be quiet! Dark Base Pro 901 Manual
PDF manual · 52 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your be quiet! Dark Base Pro 901 manual using AI
Get instant AI answers from your be quiet! Dark Base Pro 901 manual
Ask anything about the be quiet! Dark Base Pro 901. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Dark Base Pro 901?
Yes NoFrequently Asked Questions
The case supports XL-ATX, E-ATX, ATX, M-ATX and Mini-ATX motherboards. Be mindful of clearance with HDD cages—ATX and E-ATX maximum widths vary depending on cage placement.
Is this answer helpful?
Front: 120/140/240/280/360/420 mm; Top: 120/240/360 mm; Side: 120/240/360 mm; Rear: 120/140 mm. Fan capacity includes up to 3x140 or 3x120 front, 3x top, 3x side and 1x rear depending on layout.
Is this answer helpful?
The Dark Base Pro 901 ships with three Silent Wings 4 PWM 140 mm fans (two front, one rear) rated up to 1900 rpm, providing a quiet baseline cooling solution and PWM control via the included fan controller.
Is this answer helpful?
You can install up to sixteen 2.5-inch drives (six included), up to seven 3.5-inch drives (two included) and one 5.25-inch drive (one included). The case includes SSD brackets, HDD cages, and an ODD bracket plus necessary screws and ties.
Is this answer helpful?
Yes. The case includes a VGA holder and supports vertical GPU installation. An inverted layout option is supported for alternative motherboard orientation and showcase builds.
Is this answer helpful?
Front I/O includes 1x USB-C 3.2 Gen 2, 4x USB 3.2, HD audio, a fan controller and an ARGB controller. The ARGB controller offers multiple color modes and synchronization options.
Is this answer helpful?
A 3-year manufacturer warranty applies for consumers purchasing from authorized be quiet! dealers. Proof of purchase is required. Warranty terms, exclusions, and regional support contacts are available on bequiet.com.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Extensive cooling support: up to 420 mm radiator in front and multiple fan mounting locations for high-performance liquid or air setups.
- Quiet stock cooling: comes with three Silent Wings 4 PWM 140 mm fans tuned for low noise and strong airflow.
- Large component compatibility: supports XL-ATX/E-ATX motherboards, CPU coolers to 190 mm, and GPUs up to 495 mm.
- High storage capacity: up to sixteen 2.5-inch and seven 3.5-inch drive configurations with included mounts.
- Premium features and connectivity: USB-C 3.2 Gen 2 front port, ARGB controller, fan controller, and modular interior.
Disadvantages
- Large footprint: full tower size (603 x 254 x 569 mm) requires significant desk or case space.
- Weighty: net weight around 16.3 kg may be cumbersome for frequent moves or transport.
- Complexity for beginners: many modular parts and configuration options can overwhelm first-time builders.
- Price premium: premium materials and included features typically place it in a higher price bracket.
- Potential compatibility checks: inverted layout, vertical GPU mount, and radiator clearances require planning.
Product Specification
External
1x 5.25"
Internal
2x 3.5" (transverse, HDD cage), 2x 2.5", 10x 2.5" (optional), 5x 3.5" (optional) or Variant2: 6x 2.5", 10x 2.5" (optional), 5x 3.5" (optional)
Connections
1x USB-C 3.1 (10Gb/s, 20-Pin Key-A Header), 4x USB-A 3.0 (5Gb/s), 1x 3.5mm jack (Line-Out), 1x 3.5mm jack (Line-In)
PCI slots
8
Fan (front)
2x 5.51in, 1900rpm, 0.09 inH2O, 78.39 CFM, 29.3dB(A) or 3x 5.51in (optional)
Fan (rear)
1x 5.51in, 1900rpm, 0.09 inH2O, 78.39 CFM, 29.3dB(A)
Fan (left)
N/A
Fan (right)
3x 4.72in (optional)
Fan (top)
3x 5.51in (optional)
Fan (bottom)
1x 5.51in (optional)
Fan (other)
N/A
Radiator sizes
4.72/5.51/9.45/11.02/14.17/16.54in front, 4.72/9.45/14.17in top, 4.72/5.51in rear, 4.72/9.45/14.17in right
Motherboard
up to XL-ATX (unknown dimensions)
Supported Motherboards
Mini-ITX (6.7"x6.7")/Micro-ATX (9.6"x9.6")/ATX (12"x9.6")/E-ATX (SSI CEB, 12"x10.5")/E-ATX (SSI EEB, 12"x13")/XL-ATX (unknown dimensions)
Power supply
ATX (max. 11.34in deep)
Power supply position
bottom
CPU cooler
max. 7.48in height
Graphics cards
max. 19.49in (without HDD cage, 13.78-14.57in with HDD cage)
Lighting
RGB-Header 3-Pin ARGB (+5V/DATA/GND), integrated LED control, integrated RGB LED lighting
Dimensions (WxHxD)
10.00x22.40x23.74in
Volume
3.08 cu ft
Weight
35.96 lbs
Case type
Full-Tower
Front
modular (exchangeable front panel, partially closed, mostly Mesh, dust filter inside or Variant2: closed, side ventilation slots, dust filter inside, insulation mat inside)
Top
modular (exchangeable top panel, closed, insulation mat inside, removable cover or Variant2: partially closed, partially fan grill, dust filter inside, removable cover)
Bottom
partially closed, mostly fan grill, dust filter outside
Left
closed, Glass
Right
partially closed, front fan grill, dust filter, insulation mat inside
Rear
partially closed, fan grill top right, PCI slots (modular, 8x horizontal or Variant2: 8x vertical)
Front I/O Position
Case side: top, Height: Front, Position: center
Motherboard orientation
Motherboard orientation modular: to the right or to the left; Connections: connections at the rear
Special features
integrated fan control, integrated Qi charging station, cable management, dust filter, motherboard tray, graphics card holder, PCI slots vertically mountable, glass viewing window, sound insulated
Note on E-ATX
Motherboard and case manufacturers refer to different dimensions as E-ATX. Motherboards with E-ATX/SSI EEB dimensions of 12.01x12.99in or 12"x13" may not be supported.
USB notation
Link
Product Description
be quiet! Dark Base Pro 901 — Premium Full Tower with Flexible Cooling and Quiet Operation
The be quiet! Dark Base Pro 901 is a high-end full tower PC case engineered for silence, flexibility, and effortless system building. Designed to support large motherboards including XL-ATX and E-ATX, this chassis offers extensive cooling options, generous drive capacity, and refined cable management. Its solid steel construction, aluminum accents, and modular interior make it a compelling choice for enthusiasts who want a premium look without sacrificing thermals or acoustics.
Inside, the Dark Base Pro 901 ships with three Silent Wings 4 PWM 140 mm fans, delivering quiet high-performance airflow while minimizing noise. The case supports multiple radiator configurations (including up to 420 mm in the front and 360 mm on top or side), accommodates tall CPU coolers up to 190 mm and GPUs up to 495 mm, and allows flexible fan placements across front, top, side, bottom and rear. Preinstalled ARGB and fan controllers simplify lighting and fan management, while a Type-C USB 3.2 Gen 2 port and multiple USB 3.2 ports on the I/O panel give modern connectivity.
Storage capacity is generous: up to sixteen 2.5-inch drives (six included), seven 3.5-inch bays (two included), and one 5.25-inch bay. The included HDD cages, SSD brackets, and tool screws make drive installation straightforward. The case also provides a vertical GPU mounting option with a dedicated VGA holder for better presentation of high-end graphics cards. Thoughtful details such as removable dust filters (front and bottom), tool-free side panels, and an optional inverted layout expand customization and maintenance convenience.
Cable routing and PSU shrouding are handled with dedicated covers and Velcro ties, and the case supports long PSUs up to 288 mm. Builders will appreciate the modular fan/radiator brackets, plethora of mounting points, and included accessories for tidy installations. The package also emphasizes durability and user assurance: a 3-year manufacturer warranty (when purchased from authorized retailers) and clear warranty terms and service contacts.
For system builders seeking a quiet, highly configurable full tower that blends premium materials, expansive cooling support, and practical installation features, the be quiet! Dark Base Pro 901 is a polished platform for high-performance rigs and showcase builds.
Notes
- Includes three Silent Wings 4 PWM 140 mm fans (front x2, rear x1).
- Supports up to 420 mm front radiator and up to 495 mm GPU length.
- Preinstalled ARGB controller and fan controller; front I/O includes USB-C 3.2 Gen 2.
- 3-year manufacturer warranty (authorized reseller purchase required).
Search for 67,706 Manuals online
Type-in Brand or Model