Manual.ly Logo

Axkid Modukid Seat Manual

0.0 · 0 Ratings

PDF manual · 62 Pages

English

M: OA-GPT-5-NAN
page

/ 62

Loading...
45d912c37fb6af520b2fd0bd6a58bf1aa6e0 page 7
3
EN
Axkid Modukid Seat
Instruction manual
Car seat for children weighing up to 18kg
Read this instruction manual carefully before installing the Axkid Modukid Seat. If in doubt, contact
your retailer who can demonstrate a correct installation. An incorrect installation could endanger
your child.
Do not use a car seat in a seating position where an active airbag is tted. If you still wish to install
the Axkid Modukid Seat in this location the airbag must be switched o according to the vehicle
manufacturers instructions.
Extensive research has shown that the risk of serious injury is ve times greater for a young child
when travelling in a forward-facing car seat compared to a rear-facing car seat.
Should you have an accident, no matter how small, your car seat should always be replaced. It may
have damage that is undetectable and could seriously jeopardize your child’s safety. For this reason,
Axkid does not recommend purchasing second hand car seats.
Never leave your child unattended in the car.
Ensure any luggage or loose objects are secured in your vehicle as they may cause injuries to
passengers in the event of a collision.
Keep this instruction manual for future reference.
Ensure that the car seat is installed in a way where no parts become trapped by movable seats, car
doors, etc.
The Axkid Modukid Seat is suitable for use from when the child can sit steadily, approximately six to
nine months of age until the child is about 4 years old.
Never use the car seat without its textile cover.
This car seat may ONLY be installed together with the Axkid Modukid Base.
This car seat may ONLY be installed rear-facing.
Read this instruction manual before installing the Axkid Modukid Seat in your vehicle. For
more information and installation videos visit www.axkid.com.
Thank you for choosing an Axkid product. Our team has over 30 years combined experience within child
safety, and we have done our utmost to make the Axkid Modukid Seat as safe as possible. The Axkid
Modukid Seat is approved according to UN Regulation no 129/03. To maximize your child’s safety, it is
important that you keep the following in mind:
Important information

Chat with your Axkid Modukid Seat manual using AI

Get instant AI answers from your Axkid Modukid Seat manual

Ask anything about the Axkid Modukid Seat. Answers come from this manual, with the pages they are based on.

Modukid Seat Maintenance Schedule

As needed
Wash seat cover

Remove and machine wash at 30 C on gentle cycle. Do not use a dryer.

Show in the manual (page 11)
As needed
Clean plastic parts

Wipe with mild detergent and water. Do not use aggressive chemicals or solvents.

Show in the manual (page 11)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Modukid Seat?

Yes No

Frequently Asked Questions

A

The seat is designed for children approximately from when they can sit steadily (about 6–9 months) up to around 4 years old; suitable for children 61–105 cm and up to 18 kg.

Is this answer helpful?

A

No. The Axkid Modukid Seat may only be installed and used together with the Axkid Modukid Base. Using other bases or vehicle belt mounting is unsafe and not permitted.

Is this answer helpful?

A

Never install the seat on a seat with an active airbag. If you must use that position, the vehicle airbag must be deactivated by an authorized service and you must verify the vehicle indicator confirms the airbag is off.

Is this answer helpful?

A

Loosen the harness, place the child, then pull the belt adjustment strap centrally to tighten; the headrest will automatically slide to the correct height. Activate the headrest lock by moving the lock lever to secure it in place.

Is this answer helpful?

A

Remove the textile cover and wash at 30°C on a gentle cycle; do not tumble dry. Clean plastic parts with mild detergent and water. Use only original Axkid replacement covers and follow manufacturer care instructions.

Is this answer helpful?

A

Replace the seat after any collision, regardless of damage visibility. The seat may have hidden damage that could compromise child safety; Axkid advises against using second-hand seats.

Is this answer helpful?

A

The seat has a 24-month warranty from the date of purchase. Warranty does not cover normal wear, UV fading, damage from misuse, accidents, or repairs by third parties; keep your purchase receipt for claims.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Rear-facing design prioritizes crash protection for young children, aligned with UN R129/03.
  • Three recline positions and adjustable headrest for comfort and correct harness fit as the child grows.
  • ASIP side impact pads and ISOFIX base with support leg provide strong lateral and stability protection.
  • Automatic headrest adjustment when tightening harness simplifies correct fit.
  • Removable washable cover and recyclable materials with manufacturer support and videos.
VS

Disadvantages

  • Must be used only with the Axkid Modukid Base, limiting flexibility for vehicles without ISOFIX-compatible bases.
  • Cannot be installed on seats with active airbags unless the airbag is professionally deactivated.
  • Not suitable for forward-facing, rearward- or side-facing vehicle seats—rear-facing only.
  • Seat must be replaced after any collision; no recommendation for second-hand purchases.
  • Warranty excludes normal wear, misuse, UV fading and third-party repairs.
M: OA-GPT-5-NAN

Product Specification

Group

i-Size

Weight Class

0-39.68lb

Age Class

0-4Y

Harness Technology

Five-point safety harness

Installation

Rear-facing

Isofix

yes, suitable for Isofix base

Features

height-adjustable headrest, side impact protection, adjustable seating position, recline position, color indicator

Dimensions (WxHxD)

16.93x24.41x20.47in

Weight

16.53lb

M: OA-GPT-54-NAN

Product Description

Axkid Modukid Seat — Safe, Adjustable Rear-Facing Car Seat

The Axkid Modukid Seat is a rear-facing child car seat designed for children approximately 6–9 months up to about 4 years (61–105 cm, up to 18 kg). Engineered by Axkid and approved under UN Regulation No. 129/03, the Modukid Seat pairs exclusively with the Axkid Modukid Base and is built to prioritize crash safety, ease of use and long-term comfort.

Key features and design

The seat is rear-facing only and must be used with the dedicated Modukid Base, which installs on passenger seats equipped with ISOFIX. The seat offers three recline positions to keep younger children comfortable and to adapt as they grow. A height-adjustable headrest works together with the harness: tightening the central belt automatically lowers the headrest to the correct position and a headrest lock/ brake lets you secure it in place.

An optional headrest insert is provided for smaller infants (roughly 9–18 months) to improve fit and support. The seat includes Axkid Side Impact Protection (ASIP) pads that click into dedicated connectors for improved lateral protection. A sturdy support leg on the base provides stability and emits audible feedback when properly installed.

Safety and installation

Axkid emphasizes rear-facing travel for as long as possible, noting rear-facing use dramatically reduces severe injury risk compared to forward-facing seats. Never install the Modukid Seat where an active airbag is present unless the vehicle airbag is deactivated by the manufacturer or authorized service. The seat must not be used on seats without ISOFIX or on sideways/rearward vehicle seats. After any collision, the seat should be replaced.

Installation is done by clicking the seat onto the Modukid Base, confirming the support leg is clamped to the floor and the installation buzzer has stopped. The ASIP pads attach by aligning triangular arrows and sliding until a click confirms secure fit.

Care, maintenance and warranty

The textile cover is removable and machine washable at 30°C on a gentle cycle; do not tumble dry. Plastic parts can be cleaned with mild detergent and water; avoid solvent-based cleaners. Only original Axkid replacement covers should be used. Materials are recyclable; follow local recycling rules. The seat carries a 24-month warranty from purchase, excluding normal wear, misuse, accidents, or third-party repairs.

Final thoughts

The Axkid Modukid Seat is a focused solution for caregivers who want prolonged rear-facing protection, intuitive harness/headrest adjustment, and modular side-impact protection. Its mandatory use with the Modukid Base ensures consistent installation behavior and leverages ISOFIX stability for everyday safety.

Notes

  • Always follow vehicle manufacturer guidance on airbag deactivation before installing on a seat with an airbag.
  • Replace the seat after any crash, even minor impacts.
  • Use only Axkid original spare parts and covers to preserve safety performance.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly