Manual.ly Logo

be quiet! Dark Base 701 Manual

0.0 · 0 Ratings

PDF manual · 42 Pages

English

M: QW-35-FL
page

/ 42

Loading...
911b0dc6ec6c3fc803f04674e14c2864a724 page 29
39
Limited Warranty
As per the terms and conditions of this limited warranty as given below, be quiet! warrants its new products to
be free of defects resulting from faulty materials and faulty manufacturing for the length of the warranty period.
I. APPLICABILITY
This non-transferable warranty is applicable to newly purchased, previously unopened be quiet! prod-
ucts and is enforceable by only the original consumer purchaser. Proof of purchase is required for
warranty service, so should be retained. be quiet! does not provide warranty registration services.
II. WARRANTY PERIOD
For eligible products, parts and labor are warranted for the applicable warranty period from the date of
purchase. The applicable warranty period varies by product model, and is identified in your user docu-
mentation, on the product package, or as listed below. Should any of these warranty periods differ, the
longest specified warranty period will apply. Replaced products will be warranted for the remainder of
the original warranty period or thirty days, whichever is longer.
III. EXCLUSIONS
The following are not covered by the warranty:
1. Normal wear and tear.
2. Any product which has been modified without permission from be quiet!, or on which the serial num-
ber or warranty sticker has been defaced, modified, or removed.
3. Damage, deterioration or malfunction resulting from:
Accident, abuse, misuse or improper use, neglect, connection to an improper voltage source, unau-
thorized product modification, or failure to follow instructions included with the product.
Fire, water, lightning, or other acts of nature.
Repair or attempted repair by anyone not authorized by be quiet!.
Shipping or transport damage (claims must be made with the carrier).
Any other cause which does not relate to a defect in materials or manufacturing workmanship.
4. Cartons, cases, batteries, cabinets, tapes, accessories or other consumables used with this product.
5. be quiet!, Inc. does not warrant that this product will meet your requirements. It is your responsibility
to determine the suitability of this product for your purpose.
6. Removal or installation charges.
7. Shipping charges.
8. Any incidental charges.
IV. EXCLUSION OF DAMAGES
be quiet!‘s sole obligation and liability under this warranty is limited to the repair or replacement of a
defective product at its option. be quiet! shall not, in any event, be liable for any special, incidental,
indirect, or consequential damages whatsoever, including but not limited to loss of profits, revenue, or
data (whether direct or indirect), damages resulting from interruption of service and loss of business,
or for liability in tort relating to this product or resulting from its use or possession, even if be quiet! has
been advised previously of the possibility of such damages.
V. LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not limited to those of merchant-
ability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty
length specified in Paragraph II.
VI. LOCAL LAW AND YOUR WARRANTY
This warranty gives you specific legal rights. You may also have other rights granted under local law.
These rights may vary.
VII. NO OTHER WARRANTY
No be quiet! employee, dealer, or other agent is authorized to make any modification, extension, or
addition to this warranty.
VIII. TO OBTAIN TECHNICAL SUPPORT OR WARRANTY SERVICE
Please see your product owner’s manual or visit the service section at www.bequiet.com for details and
contact information. You will need to provide proof of purchase for warranty service.

Chat with your be quiet! Dark Base 701 manual using AI

Get instant AI answers from your be quiet! Dark Base 701 manual

Ask anything about the be quiet! Dark Base 701. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Dark Base 701?

Yes No

Frequently Asked Questions

A

The case supports E-ATX, ATX, M-ATX, and Mini-ITX motherboards. E-ATX boards can measure up to 30.5 x 27.5cm.

Is this answer helpful?

A

There is a three-year manufacturer warranty for the original consumer purchaser from authorized be quiet! dealers. Original receipt is required.

Is this answer helpful?

A

No, a power supply unit is not included in the package. It is an ATX PS2 form factor compatible case.

Is this answer helpful?

A

Graphics card clearance allows for GPUs up to 430mm in length without obstruction within the chassis.

Is this answer helpful?

A

Yes, it supports radiators up to 360mm on the front, top, and rear panels for liquid cooling systems.

Is this answer helpful?

A

Yes, the case supports an inverted layout option which allows for creative cable management and component exposure.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports E-ATX motherboards and large GPUs up to 430mm
  • Includes three pre-installed Silent Wings 4 fans for cooling
  • Comprehensive airflow options with up to 360mm radiator support
  • Inverted layout capability provides flexible build customization
  • Robust warranty coverage of three years for consumer
VS

Disadvantages

  • Power supply unit is not included in the base package
  • The case is heavy at 12.8 kg, which impacts portability
  • Some expansion components like riser cables are sold separately
  • Installation requires significant space due to large dimensions
  • Specific screw types are needed which might require searching
M: QW-35-FL

Product Specification

External

N/A

Internal

1x 3.5" (Horizontal, Drive Cage), 2x 3.5", 2x 2.5", 1x 2.5" (optional), 2x 3.5" (optional)

Ports

1x USB-C 3.1 (10Gb/s, 20-Pin Key-A Header), 2x USB-A 3.0 (5Gb/s), 1x 3.5mm Jack (Line-Out), 1x 3.5mm Jack (Line-In)

PCI Slots

10 (3x Riser Card)

Fan (Front)

1x 5.51 inch (140mm), 1900rpm, 0.09 inH2O, 78.39 CFM, 29.3dB(A) or 3x 5.51 inch (140mm) (optional)

Fan (Rear)

1x 5.51 inch (140mm), 1900rpm, 0.09 inH2O, 78.39 CFM, 29.3dB(A)

Fan (Left)

N/A

Fan (Right)

N/A

Fan (Top)

1x 5.51 inch (140mm), 1900rpm, 0.09 inH2O, 78.39 CFM, 29.3dB(A) or 3x 5.51 inch (140mm) (optional)

Fan (Bottom)

1x 5.51 inch (140mm) (optional)

Fan (Other)

N/A

Radiator Sizes

4.72/5.51/9.45/11.02/14.17 inches Front, 4.72/5.51/9.45/11.02/14.17 inches Top, 4.72 inches Rear

Motherboard

up to ATX (10.79 inches wide)

Supported Motherboards

Mini-ITX (6.7"x6.7") / µATX (9.6"x9.6") / ATX (12"x9.6") / E-ATX (12"x10.8")

Power Supply

ATX (max. 9.84 inches deep)

Power Supply Position

Bottom

CPU Cooler

max. 7.28 inches height

Graphics Cards

max. 16.93 inches

Lighting

RGB Header 3-Pin ARGB (+5V/DATA/GND), Integrated LED Controller, Integrated RGB LED Lighting

Dimensions (WxHxD)

9.80x20.59x22.24 inches (with feet), 9.80x19.49x22.24 inches (without feet)

Volume

19.43 gallons (73.6L) (with feet), 18.40 gallons (69.6L) (without feet)

Weight

28.22 lbs

Chassis Type

Midi Tower

Front

Mesh, Dust Filter Inside

Top

Mesh, Mostly Fan Grille

Bottom

Partially Closed, Mostly Fan Grille, Dust Filter Outside

Left

Closed, Glass

Right

Mesh

Rear

Partially Closed, Fan Grille Top Right, PCI Slots (7x Horizontal, 3x Vertical)

Front I/O Position

Chassis Side: Top, Height: Front, Position: Center

Motherboard Orientation

Modular Motherboard Orientation: Right or Left; Ports: Rear Ports

Features

Integrated Fan Controller, Cable Management, Dust Filters, Motherboard Bracket, Graphics Card Vertical Mounting, Glass Viewing Window

E-ATX Note

Motherboard and Chassis Manufacturers Designate Different Dimensions as E-ATX. Motherboards with E-ATX/SSI EEB Dimensions of 305x330mm (12.01"x12.99") or 12"x13" are not supported.

USB Layout

Left

M: QW-35-FL

Product Description

Top Tier PC Case

The chassis is crucial for PC aesthetics. The be quiet! Dark Base 701 is a premium choice for enthusiasts. Referencing the be quiet! Dark Base 701 Manual, this case accommodates various hardware. It supports E-ATX motherboards measuring 30.5 x 27.5cm. It also covers ATX, M-ATX, and Mini-ITX boards.

Build quality utilizes high-grade steel and ABS materials. Weighing 12.8kg net, this tower is robust. It features a footprint of 565mm length. Front I/O connectivity is comprehensive. It includes USB 3.2 Gen. 2 Type C port. Two additional USB 3.2 ports are present. There is an HD audio jack. Additionally, there is a built-in fan controller. An ARGB hub allows managing lighting effects.

Cooling capabilities are exceptional. The unit includes pre-installed Silent Wings 4 140mm fans. These are at the front, top, and rear. They provide airflow upon unboxing. Users can mount radiators up to 360mm on the panels. This suits advanced liquid cooling systems. Graphics card clearance reaches 430mm. CPU cooler height clearance reaches 185mm.

Storage flexibility is a strong point. It houses five 2.5-inch drives and three 3.5-inch drives. Installation notes indicate removable caging. One unique feature is the inverted layout option. This allows creative cable routing. The case offers optional windowed side panels. ARGB modes include comet trails and rainbows.

Warranty terms are clear for consumers. A three-year warranty applies to original purchasers from authorized dealers. Manipulations may void the warranty. Original receipt maintenance is essential. Listan GmbH is the manufacturer. Diagrams assist with assembly steps.

Notes: Check regional service contacts on the website for details. Keep packaging for transport claims or shipping safely. Verify component compatibility before purchasing parts for your build. Avoid unauthorized modifications to protect the warranty coverage.

M: QW-35-FL

© Copyright 2026 Manual.ly