (Horizontal, Drive Cage), 4x 2.5", 4x 2.5" (Optional), 2x 3.5" (Optional)

Ports

1x USB-C 3.1 (10Gb/s, 20-Pin Key-A Header), 2x USB-A 3.0 (5Gb/s), 1x 3.5mm Jack (Line-Out), 1x 3.5mm Jack (Line-In)

PCI Slots

7

Fan (Left)

N/A

Fan (Right)

N/A

Fan (Bottom)

1x 140mm (Optional)

Fan (Other)

N/A

Radiator Sizes

120/140/240/280/360/420mm Front, 120/140/240/280/360/420mm Top, 120mm Back

Motherboard Support

Up to ATX (E-ATX possible with unknown dimensions)

Supported Motherboards

Mini-ITX (6.7"x6.7")/uATX (9.6"x9.6")/ATX (12"x9.6")/E-ATX (Unknown dimensions)

Power Supply

ATX (max. 9.84" deep)

PSU Position

Bottom

CPU Cooler

Max height 7.09 inches

Graphics Cards

Max 16.93 inches

Dimensions (WxHxD)

9.72x20.55x21.65 inches

Volume

2.50 cubic feet

Chassis Type

Mid-Tower

Front

Mesh, Dust Filter Inside

Top

Partially Closed, Mostly Fan Grille, Dust Filter Outside

Bottom

Partially Closed, Mostly Fan Grille, Dust Filter Outside

Left Side

Closed, Glass

Right Side

Closed, Sound Damping Foam Inside

Back

Partially Closed, Fan Grille Top Right, PCI Slots (Modular, 7x Horizontal or Variant 2: 7x Vertical)

Front IO Position

Chassis Side: Top, Height: Front, Position: Center

Motherboard Orientation

Motherboard Orientation: Facing Left

Features

Cable Management, Dust Filters, PCI Slots Vertically Mountable, Glass View Window, Sound Dampened

Note on E-ATX

Motherboard and Chassis manufacturers use different dimensions for E-ATX. This manufacturer makes no specified E-ATX supported dimensions. Motherboards with E-ATX/SSI EEB dimensions of 305x330mm or 12"x13" may not be supported.

USB Nomenclature

Left

M: qwen/qwen3.5-flash-20260224

Product Description

Exploring the be quiet! Shadow Base 800

The be quiet! Shadow Base 800 is a superior Miditower chassis engineered for enthusiasts demanding performance and silence. Technical details extracted from the be quiet! Shadow Base 800 Manual confirm extensive compatibility with EATX motherboards. This robust enclosure offers flexible airflow configurations supported by dust filters located at the front and bottom sections for cleaner internal conditions. Users receive preinstalled Pure Wings 3 fans which guarantee quiet operation under various load scenarios. Design priorities include effective cable management utilizing dedicated bars and routing channels to ensure a tidy interior aesthetic. Additionally, the chassis allows for significant cooling radiator sizes up to 420mm on top and front panels.

Storage capabilities are extensive accommodating both 2.5 inch and 3.5 inch drives across multiple bays within the structure. The chassis handles large graphics cards reaching up to 430mm including vertical mounting options for enhanced visibility. Power supply specifications allow for standard ATX units though the component is not included in the shipping package. Internal dimensions measure 550 by 247 by 522 mm providing sufficient room for complex builds. Materials combine steel and ABS to ensure stability and durability during extended usage periods. Weight totals around 11.8 kg net which reflects solid construction quality without being overly cumbersome.

Front connectivity offers USB 3.2 Gen.2 Type C ports for rapid data transmission capabilities. ARGB support allows synchronization across the system via three pin connectors for visual customization. Assembly instructions prioritize accessibility with removable panels facilitating easy maintenance and hardware upgrades. The manufacturer provides a three year warranty for consumers buying from authorized dealers globally. Proof of purchase records remain essential for validating service claims within the defined warranty period. Airflow covers aid in directing cool air efficiently towards critical components while protecting sensitive electronics.

Key Takeaways

System notes recommend securing all components securely prior to transport to prevent movement. Verify motherboard dimensions carefully before starting any installation process to avoid fitment issues. Dust filters should undergo regular cleaning sessions to sustain optimal airflow and cooling efficiency. Warranty coverage explicitly excludes modifications or accidental damage resulting from physical misuse or accidents. Contact Listan GmbH service centers directly for inquiries regarding specific support needs or technical assistance. Ensure cables are routed properly behind panels to maximize cooling performance and aesthetic cleanliness.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly